[Sun Sep  2 10:33:15 2012] Detection parameters:
  Position = (256.9, 214.9) = 15 4 10.40 -41 54 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.1 +/- 19.8
  Background counts = 29.3
  Rate = 0.05 +/- 0.005

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 6.76'
[Sun Sep  2 17:28:01 2012] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:01 2012] Initial guess for spatial extent in simple fitting = 9.81"
[Sun Sep  2 17:28:01 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.186
[Sun Sep  2 17:28:01 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.81"
[Sun Sep  2 23:15:33 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src18.ximg exists
[Sun Sep  2 23:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src18.csv
[Sun Sep  2 23:15:33 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src18_1.ximg exists
[Sun Sep  2 23:15:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src18.csv
[Sun Sep  2 23:15:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:36 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sun Sep  2 23:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Sep  2 23:15:36 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Sep  2 23:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sun Sep  2 23:15:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:21 2012] Warning, spatial fit 18 centroid is now closest to src. 125
[Mon Sep  3 04:47:21 2012] Spatial fit model total counts = 1016.120000, observed total counts = 990.000000
[Mon Sep  3 04:47:21 2012] Offset between fit and detection position for source 23 = 4.899582 pixels
[Mon Sep  3 04:47:21 2012] Warning, changing simple spatial fit ID from 18 to 71
[Mon Sep  3 04:47:21 2012] 966.883000 total counts/ 520.109000 bgd. counts: snr = 19.590283
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 4.899582 pixels
  Position = (257.4, 210.0) = 15 4 10.21 -41 54 50.0
  Extent = 20.2 (20.2-20.3)", rotation angle = 0
  Source counts = 446.8 +/- 31.1
  Background counts = 520.1
  Rate = 0.06 +/- 0.004
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 127
[Mon Sep  3 04:47:22 2012] Source is confused with source 35
[Mon Sep  3 04:47:22 2012] Source is confused with source 22
[Mon Sep  3 10:59:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 20.25"
[Mon Sep  3 10:59:50 2012] source mask rpix=4.7, npix_max = 106, mask sum = 108, frac = 1.016
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 20.25"
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src15.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src15.csv
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src15.csv
[Mon Sep  3 18:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon Sep  3 18:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Sep  3 18:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Mon Sep  3 18:15:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:25 2012] Warning, spatial fit 15 centroid is now closest to src. 131
[Tue Sep  4 01:00:26 2012] Spatial fit model total counts = 1014.920000, observed total counts = 990.000000
[Tue Sep  4 01:00:26 2012] Offset between fit and detection position for source 23 = 0.766619 pixels
[Tue Sep  4 01:00:26 2012] Warning, changing simple spatial fit ID from 15 to 63
[Tue Sep  4 01:00:26 2012] 882.840000 total counts/ 457.281000 bgd. counts: snr = 19.900693
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.766619 pixels
  Position = (257.8, 210.7) = 15 4 10.05 -41 54 47.2
  Extent = 20.3 (20.2-40.5)", rotation angle = 0
  Source counts = 425.6 +/- 29.7
  Background counts = 457.3
  Rate = 0.06 +/- 0.004
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:53 2012] XMMSAS src. selection expression = ellipse(22381.718800, 18281.726000, 1215.354035, 1215.354035, 0.000000, X, Y)
[Tue Sep  4 02:08:53 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src23_src.reg
[Tue Sep  4 02:08:53 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (188, 141) - (328, 281)
[Tue Sep  4 02:08:53 2012] XMMSAS bgd. selection expression = annulus(22381.718800, 18281.726000, 2025.590058, 4051.180117, X, Y) && !ellipse(23227.852000, 22221.610000, 1305.128038, 1305.128038, 0.000000, X, Y) && !ellipse(23079.441605, 21860.557550, 1362.608039, 531.552589, 113.960904, X, Y) && !ellipse(22680.573000, 20833.848000, 1396.360040, 1396.360040, 0.000000, X, Y) && !ellipse(23598.308685, 23003.244934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22989.274800, 21405.580000, 2064.432059, 2064.432059, 0.000000, X, Y) && !ellipse(24213.816162, 21702.040298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23280.873383, 19097.433990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24075.018000, 20530.060400, 1426.464041, 1426.464041, 0.000000, X, Y) && !ellipse(23291.031525, 18334.640091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22344.502960, 17786.753555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22378.728943, 19074.973770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22352.010600, 15901.880600, 1241.472036, 1241.472036, 0.000000, X, Y) && !ellipse(22348.883759, 17009.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21636.011200, 16150.047800, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(25190.670000, 20683.388000, 1353.912039, 1353.912039, 0.000000, X, Y) && !ellipse(22919.701782, 16832.193527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22135.630478, 14046.439880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21257.478000, 14523.248000, 1806.312052, 1806.312052, 0.000000, X, Y) && !ellipse(22193.788895, 15256.053970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.910600, 13740.802000, 1642.920047, 1642.920047, 0.000000, X, Y) && !ellipse(21689.051895, 17169.092850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.492325, 16551.721542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21570.107910, 15793.779709, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 02:08:53 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src23.gif
[Tue Sep  4 02:17:21 2012] Mean detx,y = (-7365.94, -7238.50) 
[Tue Sep  4 02:17:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:17:37 2012] grppha failed
[Tue Sep  4 02:17:38 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src23_src.pi.gz
[Tue Sep  4 02:17:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src23_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Flag c found in src. 23 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Source 23 has no response, skipping
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete