[Sun Sep  2 10:33:15 2012] Detection parameters:
  Position = (256.7, 183.1) = 15 4 10.47 -41 56 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.8 +/- 17.2
  Background counts = 27.3
  Rate = 0.02 +/- 0.002

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 8.89'
[Sun Sep  2 17:28:02 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:02 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Sun Sep  2 17:28:02 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 1.000
[Sun Sep  2 17:28:02 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 10.88"
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src87.ximg exists
[Sun Sep  2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src87.csv
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src87_1.ximg exists
[Sun Sep  2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src87.csv
[Sun Sep  2 23:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Sun Sep  2 23:15:38 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Mon Sep  3 04:47:22 2012] Warning, spatial fit 87 centroid is now closest to src. 57
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 133
[Mon Sep  3 10:59:50 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Mon Sep  3 10:59:50 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 1.000
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 77 for pass 1, mean size = 10.88"
[Mon Sep  3 18:15:58 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src77.ximg exists
[Mon Sep  3 18:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src77.csv
[Mon Sep  3 18:15:58 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src77_1.ximg exists
[Mon Sep  3 18:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src77.csv
[Mon Sep  3 18:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:16:01 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Mon Sep  3 18:16:01 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Mon Sep  3 18:16:01 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Tue Sep  4 01:00:26 2012] Spatial fit model total counts = 814.056000, observed total counts = 813.000000
[Tue Sep  4 01:00:26 2012] Offset between fit and detection position for source 36 = 0.776130 pixels
[Tue Sep  4 01:00:26 2012] 816.188000 total counts/ 675.917000 bgd. counts: snr = 5.395370
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.776130 pixels
  Position = (257.5, 183.3) = 15 4 10.19 -41 56 46.2
  Extent = 15.5 (4.1-21.8)", rotation angle = 0
  Source counts = 140.3 +/- 28.6
  Background counts = 675.9
  Rate = 0.02 +/- 0.004
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:57 2012] XMMSAS src. selection expression = ellipse(22352.010600, 15901.880600, 931.104027, 931.104027, 0.000000, X, Y)
[Tue Sep  4 02:08:57 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src36_src.reg
[Tue Sep  4 02:08:57 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (204, 130) - (311, 237)
[Tue Sep  4 02:08:57 2012] XMMSAS bgd. selection expression = annulus(22352.010600, 15901.880600, 1551.840045, 3103.680089, X, Y) && !ellipse(22381.718800, 18281.726000, 1620.472047, 1620.472047, 0.000000, X, Y) && !ellipse(23280.873383, 19097.433990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23291.031525, 18334.640091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22344.502960, 17786.753555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22378.728943, 19074.973770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22348.883759, 17009.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21636.011200, 16150.047800, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(22919.701782, 16832.193527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22135.630478, 14046.439880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21257.478000, 14523.248000, 1806.312052, 1806.312052, 0.000000, X, Y) && !ellipse(22193.788895, 15256.053970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.910600, 13740.802000, 1642.920047, 1642.920047, 0.000000, X, Y) && !ellipse(21689.051895, 17169.092850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.492325, 16551.721542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21570.107910, 15793.779709, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 02:08:57 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src36.gif
[Tue Sep  4 02:53:03 2012] Mean detx,y = (-9537.89, -8172.42) 
[Tue Sep  4 02:53:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:53:17 2012] grppha failed
[Tue Sep  4 02:53:17 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src36_src.pi.gz
[Tue Sep  4 02:53:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue Sep  4 04:30:01 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:01 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src36_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Flag c found in src. 36 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Source 36 has no response, skipping
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete