[Sun Sep  2 10:33:15 2012] Detection parameters:
  Position = (299.0, 349.9) = 15 3 54.00 -41 44 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 275.0 +/- 22.6
  Background counts = 25.1
  Rate = 0.04 +/- 0.003

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 3.73'
[Sun Sep  2 17:28:01 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:01 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Sun Sep  2 17:28:01 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863
[Sun Sep  2 17:28:01 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.29"
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src32.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src32.csv
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src32_1.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src32.csv
[Sun Sep  2 23:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sun Sep  2 23:15:37 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Mon Sep  3 04:47:21 2012] Source 28 is offset by 1.700044 and 2.595735 pixels which is larger than
2 X fitted extent = 0.911467 x 0.911467, not incorporating fit results
[Mon Sep  3 04:47:21 2012] Spatial fit model total counts = 1358.840000, observed total counts = 1359.000000
[Mon Sep  3 04:47:21 2012] Offset between fit and detection position for source 28 = 5.539306 pixels
[Mon Sep  3 04:47:21 2012] 1380.116000 total counts/ 1035.160000 bgd. counts: snr = 10.721609
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 5.539306 pixels
  Position = (295.5, 345.6) = 15 3 55.35 -41 45 0.6
  Extent = 16.6 (16.5-33.2)", rotation angle = 0
  Source counts = 345.0 +/- 37.1
  Background counts = 1035.2
  Rate = 0.05 +/- 0.005
[Mon Sep  3 04:47:21 2012] Spatial fit model total counts = 1614.420000, observed total counts = 1609.000000
[Mon Sep  3 04:47:21 2012] Offset between fit and detection position for source 28 = 4.137366 pixels
[Mon Sep  3 04:47:21 2012] Warning, changing simple spatial fit ID from 32 to 60
[Mon Sep  3 04:47:21 2012] 1621.632000 total counts/ 1370.560000 bgd. counts: snr = 6.781867
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 4.137366 pixels
  Position = (298.7, 348.2) = 15 3 54.10 -41 44 49.3
  Extent = 16.7 (16.7-33.4)", rotation angle = 0
  Source counts = 251.1 +/- 40.3
  Background counts = 1370.6
  Rate = 0.03 +/- 0.005
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 51
[Mon Sep  3 04:47:22 2012] Source is confused with source 96
[Mon Sep  3 04:47:22 2012] Source is confused with source 94
[Mon Sep  3 10:59:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 16.69"
[Mon Sep  3 10:59:50 2012] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.077
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 16.69"
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src29.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src29.csv
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src29.csv
[Mon Sep  3 18:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Sep  3 18:15:59 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Sep  4 01:00:26 2012] Warning, spatial fit 29 centroid is now closest to src. 104
[Tue Sep  4 01:00:26 2012] Spatial fit model total counts = 3071.900000, observed total counts = 3050.000000
[Tue Sep  4 01:00:26 2012] Offset between fit and detection position for source 28 = 8.518090 pixels
[Tue Sep  4 01:00:26 2012] Warning, changing simple spatial fit ID from 29 to 53
[Tue Sep  4 01:00:26 2012] 2964.140000 total counts/ 1679.290000 bgd. counts: snr = 31.353756
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 8.518090 pixels
  Position = (293.9, 341.2) = 15 3 55.98 -41 45 19.8
  Extent = 32.5 (32.5-65.0)", rotation angle = 0
  Source counts = 1284.8 +/- 54.4
  Background counts = 1679.3
  Rate = 0.2 +/- 0.007
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:54 2012] Counts = 1284.850000, rescaling region sizes by 2.000000
[Tue Sep  4 02:08:54 2012] XMMSAS src. selection expression = ellipse(25522.384000, 29631.846000, 3899.376112, 3899.376112, 0.000000, X, Y)
[Tue Sep  4 02:08:54 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src28_src.reg
[Tue Sep  4 02:08:54 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (70, 117) - (518, 565)
[Tue Sep  4 02:08:54 2012] XMMSAS bgd. selection expression = annulus(25522.384000, 29631.846000, 12997.920374, 25995.840748, X, Y) && !ellipse(23227.852000, 22221.610000, 1305.128038, 1305.128038, 0.000000, X, Y) && !ellipse(23079.441605, 21860.557550, 1362.608039, 531.552589, 113.960904, X, Y) && !ellipse(22680.573000, 20833.848000, 1396.360040, 1396.360040, 0.000000, X, Y) && !ellipse(25751.763400, 27000.672000, 697.477620, 697.477620, 0.000000, X, Y) && !ellipse(23598.308685, 23003.244934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22989.274800, 21405.580000, 2064.432059, 2064.432059, 0.000000, X, Y) && !ellipse(24596.215600, 26874.504000, 852.328025, 852.328025, 0.000000, X, Y) && !ellipse(24437.787800, 26554.704000, 1035.768030, 1035.768030, 0.000000, X, Y) && !ellipse(24754.568000, 25464.026000, 1140.648033, 1140.648033, 0.000000, X, Y) && !ellipse(25172.150000, 26060.850000, 1062.224031, 1062.224031, 0.000000, X, Y) && !ellipse(23667.074800, 24114.387400, 1223.672035, 1223.672035, 0.000000, X, Y) && !ellipse(24495.857269, 25015.077454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25007.256666, 28117.564000, 1167.336034, 1167.336034, 0.000000, X, Y) && !ellipse(27668.615800, 31736.133600, 642.511218, 642.511218, 0.000000, X, Y) && !ellipse(22381.718800, 18281.726000, 1620.472047, 1620.472047, 0.000000, X, Y) && !ellipse(24243.008000, 24326.032000, 848.168024, 848.168024, 0.000000, X, Y) && !ellipse(30296.478000, 30840.776000, 2753.472079, 2753.472079, 0.000000, X, Y) && !ellipse(29605.250000, 32691.400000, 1418.216041, 1418.216041, 0.000000, X, Y) && !ellipse(25163.501220, 29377.672000, 431.060812, 431.060812, 0.000000, X, Y) && !ellipse(30412.274109, 32893.693695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31700.303162, 33630.453705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23616.242000, 25210.942000, 1155.680033, 1155.680033, 0.000000, X, Y) && !ellipse(26215.278600, 28976.512800, 901.456026, 901.456026, 0.000000, X, Y) && !ellipse(28683.236000, 32498.536000, 1474.296042, 1474.296042, 0.000000, X, Y) && !ellipse(26372.464000, 27577.054000, 1292.232037, 1292.232037, 0.000000, X, Y) && !ellipse(24892.673600, 28668.606200, 453.796813, 453.796813, 0.000000, X, Y) && !ellipse(24213.816162, 21702.040298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27842.018086, 28950.467504, 1355.853890, 734.349261, 132.666456, X, Y) && !ellipse(23639.263600, 24592.327340, 845.184024, 845.184024, 0.000000, X, Y) && !ellipse(26825.376000, 27973.660000, 1201.680035, 1201.680035, 0.000000, X, Y) && !ellipse(35100.892000, 34243.340000, 1897.800055, 1897.800055, 0.000000, X, Y) && !ellipse(35193.402000, 34524.698000, 1808.392052, 1808.392052, 0.000000, X, Y) && !ellipse(28834.558000, 29814.902000, 1312.496038, 1312.496038, 0.000000, X, Y) && !ellipse(28953.972717, 33361.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25715.288330, 25444.350555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29396.188000, 33049.608000, 2948.128085, 2948.128085, 0.000000, X, Y) && !ellipse(33302.280000, 34159.749000, 1709.984049, 1709.984049, 0.000000, X, Y) && !ellipse(26482.218000, 29947.130000, 1320.240038, 1320.240038, 0.000000, X, Y) && !ellipse(34271.272000, 34217.938400, 1792.120052, 1792.120052, 0.000000, X, Y) && !ellipse(26274.320000, 25310.094000, 664.272019, 664.272019, 0.000000, X, Y) && !ellipse(29161.606000, 30047.264000, 1414.600041, 1414.600041, 0.000000, X, Y) && !ellipse(30447.060303, 21181.261612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23280.873383, 19097.433990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34436.608215, 32831.759827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24075.018000, 20530.060400, 1426.464041, 1426.464041, 0.000000, X, Y) && !ellipse(27813.342926, 29761.951233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.653800, 30384.696000, 1299.792037, 1299.792037, 0.000000, X, Y) && !ellipse(28074.401337, 31269.434387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29566.767000, 30352.640000, 1732.352050, 1732.352050, 0.000000, X, Y) && !ellipse(28359.668000, 30929.109200, 1384.648040, 1384.648040, 0.000000, X, Y) && !ellipse(27226.111511, 29580.347229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.918701, 28491.525024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23291.031525, 18334.640091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26012.981600, 31255.531380, 1288.048037, 613.355218, 90.000000, X, Y) && !ellipse(36426.538000, 34844.446000, 1897.800055, 1897.800055, 0.000000, X, Y) && !ellipse(29607.504000, 30992.230000, 1457.416042, 1457.416042, 0.000000, X, Y) && !ellipse(22344.502960, 17786.753555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22378.728943, 19074.973770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.636902, 30403.262939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.800323, 24844.396240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.347137, 29371.515900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26164.235800, 24256.945200, 971.192028, 971.192028, 0.000000, X, Y) && !ellipse(30064.552887, 31453.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.962830, 32055.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.784000, 31798.144000, 1489.872043, 1489.872043, 0.000000, X, Y) && !ellipse(34792.862701, 33532.621185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34044.125854, 33359.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31288.824066, 31666.799347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.133179, 24222.909637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22352.010600, 15901.880600, 1241.472036, 1241.472036, 0.000000, X, Y) && !ellipse(30754.403839, 34008.006836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30174.216217, 33880.979614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33472.545837, 32677.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35745.763336, 34480.965790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32091.184540, 34130.892212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.226349, 32658.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22348.883759, 17009.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26614.806946, 23790.174377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21636.011200, 16150.047800, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(31294.901428, 31009.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32678.965546, 33013.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25190.670000, 20683.388000, 1353.912039, 1353.912039, 0.000000, X, Y) && !ellipse(22919.701782, 16832.193527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29769.630000, 30526.532000, 2829.200081, 2829.200081, 0.000000, X, Y) && !ellipse(26059.661560, 23273.834900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22135.630478, 14046.439880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21257.478000, 14523.248000, 1806.312052, 1806.312052, 0.000000, X, Y) && !ellipse(22193.788895, 15256.053970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.910600, 13740.802000, 1642.920047, 1642.920047, 0.000000, X, Y) && !ellipse(21689.051895, 17169.092850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.492325, 16551.721542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21570.107910, 15793.779709, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 02:08:54 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src28.gif
[Tue Sep  4 02:27:23 2012] Mean detx,y = (1158.50, 293.50) 
[Tue Sep  4 02:27:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:34:34 2012] grppha failed
[Tue Sep  4 02:34:34 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src28_src.pi.gz
[Tue Sep  4 02:34:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src28_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Flag b found in src. 28 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Flag c found in src. 28 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Source 28 has no response, skipping
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete