[Sun Sep  2 10:33:16 2012] Detection parameters:
  Position = (398.5, 394.1) = 15 3 15.35 -41 41 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.6 +/- 16.8
  Background counts = 16.1
  Rate = 0.03 +/- 0.004

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 10.04'
[Sun Sep  2 17:28:01 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 17:28:01 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Sun Sep  2 17:28:01 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.071
[Sun Sep  2 17:28:01 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 11.45"
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src39.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src39.csv
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src39.csv
[Sun Sep  2 23:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Sep  2 23:15:37 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Sep  3 04:47:21 2012] Warning, spatial fit 39 centroid is now closest to src. 45
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 60
[Mon Sep  3 04:47:22 2012] Source is confused with source 45
[Mon Sep  3 10:59:50 2012] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 11.45"
[Mon Sep  3 10:59:50 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.071
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 11.45"
[Mon Sep  3 18:15:57 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src35.ximg exists
[Mon Sep  3 18:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src35.csv
[Mon Sep  3 18:15:57 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon Sep  3 18:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src35.csv
[Mon Sep  3 18:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:16:00 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon Sep  3 18:16:00 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon Sep  3 18:16:00 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Tue Sep  4 01:00:26 2012] Warning, spatial fit 35 centroid is now closest to src. 62
[Tue Sep  4 01:00:26 2012] Spatial fit model total counts = 558.496000, observed total counts = 558.000000
[Tue Sep  4 01:00:26 2012] Offset between fit and detection position for source 44 = 5.482319 pixels
[Tue Sep  4 01:00:26 2012] Warning, changing simple spatial fit ID from 35 to 81
[Tue Sep  4 01:00:26 2012] 529.230900 total counts/ 56.882900 bgd. counts: snr = 62.628385
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 5.482319 pixels
  Position = (404.0, 394.2) = 15 3 13.22 -41 41 28.8
  Extent = 23.7 (23.7-47.4)", rotation angle = 0
  Source counts = 472.3 +/- 23.0
  Background counts = 56.9
  Rate = 0.06 +/- 0.003
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:54 2012] XMMSAS src. selection expression = ellipse(35100.892000, 34243.340000, 1423.350041, 1423.350041, 0.000000, X, Y)
[Tue Sep  4 02:08:54 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src44_src.reg
[Tue Sep  4 02:08:54 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (322, 312) - (486, 476)
[Tue Sep  4 02:08:54 2012] XMMSAS bgd. selection expression = annulus(35100.892000, 34243.340000, 2372.250068, 4744.500137, X, Y) && !ellipse(30296.478000, 30840.776000, 2753.472079, 2753.472079, 0.000000, X, Y) && !ellipse(29605.250000, 32691.400000, 1418.216041, 1418.216041, 0.000000, X, Y) && !ellipse(30412.274109, 32893.693695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31700.303162, 33630.453705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35193.402000, 34524.698000, 1808.392052, 1808.392052, 0.000000, X, Y) && !ellipse(29396.188000, 33049.608000, 2948.128085, 2948.128085, 0.000000, X, Y) && !ellipse(33302.280000, 34159.749000, 1709.984049, 1709.984049, 0.000000, X, Y) && !ellipse(34271.272000, 34217.938400, 1792.120052, 1792.120052, 0.000000, X, Y) && !ellipse(29161.606000, 30047.264000, 1414.600041, 1414.600041, 0.000000, X, Y) && !ellipse(34436.608215, 32831.759827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29566.767000, 30352.640000, 1732.352050, 1732.352050, 0.000000, X, Y) && !ellipse(36426.538000, 34844.446000, 1897.800055, 1897.800055, 0.000000, X, Y) && !ellipse(29607.504000, 30992.230000, 1457.416042, 1457.416042, 0.000000, X, Y) && !ellipse(30064.552887, 31453.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.962830, 32055.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.784000, 31798.144000, 1489.872043, 1489.872043, 0.000000, X, Y) && !ellipse(34792.862701, 33532.621185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34044.125854, 33359.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31288.824066, 31666.799347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.403839, 34008.006836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30174.216217, 33880.979614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33472.545837, 32677.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35745.763336, 34480.965790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32091.184540, 34130.892212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.226349, 32658.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.901428, 31009.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32678.965546, 33013.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29769.630000, 30526.532000, 2829.200081, 2829.200081, 0.000000, X, Y)
[Tue Sep  4 02:08:54 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src44.gif
[Tue Sep  4 02:35:17 2012] Mean detx,y = (3012.23, 9905.03) 
[Tue Sep  4 02:35:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:35:49 2012] grppha failed
[Tue Sep  4 02:35:49 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src44_src.pi.gz
[Tue Sep  4 02:35:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src44_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Flag c found in src. 44 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Source 44 has no response, skipping
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete