[Tue May 29 11:14:46 2012] Detection parameters:
  Position = (299.8, 279.0) = 8 35 20.80 -45 10 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 267750.9 +/- 620.7
  Background counts = 243.7
  Rate = 5 +/- 0.01

[Tue May 29 11:14:46 2012] Off-axis axis estimate = 1.41'
[Tue May 29 16:35:36 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Tue May 29 16:35:36 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Tue May 29 16:35:36 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.873
[Tue May 29 16:35:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.14"
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 29 17:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 29 17:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 17:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 29 17:09:59 2012] Fit fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 29 17:10:05 2012] Spatial fit model total counts = 417738.000000, observed total counts = 406871.000000
[Tue May 29 17:10:05 2012] Offset between fit and detection position for source 2 = 0.324784 pixels
[Tue May 29 17:10:05 2012] 400918.000000 total counts/ 25600.000000 bgd. counts: snr = 2345.737500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.324784 pixels
  Position = (300.0, 279.2) = 8 35 20.71 -45 10 33.8
  Extent = 14.3 (14.3-28.5)", rotation angle = 0
  Source counts = 375318.0 +/- 633.2
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Tue May 29 17:10:05 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:10:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:10:05 2012] Assessing source extent using major axis lower bound
[Tue May 29 17:10:05 2012] Source does appear to be extended
[Tue May 29 17:10:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 17:32:16 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 17:32:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 17:32:16 2012] Initial guess for spatial extent in simple fitting = 14.27"
[Tue May 29 17:32:16 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.119
[Tue May 29 17:32:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.27"
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src1.csv
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src1.csv
[Tue May 29 17:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 29 17:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:47:10 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Tue May 29 17:47:10 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:47:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:47:10 2012] Assessing source extent using major axis lower bound
[Tue May 29 17:47:10 2012] Source does appear to be extended
[Tue May 29 17:47:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 05:13:39 2012] Counts = 375318.000000, rescaling region sizes by 3.000000
[Wed May 30 05:13:39 2012] XMMSAS src. selection expression = ellipse(26048.425140, 24243.617800, 2568.888074, 2568.888074, 0.000000, X, Y)
[Wed May 30 05:13:39 2012] Writing source region out to fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src2_src.reg
[Wed May 30 05:13:39 2012] Extracting stamp from image fullrun_mos2_xmm0111080201_pi300-10000_cl_sm2.00.img.gz, (152, 132) - (448, 427)
[Wed May 30 05:13:39 2012] XMMSAS bgd. selection expression = annulus(26048.425140, 24243.617800, 12844.440370, 25688.880739, X, Y) && !ellipse(25612.928986, 22924.207367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25052.290344, 23682.518250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30936.660980, 18832.020004, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed May 30 05:13:39 2012] Writing fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src2.gif
[Wed May 30 05:14:12 2012] Mean detx,y = (262.45, -150.82) 
[Wed May 30 05:14:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 05:20:44 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 05:20:44 2012] Setting source spectrum file to fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 05:20:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 30 06:31:21 2012] Updating aperture counts using extracted products
[Wed May 30 06:31:21 2012] Error reading totcts from fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 06:31:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 06:31:21 2012] Using photon index=1.80, rate=6.59, arf fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src2.arf
[Wed May 30 06:31:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 06:31:21 2012] Updating source flux to 6.8e-11
[Wed May 30 06:31:40 2012] Reading fit data from xmm0111080201/analysis//spectral/fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src2_pl.csv
[Wed May 30 06:31:40 2012] Spectral fit parameter nH value = 402026000000.0
[Wed May 30 06:31:40 2012] Spectral fit parameter PhoIndex value = 1.90194
[Wed May 30 06:31:40 2012] Failed to get F(0.3-8.0) from xmm0111080201/analysis//spectral/fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed May 30 06:31:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 06:31:40 2012] Using Nh = 4e+11, photon index=1.90, rate=6.59, arf fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src2.arf
[Wed May 30 06:31:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 06:31:40 2012] Updating source flux to 6.5e-11