[Tue May 29 11:14:46 2012] Detection parameters:
  Position = (288.5, 272.8) = 8 35 25.42 -45 10 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3216.2 +/- 76.0
  Background counts = 239.5
  Rate = 0.07 +/- 0.002

[Tue May 29 11:14:46 2012] Off-axis axis estimate = 2.00'
[Tue May 29 16:35:36 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Tue May 29 16:35:36 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Tue May 29 16:35:36 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.770
[Tue May 29 16:35:36 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.43"
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 29 17:09:59 2012] Fit fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 29 17:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 29 17:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May 29 17:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:10:05 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Tue May 29 17:10:05 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:10:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:10:05 2012] Assessing source extent using major
[Tue May 29 17:10:05 2012] Source does appear to be extended
[Tue May 29 17:10:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 17:32:16 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Tue May 29 17:32:16 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Tue May 29 17:32:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.770
[Tue May 29 17:32:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.43"
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src3.csv
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src3.csv
[Tue May 29 17:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 29 17:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:47:10 2012] Spatial fit model total counts = 15586.400000, observed total counts = 468629.000000
[Tue May 29 17:47:10 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 17:47:10 2012] Spatial fit model total counts = 53807.200000, observed total counts = 34708.000000
[Tue May 29 17:47:10 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 17:47:10 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:47:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:47:10 2012] Assessing source extent using major
[Tue May 29 17:47:10 2012] Source does appear to be extended
[Tue May 29 17:47:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 05:13:39 2012] Counts = 3216.245850, rescaling region sizes by 2.000000
[Wed May 30 05:13:39 2012] XMMSAS src. selection expression = ellipse(25052.290344, 23682.518250, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 30 05:13:39 2012] Writing source region out to fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src4_src.reg
[Wed May 30 05:13:39 2012] Extracting stamp from image fullrun_mos2_xmm0111080201_pi300-10000_cl_sm2.00.img.gz, (214, 198) - (364, 348)
[Wed May 30 05:13:39 2012] XMMSAS bgd. selection expression = annulus(25052.290344, 23682.518250, 4350.000000, 8700.000000, X, Y) && !ellipse(26048.425140, 24243.617800, 3425.184099, 3425.184099, 0.000000, X, Y) && !ellipse(25612.928986, 22924.207367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30936.660980, 18832.020004, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed May 30 05:13:39 2012] Writing fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src4.gif
[Wed May 30 05:22:49 2012] Mean detx,y = (107.98, -204.18) 
[Wed May 30 05:22:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 05:24:25 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 05:24:25 2012] Setting source spectrum file to fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 30 05:24:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 30 05:59:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 05:59:13 2012] rmf not generated due to insufficient counts
[Wed May 30 06:31:21 2012] Updating aperture counts using extracted products
[Wed May 30 06:31:21 2012] Error reading totcts from fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 30 06:31:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 06:31:21 2012] Using photon index=1.80, rate=0.0726, arf fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src4.arf
[Wed May 30 06:31:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 06:31:21 2012] Updating source flux to 7.9e-13
[Wed May 30 06:31:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting