[Sun Sep  2 10:33:15 2012] Detection parameters:
  Position = (364.9, 387.1) = 15 3 28.39 -41 42 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.6 +/- 19.6
  Background counts = 17.5
  Rate = 0.05 +/- 0.004

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 8.04'
[Sun Sep  2 17:28:01 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 17:28:01 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Sun Sep  2 17:28:01 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.742
[Sun Sep  2 17:28:01 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.45"
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src25.csv
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src25.csv
[Sun Sep  2 23:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Sep  2 23:15:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Sep  2 23:15:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Sep  2 23:15:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:21 2012] Warning, spatial fit 25 centroid is now closest to src. 74
[Mon Sep  3 04:47:22 2012] Spatial fit model total counts = 801.529000, observed total counts = 694.000000
[Mon Sep  3 04:47:22 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:22 2012] Spatial fit model total counts = 892.914000, observed total counts = 811.000000
[Mon Sep  3 04:47:22 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 41
[Mon Sep  3 04:47:22 2012] Source is confused with source 65
[Mon Sep  3 10:59:50 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Mon Sep  3 10:59:50 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.742
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 10.45"
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src22.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src22.csv
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src22.csv
[Mon Sep  3 18:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon Sep  3 18:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon Sep  3 18:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon Sep  3 18:15:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:25 2012] Warning, spatial fit 22 centroid is now closest to src. 65
[Tue Sep  4 01:00:26 2012] Source 37 is offset by 1.404841 and 4.638341 pixels which is larger than
2 X fitted extent = 1.190492 x 1.190492, not incorporating fit results
[Tue Sep  4 01:00:26 2012] Spatial fit model total counts = 766.112000, observed total counts = 694.000000
[Tue Sep  4 01:00:26 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 01:00:26 2012] Source 37 is offset by -2.607734 and 4.288043 pixels which is larger than
2 X fitted extent = 4.159085 x 4.159085, not incorporating fit results
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:53 2012] XMMSAS src. selection expression = ellipse(31700.303162, 33630.453705, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 02:08:53 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src37_src.reg
[Tue Sep  4 02:08:53 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (327, 350) - (402, 425)
[Tue Sep  4 02:08:53 2012] XMMSAS bgd. selection expression = annulus(31700.303162, 33630.453705, 1087.500000, 2175.000000, X, Y) && !ellipse(30296.478000, 30840.776000, 2753.472079, 2753.472079, 0.000000, X, Y) && !ellipse(29605.250000, 32691.400000, 1418.216041, 1418.216041, 0.000000, X, Y) && !ellipse(30412.274109, 32893.693695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28683.236000, 32498.536000, 1474.296042, 1474.296042, 0.000000, X, Y) && !ellipse(35100.892000, 34243.340000, 1897.800055, 1897.800055, 0.000000, X, Y) && !ellipse(35193.402000, 34524.698000, 1808.392052, 1808.392052, 0.000000, X, Y) && !ellipse(28953.972717, 33361.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29396.188000, 33049.608000, 2948.128085, 2948.128085, 0.000000, X, Y) && !ellipse(33302.280000, 34159.749000, 1709.984049, 1709.984049, 0.000000, X, Y) && !ellipse(34271.272000, 34217.938400, 1792.120052, 1792.120052, 0.000000, X, Y) && !ellipse(29161.606000, 30047.264000, 1414.600041, 1414.600041, 0.000000, X, Y) && !ellipse(34436.608215, 32831.759827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29566.767000, 30352.640000, 1732.352050, 1732.352050, 0.000000, X, Y) && !ellipse(28359.668000, 30929.109200, 1384.648040, 1384.648040, 0.000000, X, Y) && !ellipse(29607.504000, 30992.230000, 1457.416042, 1457.416042, 0.000000, X, Y) && !ellipse(30064.552887, 31453.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.962830, 32055.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.784000, 31798.144000, 1489.872043, 1489.872043, 0.000000, X, Y) && !ellipse(34044.125854, 33359.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31288.824066, 31666.799347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.403839, 34008.006836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30174.216217, 33880.979614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33472.545837, 32677.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32091.184540, 34130.892212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.226349, 32658.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.901428, 31009.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32678.965546, 33013.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29769.630000, 30526.532000, 2829.200081, 2829.200081, 0.000000, X, Y)
[Tue Sep  4 02:08:53 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src37.gif
[Tue Sep  4 02:25:45 2012] Mean detx,y = (3778.52, 6808.09) 
[Tue Sep  4 02:25:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:25:57 2012] grppha failed
[Tue Sep  4 02:25:58 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src37_src.pi.gz
[Tue Sep  4 02:25:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Sep  4 03:05:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 03:05:56 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src37_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete