[Sun Sep  2 10:33:17 2012] Detection parameters:
  Position = (302.7, 278.2) = 15 3 52.57 -41 49 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.1 +/- 18.4
  Background counts = 49.4
  Rate = 0.02 +/- 0.003

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 1.50'
[Sun Sep  2 17:28:02 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:02 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Sep  2 17:28:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Sun Sep  2 17:28:02 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 7.18"
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src77.ximg exists
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src77_1.ximg exists
[Sun Sep  2 23:15:35 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src77 appears to have run properly
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Sun Sep  2 23:15:38 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Mon Sep  3 04:47:22 2012] Source 112 is offset by 2.138309 and -4.591388 pixels which is larger than
2 X fitted extent = 0.928276 x 0.928276, not incorporating fit results
[Mon Sep  3 04:47:22 2012] Spatial fit model total counts = 1285.740000, observed total counts = 1285.000000
[Mon Sep  3 04:47:22 2012] Offset between fit and detection position for source 112 = 2.678209 pixels
[Mon Sep  3 04:47:22 2012] 1298.088000 total counts/ 1184.960000 bgd. counts: snr = 3.286384
Spatial fit parameters:
  Offset between fit and detection position for source 112 = 2.678209 pixels
  Position = (300.4, 279.6) = 15 3 53.45 -41 49 47.4
  Extent = 14.3 (14.2-14.4)", rotation angle = 0
  Source counts = 113.1 +/- 36.0
  Background counts = 1185.0
  Rate = 0.02 +/- 0.005
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 109
[Mon Sep  3 04:47:22 2012] Source is confused with source 111
[Mon Sep  3 04:47:22 2012] Source is confused with source 113
[Mon Sep  3 10:59:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 14.30"
[Mon Sep  3 10:59:50 2012] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.854
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 14.30"
[Mon Sep  3 18:15:58 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src69.ximg exists
[Mon Sep  3 18:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src69.csv
[Mon Sep  3 18:15:58 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src69_1.ximg exists
[Mon Sep  3 18:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src69.csv
[Mon Sep  3 18:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:16:01 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Mon Sep  3 18:16:01 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Mon Sep  3 18:16:01 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Tue Sep  4 01:00:26 2012] Source 112 is offset by -0.106485 and -3.086297 pixels which is larger than
2 X fitted extent = 0.794612 x 0.794612, not incorporating fit results
[Tue Sep  4 01:00:26 2012] Spatial fit model total counts = 2035.290000, observed total counts = 2036.000000
[Tue Sep  4 01:00:26 2012] Offset between fit and detection position for source 112 = 0.924038 pixels
[Tue Sep  4 01:00:26 2012] 2043.096500 total counts/ 1958.310000 bgd. counts: snr = 1.915958
Spatial fit parameters:
  Offset between fit and detection position for source 112 = 0.924038 pixels
  Position = (301.3, 279.4) = 15 3 53.11 -41 49 48.5
  Extent = 12.1 (5.8-28.6)", rotation angle = 0
  Source counts = 84.8 +/- 45.2
  Background counts = 1958.3
  Rate = 0.01 +/- 0.006
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:56 2012] XMMSAS src. selection expression = ellipse(26164.235800, 24256.945200, 728.394021, 728.394021, 0.000000, X, Y)
[Tue Sep  4 02:08:56 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src112_src.reg
[Tue Sep  4 02:08:56 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (259, 238) - (343, 321)
[Tue Sep  4 02:08:56 2012] XMMSAS bgd. selection expression = annulus(26164.235800, 24256.945200, 1213.990035, 2427.980070, X, Y) && !ellipse(23227.852000, 22221.610000, 1305.128038, 1305.128038, 0.000000, X, Y) && !ellipse(23079.441605, 21860.557550, 1362.608039, 531.552589, 113.960904, X, Y) && !ellipse(22680.573000, 20833.848000, 1396.360040, 1396.360040, 0.000000, X, Y) && !ellipse(25751.763400, 27000.672000, 697.477620, 697.477620, 0.000000, X, Y) && !ellipse(23598.308685, 23003.244934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22989.274800, 21405.580000, 2064.432059, 2064.432059, 0.000000, X, Y) && !ellipse(24596.215600, 26874.504000, 852.328025, 852.328025, 0.000000, X, Y) && !ellipse(24437.787800, 26554.704000, 1035.768030, 1035.768030, 0.000000, X, Y) && !ellipse(24754.568000, 25464.026000, 1140.648033, 1140.648033, 0.000000, X, Y) && !ellipse(25172.150000, 26060.850000, 1062.224031, 1062.224031, 0.000000, X, Y) && !ellipse(23667.074800, 24114.387400, 1223.672035, 1223.672035, 0.000000, X, Y) && !ellipse(24495.857269, 25015.077454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24243.008000, 24326.032000, 848.168024, 848.168024, 0.000000, X, Y) && !ellipse(23616.242000, 25210.942000, 1155.680033, 1155.680033, 0.000000, X, Y) && !ellipse(26372.464000, 27577.054000, 1292.232037, 1292.232037, 0.000000, X, Y) && !ellipse(24213.816162, 21702.040298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23639.263600, 24592.327340, 845.184024, 845.184024, 0.000000, X, Y) && !ellipse(25715.288330, 25444.350555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26274.320000, 25310.094000, 664.272019, 664.272019, 0.000000, X, Y) && !ellipse(24075.018000, 20530.060400, 1426.464041, 1426.464041, 0.000000, X, Y) && !ellipse(25650.800323, 24844.396240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.133179, 24222.909637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26614.806946, 23790.174377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25190.670000, 20683.388000, 1353.912039, 1353.912039, 0.000000, X, Y) && !ellipse(26059.661560, 23273.834900, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 02:08:56 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src112.gif
[Tue Sep  4 02:51:05 2012] Mean detx,y = (-3027.19, -1713.17) 
[Tue Sep  4 02:51:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:51:16 2012] grppha failed
[Tue Sep  4 02:51:16 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src112_src.pi.gz
[Tue Sep  4 02:51:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src112_bgd.pi.gz
[Tue Sep  4 03:06:02 2012] Not generating rmf since there are only 84 counts
[Tue Sep  4 03:06:02 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src112_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Flag b found in src. 112 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Flag c found in src. 112 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Source 112 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src112_pl.csv not found, spectral fit skipped or did not complete