[Sun Sep  2 10:33:15 2012] Detection parameters:
  Position = (278.9, 250.0) = 15 4 1.84 -41 51 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.7 +/- 21.8
  Background counts = 44.2
  Rate = 0.04 +/- 0.004

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 3.79'
[Sun Sep  2 17:28:01 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:01 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Sun Sep  2 17:28:01 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.859
[Sun Sep  2 17:28:01 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.32"
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src31.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src31.csv
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src31.csv
[Sun Sep  2 23:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Sep  2 23:15:37 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Mon Sep  3 04:47:21 2012] Source 34 is offset by -0.460044 and -8.656548 pixels which is larger than
2 X fitted extent = 0.917154 x 0.917154, not incorporating fit results
[Mon Sep  3 04:47:21 2012] Warning, spatial fit 31 centroid is now closest to src. 118
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 10:59:50 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Mon Sep  3 10:59:50 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.859
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 8.32"
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src28.ximg exists
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Sep  3 18:15:56 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src28 appears to have run properly
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Sep  3 18:15:59 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Sep  4 01:00:25 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 19.053689 pixels away
[Tue Sep  4 01:00:26 2012] Warning, spatial fit 28 centroid is now closest to src. 3
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:00:26 2012] Source is confused with source 5
[Tue Sep  4 02:08:54 2012] XMMSAS src. selection expression = ellipse(24213.816162, 21702.040298, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 02:08:54 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src34_src.reg
[Tue Sep  4 02:08:54 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (241, 213) - (316, 288)
[Tue Sep  4 02:08:54 2012] XMMSAS bgd. selection expression = annulus(24213.816162, 21702.040298, 1087.500000, 2175.000000, X, Y) && !ellipse(23227.852000, 22221.610000, 1305.128038, 1305.128038, 0.000000, X, Y) && !ellipse(23079.441605, 21860.557550, 1362.608039, 531.552589, 113.960904, X, Y) && !ellipse(22680.573000, 20833.848000, 1396.360040, 1396.360040, 0.000000, X, Y) && !ellipse(23598.308685, 23003.244934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22989.274800, 21405.580000, 2064.432059, 2064.432059, 0.000000, X, Y) && !ellipse(23667.074800, 24114.387400, 1223.672035, 1223.672035, 0.000000, X, Y) && !ellipse(22381.718800, 18281.726000, 1620.472047, 1620.472047, 0.000000, X, Y) && !ellipse(24243.008000, 24326.032000, 848.168024, 848.168024, 0.000000, X, Y) && !ellipse(23639.263600, 24592.327340, 845.184024, 845.184024, 0.000000, X, Y) && !ellipse(23280.873383, 19097.433990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24075.018000, 20530.060400, 1426.464041, 1426.464041, 0.000000, X, Y) && !ellipse(22378.728943, 19074.973770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26164.235800, 24256.945200, 971.192028, 971.192028, 0.000000, X, Y) && !ellipse(25290.133179, 24222.909637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26614.806946, 23790.174377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25190.670000, 20683.388000, 1353.912039, 1353.912039, 0.000000, X, Y) && !ellipse(26059.661560, 23273.834900, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 02:08:54 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src34.gif
[Tue Sep  4 02:27:09 2012] Mean detx,y = (-4724.30, -4467.42) 
[Tue Sep  4 02:27:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:27:18 2012] grppha failed
[Tue Sep  4 02:27:18 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src34_src.pi.gz
[Tue Sep  4 02:27:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Tue Sep  4 03:05:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 03:05:57 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src34_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete