[Sun Sep  2 10:33:15 2012] Detection parameters:
  Position = (318.4, 365.0) = 15 3 46.46 -41 43 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 358.6 +/- 25.1
  Background counts = 29.0
  Rate = 0.05 +/- 0.004

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 5.04'
[Sun Sep  2 17:28:01 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:01 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Sun Sep  2 17:28:01 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.147
[Sun Sep  2 17:28:01 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.95"
[Sun Sep  2 23:15:33 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src17.ximg exists
[Sun Sep  2 23:15:33 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Sep  2 23:15:33 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src17 appears to have run properly
[Sun Sep  2 23:15:36 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Sep  2 23:15:36 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Sep  2 23:15:36 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Sep  3 04:47:21 2012] Spatial fit model total counts = 1917.660000, observed total counts = 1779.000000
[Mon Sep  3 04:47:21 2012] Offset between fit and detection position for source 16 = 0.379490 pixels
[Mon Sep  3 04:47:21 2012] 1798.164000 total counts/ 1696.380000 bgd. counts: snr = 2.471257
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.379490 pixels
  Position = (318.6, 365.3) = 15 3 46.39 -41 43 34.6
  Extent = 8.0 (5.0-11.5)", rotation angle = 0
  Source counts = 101.8 +/- 42.4
  Background counts = 1696.4
  Rate = 0.01 +/- 0.006
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 93
[Mon Sep  3 10:59:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Mon Sep  3 10:59:50 2012] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.135
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 8.03"
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src14.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src14.csv
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src14.csv
[Mon Sep  3 18:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Sep  3 18:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Sep  3 18:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Sep  3 18:15:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:25 2012] Spatial fit model total counts = 1997.640000, observed total counts = 1805.000000
[Tue Sep  4 01:00:25 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:53 2012] XMMSAS src. selection expression = ellipse(27668.615800, 31736.133600, 481.883414, 481.883414, 0.000000, X, Y)
[Tue Sep  4 02:08:53 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src16_src.reg
[Tue Sep  4 02:08:53 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (291, 338) - (346, 393)
[Tue Sep  4 02:08:53 2012] XMMSAS bgd. selection expression = annulus(27668.615800, 31736.133600, 803.139023, 1606.278046, X, Y) && !ellipse(30296.478000, 30840.776000, 2753.472079, 2753.472079, 0.000000, X, Y) && !ellipse(29605.250000, 32691.400000, 1418.216041, 1418.216041, 0.000000, X, Y) && !ellipse(28683.236000, 32498.536000, 1474.296042, 1474.296042, 0.000000, X, Y) && !ellipse(25522.384000, 29631.846000, 2599.584075, 2599.584075, 0.000000, X, Y) && !ellipse(27842.018086, 28950.467504, 1355.853890, 734.349261, 132.666456, X, Y) && !ellipse(28834.558000, 29814.902000, 1312.496038, 1312.496038, 0.000000, X, Y) && !ellipse(28953.972717, 33361.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29396.188000, 33049.608000, 2948.128085, 2948.128085, 0.000000, X, Y) && !ellipse(26482.218000, 29947.130000, 1320.240038, 1320.240038, 0.000000, X, Y) && !ellipse(29161.606000, 30047.264000, 1414.600041, 1414.600041, 0.000000, X, Y) && !ellipse(27813.342926, 29761.951233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.653800, 30384.696000, 1299.792037, 1299.792037, 0.000000, X, Y) && !ellipse(28074.401337, 31269.434387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29566.767000, 30352.640000, 1732.352050, 1732.352050, 0.000000, X, Y) && !ellipse(28359.668000, 30929.109200, 1384.648040, 1384.648040, 0.000000, X, Y) && !ellipse(27226.111511, 29580.347229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26012.981600, 31255.531380, 1288.048037, 613.355218, 90.000000, X, Y) && !ellipse(29607.504000, 30992.230000, 1457.416042, 1457.416042, 0.000000, X, Y) && !ellipse(27018.636902, 30403.262939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.347137, 29371.515900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.552887, 31453.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.784000, 31798.144000, 1489.872043, 1489.872043, 0.000000, X, Y) && !ellipse(29769.630000, 30526.532000, 2829.200081, 2829.200081, 0.000000, X, Y)
[Tue Sep  4 02:08:53 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src16.gif
[Tue Sep  4 02:17:10 2012] Mean detx,y = (3436.81, 2294.13) 
[Tue Sep  4 02:17:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:17:19 2012] grppha failed
[Tue Sep  4 02:17:19 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src16_src.pi.gz
[Tue Sep  4 02:17:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src16_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Flag p found in src. 16 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Flag c found in src. 16 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Source 16 has no response, skipping
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete