[Tue May 29 11:14:46 2012] Detection parameters:
  Position = (295.0, 264.1) = 8 35 22.77 -45 11 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3188.1 +/- 72.6
  Background counts = 256.2
  Rate = 0.07 +/- 0.002

[Tue May 29 11:14:46 2012] Off-axis axis estimate = 2.51'
[Tue May 29 16:35:36 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Tue May 29 16:35:36 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Tue May 29 16:35:36 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.682
[Tue May 29 16:35:36 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.68"
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 29 17:09:59 2012] Fit fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 29 17:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 29 17:09:59 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 29 17:09:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue May 29 17:09:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:10:05 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.705971 pixels away
[Tue May 29 17:10:05 2012] Source 1 is offset by -0.104311 and -1.882651 pixels which is larger than
2 X fitted extent = 0.882910 x 0.882910, not incorporating fit results
[Tue May 29 17:10:05 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:10:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:10:05 2012] Assessing source extent using major
[Tue May 29 17:10:05 2012] Source does appear to be extended
[Tue May 29 17:10:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 17:32:16 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Tue May 29 17:32:16 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Tue May 29 17:32:16 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.682
[Tue May 29 17:32:16 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.68"
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src2.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src2.csv
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src2.csv
[Tue May 29 17:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May 29 17:47:07 2012] fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May 29 17:47:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May 29 17:47:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:47:10 2012] Spatial fit model total counts = 206531.000000, observed total counts = 31861.000000
[Tue May 29 17:47:10 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 17:47:10 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:47:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:47:10 2012] Assessing source extent using major
[Tue May 29 17:47:10 2012] Source does appear to be extended
[Tue May 29 17:47:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 05:13:39 2012] Counts = 3188.066650, rescaling region sizes by 2.000000
[Wed May 30 05:13:39 2012] XMMSAS src. selection expression = ellipse(25612.928986, 22924.207367, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 30 05:13:39 2012] Writing source region out to fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src1_src.reg
[Wed May 30 05:13:39 2012] Extracting stamp from image fullrun_mos2_xmm0111080201_pi300-10000_cl_sm2.00.img.gz, (220, 189) - (370, 339)
[Wed May 30 05:13:39 2012] XMMSAS bgd. selection expression = annulus(25612.928986, 22924.207367, 4350.000000, 8700.000000, X, Y) && !ellipse(26048.425140, 24243.617800, 3425.184099, 3425.184099, 0.000000, X, Y) && !ellipse(25052.290344, 23682.518250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30936.660980, 18832.020004, 1740.000000, 1740.000000, 0.000000, X, Y)
[Wed May 30 05:13:39 2012] Writing fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src1.gif
[Wed May 30 05:21:01 2012] Mean detx,y = (9.56, 134.54) 
[Wed May 30 05:21:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 05:22:28 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 05:22:28 2012] Setting source spectrum file to fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 05:22:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 30 05:29:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 05:29:14 2012] rmf not generated due to insufficient counts
[Wed May 30 06:31:21 2012] Updating aperture counts using extracted products
[Wed May 30 06:31:21 2012] Error reading totcts from fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 30 06:31:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 06:31:21 2012] Using photon index=1.80, rate=0.0735, arf fullrun_mos2_xmm0111080201_pi300-10000_pass1_cl_src1.arf
[Wed May 30 06:31:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 06:31:21 2012] Updating source flux to 8.2e-13
[Wed May 30 06:31:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting