[Sun Sep  2 10:33:17 2012] Detection parameters:
  Position = (335.1, 346.0) = 15 3 39.97 -41 44 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.4 +/- 22.4
  Background counts = 75.8
  Rate = 0.03 +/- 0.003

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 4.35'
[Sun Sep  2 17:28:02 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:02 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Sun Sep  2 17:28:02 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.814
[Sun Sep  2 17:28:02 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.60"
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src53.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src53.csv
[Sun Sep  2 23:15:34 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Sep  2 23:15:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src53.csv
[Sun Sep  2 23:15:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Sep  2 23:15:37 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Sep  2 23:15:37 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Mon Sep  3 04:47:21 2012] Warning, spatial fit 53 centroid is now closest to src. 97
[Mon Sep  3 04:47:21 2012] Spatial fit model total counts = 1612.810000, observed total counts = 1595.000000
[Mon Sep  3 04:47:21 2012] Offset between fit and detection position for source 100 = 0.670983 pixels
[Mon Sep  3 04:47:21 2012] Warning, changing simple spatial fit ID from 53 to 62
[Mon Sep  3 04:47:21 2012] 1624.674000 total counts/ 1190.110000 bgd. counts: snr = 12.596799
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 0.670983 pixels
  Position = (335.7, 345.9) = 15 3 39.72 -41 44 59.0
  Extent = 17.7 (17.6-35.4)", rotation angle = 0
  Source counts = 434.6 +/- 40.3
  Background counts = 1190.1
  Rate = 0.06 +/- 0.005
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 52
[Mon Sep  3 10:59:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 17.68"
[Mon Sep  3 10:59:50 2012] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.972
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 17.68"
[Mon Sep  3 18:15:57 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src47.ximg exists
[Mon Sep  3 18:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src47.csv
[Mon Sep  3 18:15:57 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src47_1.ximg exists
[Mon Sep  3 18:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src47.csv
[Mon Sep  3 18:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:16:00 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Mon Sep  3 18:16:00 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Mon Sep  3 18:16:00 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Tue Sep  4 01:00:26 2012] Warning, spatial fit 47 centroid is now closest to src. 98
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:55 2012] XMMSAS src. selection expression = ellipse(29161.606000, 30047.264000, 1060.950031, 1060.950031, 0.000000, X, Y)
[Tue Sep  4 02:08:55 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src100_src.reg
[Tue Sep  4 02:08:55 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (275, 285) - (397, 407)
[Tue Sep  4 02:08:55 2012] XMMSAS bgd. selection expression = annulus(29161.606000, 30047.264000, 1768.250051, 3536.500102, X, Y) && !ellipse(25751.763400, 27000.672000, 697.477620, 697.477620, 0.000000, X, Y) && !ellipse(24754.568000, 25464.026000, 1140.648033, 1140.648033, 0.000000, X, Y) && !ellipse(25172.150000, 26060.850000, 1062.224031, 1062.224031, 0.000000, X, Y) && !ellipse(25007.256666, 28117.564000, 1167.336034, 1167.336034, 0.000000, X, Y) && !ellipse(27668.615800, 31736.133600, 642.511218, 642.511218, 0.000000, X, Y) && !ellipse(30296.478000, 30840.776000, 2753.472079, 2753.472079, 0.000000, X, Y) && !ellipse(29605.250000, 32691.400000, 1418.216041, 1418.216041, 0.000000, X, Y) && !ellipse(30412.274109, 32893.693695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31700.303162, 33630.453705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26215.278600, 28976.512800, 901.456026, 901.456026, 0.000000, X, Y) && !ellipse(28683.236000, 32498.536000, 1474.296042, 1474.296042, 0.000000, X, Y) && !ellipse(26372.464000, 27577.054000, 1292.232037, 1292.232037, 0.000000, X, Y) && !ellipse(25522.384000, 29631.846000, 2599.584075, 2599.584075, 0.000000, X, Y) && !ellipse(27842.018086, 28950.467504, 1355.853890, 734.349261, 132.666456, X, Y) && !ellipse(26825.376000, 27973.660000, 1201.680035, 1201.680035, 0.000000, X, Y) && !ellipse(28834.558000, 29814.902000, 1312.496038, 1312.496038, 0.000000, X, Y) && !ellipse(28953.972717, 33361.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29396.188000, 33049.608000, 2948.128085, 2948.128085, 0.000000, X, Y) && !ellipse(33302.280000, 34159.749000, 1709.984049, 1709.984049, 0.000000, X, Y) && !ellipse(26482.218000, 29947.130000, 1320.240038, 1320.240038, 0.000000, X, Y) && !ellipse(34271.272000, 34217.938400, 1792.120052, 1792.120052, 0.000000, X, Y) && !ellipse(27813.342926, 29761.951233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.653800, 30384.696000, 1299.792037, 1299.792037, 0.000000, X, Y) && !ellipse(28074.401337, 31269.434387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29566.767000, 30352.640000, 1732.352050, 1732.352050, 0.000000, X, Y) && !ellipse(28359.668000, 30929.109200, 1384.648040, 1384.648040, 0.000000, X, Y) && !ellipse(27226.111511, 29580.347229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.918701, 28491.525024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26012.981600, 31255.531380, 1288.048037, 613.355218, 90.000000, X, Y) && !ellipse(29607.504000, 30992.230000, 1457.416042, 1457.416042, 0.000000, X, Y) && !ellipse(27018.636902, 30403.262939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.347137, 29371.515900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.552887, 31453.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.962830, 32055.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.784000, 31798.144000, 1489.872043, 1489.872043, 0.000000, X, Y) && !ellipse(31288.824066, 31666.799347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.403839, 34008.006836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30174.216217, 33880.979614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33472.545837, 32677.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32091.184540, 34130.892212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.226349, 32658.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.901428, 31009.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32678.965546, 33013.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29769.630000, 30526.532000, 2829.200081, 2829.200081, 0.000000, X, Y)
[Tue Sep  4 02:08:55 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src100.gif
[Tue Sep  4 02:45:24 2012] Mean detx,y = (1395.88, 3044.85) 
[Tue Sep  4 02:45:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:45:39 2012] grppha failed
[Tue Sep  4 02:45:40 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src100_src.pi.gz
[Tue Sep  4 02:45:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Tue Sep  4 04:30:00 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:00 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src100_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Flag c found in src. 100 procflags, skipping spectral fitting
[Tue Sep  4 04:30:05 2012] Source 100 has no response, skipping
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src100_pl.csv not found, spectral fit skipped or did not complete