[Sun Sep  2 10:33:17 2012] Detection parameters:
  Position = (284.7, 244.0) = 15 3 59.57 -41 52 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.0 +/- 15.9
  Background counts = 50.5
  Rate = 0.02 +/- 0.003

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 4.07'
[Sun Sep  2 17:28:02 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:02 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Sun Sep  2 17:28:02 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.836
[Sun Sep  2 17:28:02 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 8.46"
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src83.ximg exists
[Sun Sep  2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src83.csv
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src83_1.ximg exists
[Sun Sep  2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src83.csv
[Sun Sep  2 23:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Sun Sep  2 23:15:38 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Mon Sep  3 04:47:21 2012] Spatial fit model total counts = 1714.290000, observed total counts = 1710.000000
[Mon Sep  3 04:47:21 2012] Offset between fit and detection position for source 118 = 0.734022 pixels
[Mon Sep  3 04:47:21 2012] Warning, changing simple spatial fit ID from 83 to 31
[Mon Sep  3 04:47:21 2012] 1649.411500 total counts/ 1624.820000 bgd. counts: snr = 0.610074
Spatial fit parameters:
  Offset between fit and detection position for source 118 = 0.734022 pixels
  Position = (284.9, 243.3) = 15 3 59.48 -41 52 25.2
  Extent = 3.4 (2.1-6.3)", rotation angle = 0
  Source counts = 24.6 +/- 40.6
  Background counts = 1624.8
  Rate = 0.003 +/- 0.005
  Deleting source due to low Poisson probability