[Sun Sep  2 10:33:17 2012] Detection parameters:
  Position = (268.3, 211.3) = 15 4 5.97 -41 54 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.1 +/- 14.5
  Background counts = 47.3
  Rate = 0.02 +/- 0.004

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 6.69'
[Sun Sep  2 17:28:02 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:02 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Sun Sep  2 17:28:02 2012] source mask rpix=2.2, npix_max = 30, mask sum = 20, frac = 0.663
[Sun Sep  2 17:28:02 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 9.77"
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src67.ximg exists
[Sun Sep  2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src67.csv
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun Sep  2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src67.csv
[Sun Sep  2 23:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun Sep  2 23:15:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun Sep  2 23:15:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun Sep  2 23:15:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:21 2012] Spatial fit model total counts = 1051.140000, observed total counts = 772.000000
[Mon Sep  3 04:47:21 2012] Poor agreement between spatial fit and data for source 127
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 23
[Mon Sep  3 10:59:50 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Mon Sep  3 10:59:50 2012] source mask rpix=2.2, npix_max = 30, mask sum = 20, frac = 0.663
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 9.77"
[Mon Sep  3 18:15:57 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src59.ximg exists
[Mon Sep  3 18:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src59.csv
[Mon Sep  3 18:15:57 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src59_1.ximg exists
[Mon Sep  3 18:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src59.csv
[Mon Sep  3 18:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:16:00 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Mon Sep  3 18:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Mon Sep  3 18:16:00 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Mon Sep  3 18:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Mon Sep  3 18:16:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:26 2012] Warning, spatial fit 59 centroid is now closest to src. 125
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:56 2012] XMMSAS src. selection expression = ellipse(23291.031525, 18334.640091, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 02:08:56 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src127_src.reg
[Tue Sep  4 02:08:56 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (231, 174) - (306, 249)
[Tue Sep  4 02:08:56 2012] XMMSAS bgd. selection expression = annulus(23291.031525, 18334.640091, 1087.500000, 2175.000000, X, Y) && !ellipse(23079.441605, 21860.557550, 1362.608039, 531.552589, 113.960904, X, Y) && !ellipse(22680.573000, 20833.848000, 1396.360040, 1396.360040, 0.000000, X, Y) && !ellipse(22989.274800, 21405.580000, 2064.432059, 2064.432059, 0.000000, X, Y) && !ellipse(22381.718800, 18281.726000, 1620.472047, 1620.472047, 0.000000, X, Y) && !ellipse(23280.873383, 19097.433990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24075.018000, 20530.060400, 1426.464041, 1426.464041, 0.000000, X, Y) && !ellipse(22344.502960, 17786.753555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22378.728943, 19074.973770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22352.010600, 15901.880600, 1241.472036, 1241.472036, 0.000000, X, Y) && !ellipse(22348.883759, 17009.335754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21636.011200, 16150.047800, 952.472027, 952.472027, 0.000000, X, Y) && !ellipse(25190.670000, 20683.388000, 1353.912039, 1353.912039, 0.000000, X, Y) && !ellipse(22919.701782, 16832.193527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21257.478000, 14523.248000, 1806.312052, 1806.312052, 0.000000, X, Y) && !ellipse(21689.051895, 17169.092850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21655.492325, 16551.721542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21570.107910, 15793.779709, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 02:08:56 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src127.gif
[Tue Sep  4 02:48:21 2012] Mean detx,y = (-7596.03, -6456.23) 
[Tue Sep  4 02:48:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:48:32 2012] grppha failed
[Tue Sep  4 02:48:32 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src127_src.pi.gz
[Tue Sep  4 02:48:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src127_bgd.pi.gz
[Tue Sep  4 03:06:01 2012] Not generating rmf since there are only 90 counts
[Tue Sep  4 03:06:01 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src127_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src127_pl.csv not found, spectral fit skipped or did not complete