[Sun Sep  2 10:33:15 2012] Detection parameters:
  Position = (338.3, 373.7) = 15 3 38.74 -41 42 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 306.2 +/- 22.6
  Background counts = 28.5
  Rate = 0.05 +/- 0.004

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 6.17'
[Sun Sep  2 17:28:01 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:01 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Sun Sep  2 17:28:01 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.865
[Sun Sep  2 17:28:01 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 9.51"
[Sun Sep  2 23:15:33 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src22.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src22.csv
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src22.csv
[Sun Sep  2 23:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:36 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Sep  2 23:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Sep  2 23:15:36 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Sep  2 23:15:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Sep  2 23:15:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:21 2012] Spatial fit model total counts = 2167.580000, observed total counts = 1902.000000
[Mon Sep  3 04:47:21 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 26
[Mon Sep  3 10:59:50 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Mon Sep  3 10:59:50 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.865
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 9.51"
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src19.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src19.csv
[Mon Sep  3 18:15:56 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Sep  3 18:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src19.csv
[Mon Sep  3 18:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Sep  3 18:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon Sep  3 18:15:59 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Sep  3 18:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon Sep  3 18:15:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:25 2012] Warning, spatial fit 19 centroid is now closest to src. 25
[Tue Sep  4 01:00:26 2012] Spatial fit model total counts = 3538.640000, observed total counts = 3504.000000
[Tue Sep  4 01:00:26 2012] Offset between fit and detection position for source 15 = 3.688783 pixels
[Tue Sep  4 01:00:26 2012] Warning, changing simple spatial fit ID from 19 to 72
[Tue Sep  4 01:00:26 2012] 3359.491000 total counts/ 3001.450000 bgd. counts: snr = 6.535325
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 3.688783 pixels
  Position = (340.8, 376.3) = 15 3 37.74 -41 42 46.7
  Extent = 17.7 (13.8-29.2)", rotation angle = 0
  Source counts = 358.0 +/- 58.0
  Background counts = 3001.4
  Rate = 0.05 +/- 0.008
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:53 2012] XMMSAS src. selection expression = ellipse(29605.250000, 32691.400000, 1063.662031, 1063.662031, 0.000000, X, Y)
[Tue Sep  4 02:08:53 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src15_src.reg
[Tue Sep  4 02:08:53 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (280, 315) - (402, 437)
[Tue Sep  4 02:08:53 2012] XMMSAS bgd. selection expression = annulus(29605.250000, 32691.400000, 1772.770051, 3545.540102, X, Y) && !ellipse(25007.256666, 28117.564000, 1167.336034, 1167.336034, 0.000000, X, Y) && !ellipse(27668.615800, 31736.133600, 642.511218, 642.511218, 0.000000, X, Y) && !ellipse(30296.478000, 30840.776000, 2753.472079, 2753.472079, 0.000000, X, Y) && !ellipse(30412.274109, 32893.693695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31700.303162, 33630.453705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26215.278600, 28976.512800, 901.456026, 901.456026, 0.000000, X, Y) && !ellipse(28683.236000, 32498.536000, 1474.296042, 1474.296042, 0.000000, X, Y) && !ellipse(25522.384000, 29631.846000, 2599.584075, 2599.584075, 0.000000, X, Y) && !ellipse(27842.018086, 28950.467504, 1355.853890, 734.349261, 132.666456, X, Y) && !ellipse(26825.376000, 27973.660000, 1201.680035, 1201.680035, 0.000000, X, Y) && !ellipse(28834.558000, 29814.902000, 1312.496038, 1312.496038, 0.000000, X, Y) && !ellipse(28953.972717, 33361.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29396.188000, 33049.608000, 2948.128085, 2948.128085, 0.000000, X, Y) && !ellipse(33302.280000, 34159.749000, 1709.984049, 1709.984049, 0.000000, X, Y) && !ellipse(26482.218000, 29947.130000, 1320.240038, 1320.240038, 0.000000, X, Y) && !ellipse(34271.272000, 34217.938400, 1792.120052, 1792.120052, 0.000000, X, Y) && !ellipse(29161.606000, 30047.264000, 1414.600041, 1414.600041, 0.000000, X, Y) && !ellipse(27813.342926, 29761.951233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.653800, 30384.696000, 1299.792037, 1299.792037, 0.000000, X, Y) && !ellipse(28074.401337, 31269.434387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29566.767000, 30352.640000, 1732.352050, 1732.352050, 0.000000, X, Y) && !ellipse(28359.668000, 30929.109200, 1384.648040, 1384.648040, 0.000000, X, Y) && !ellipse(27226.111511, 29580.347229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.918701, 28491.525024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26012.981600, 31255.531380, 1288.048037, 613.355218, 90.000000, X, Y) && !ellipse(29607.504000, 30992.230000, 1457.416042, 1457.416042, 0.000000, X, Y) && !ellipse(27018.636902, 30403.262939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.347137, 29371.515900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.552887, 31453.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.962830, 32055.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.784000, 31798.144000, 1489.872043, 1489.872043, 0.000000, X, Y) && !ellipse(31288.824066, 31666.799347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.403839, 34008.006836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30174.216217, 33880.979614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33472.545837, 32677.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32091.184540, 34130.892212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.226349, 32658.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.901428, 31009.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32678.965546, 33013.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29769.630000, 30526.532000, 2829.200081, 2829.200081, 0.000000, X, Y)
[Tue Sep  4 02:08:53 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src15.gif
[Tue Sep  4 02:25:05 2012] Mean detx,y = (3713.94, 4410.79) 
[Tue Sep  4 02:25:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:25:21 2012] grppha failed
[Tue Sep  4 02:25:21 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Sep  4 02:25:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Flag p found in src. 15 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Flag c found in src. 15 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Source 15 has no response, skipping
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete