[Tue May 29 11:14:27 2012] Detection parameters:
  Position = (300.0, 278.9) = 8 35 20.71 -45 10 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 250909.8 +/- 571.1
  Background counts = 321.0
  Rate = 4 +/- 0.01

[Tue May 29 11:14:27 2012] Off-axis axis estimate = 1.42'
[Tue May 29 14:36:52 2012] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Tue May 29 14:36:52 2012] Initial guess for spatial extent in simple fitting = 7.14"
[Tue May 29 14:36:52 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.873
[Tue May 29 14:36:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.14"
[Tue May 29 16:35:35 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 29 16:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 16:35:35 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 29 16:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src1.csv
[Tue May 29 16:35:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 16:35:36 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 29 16:35:36 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 29 16:35:36 2012] Fit fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 29 17:10:03 2012] Spatial fit model total counts = 388840.000000, observed total counts = 393483.000000
[Tue May 29 17:10:03 2012] Offset between fit and detection position for source 2 = 0.376988 pixels
[Tue May 29 17:10:03 2012] 388570.000000 total counts/ 25600.000000 bgd. counts: snr = 2268.562500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.376988 pixels
  Position = (300.3, 278.8) = 8 35 20.57 -45 10 35.7
  Extent = 14.3 (14.3-28.5)", rotation angle = 0
  Source counts = 362970.0 +/- 623.4
  Background counts = 25600.0
  Rate = 6 +/- 0.01
[Tue May 29 17:10:03 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:10:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:10:03 2012] Assessing source extent using major axis lower bound
[Tue May 29 17:10:03 2012] Source does appear to be extended
[Tue May 29 17:10:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 17:15:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 29 17:15:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 17:15:21 2012] Initial guess for spatial extent in simple fitting = 14.27"
[Tue May 29 17:15:21 2012] source mask rpix=3.3, npix_max = 57, mask sum = 56, frac = 0.979
[Tue May 29 17:15:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.27"
[Tue May 29 17:32:16 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 29 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src1.csv
[Tue May 29 17:32:16 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 29 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src1.csv
[Tue May 29 17:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:32:16 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 29 17:32:16 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 29 17:32:16 2012] Fit fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 29 17:47:09 2012] Spatial fit model total counts = 474784.000000, observed total counts = 484350.000000
[Tue May 29 17:47:09 2012] Offset between fit and detection position for source 2 = 0.495906 pixels
[Tue May 29 17:47:09 2012] 473394.000000 total counts/ 67600.000000 bgd. counts: snr = 1560.746154
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.495906 pixels
  Position = (299.9, 279.1) = 8 35 20.73 -45 10 34.4
  Extent = 16.5 (16.5-16.6)", rotation angle = 0
  Source counts = 405794.0 +/- 688.0
  Background counts = 67600.0
  Rate = 7 +/- 0.01
[Tue May 29 17:47:10 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:47:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:47:10 2012] Assessing source extent using major axis lower bound
[Tue May 29 17:47:10 2012] Source does appear to be extended
[Tue May 29 17:47:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 01:04:47 2012] Counts = 405794.000000, rescaling region sizes by 3.000000
[Wed May 30 01:04:47 2012] XMMSAS src. selection expression = ellipse(26043.756480, 24230.831480, 2976.566055, 2976.566055, 0.000000, X, Y)
[Wed May 30 01:04:47 2012] Writing source region out to fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src2_src.reg
[Wed May 30 01:04:47 2012] Extracting stamp from image fullrun_mos1_xmm0111080201_pi300-10000_cl_sm2.00.img.gz, (129, 108) - (471, 450)
[Wed May 30 01:04:47 2012] XMMSAS bgd. selection expression = annulus(26043.756480, 24230.831480, 14882.830273, 29765.660547, X, Y) && !ellipse(26561.924072, 22015.562088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27150.687439, 22455.711517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27970.395874, 22138.739517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24517.240875, 21435.837769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23808.286987, 21864.615707, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 01:04:47 2012] Writing fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src2.gif
[Wed May 30 01:05:15 2012] Mean detx,y = (142.10, -423.67) 
[Wed May 30 01:05:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 01:11:28 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 01:11:28 2012] Setting source spectrum file to fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 01:11:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 30 06:31:21 2012] Updating aperture counts using extracted products
[Wed May 30 06:31:21 2012] Error reading totcts from fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 30 06:31:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 06:31:21 2012] Using photon index=1.80, rate=7.12, arf fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src2.arf
[Wed May 30 06:31:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 06:31:21 2012] Updating source flux to 6.1e-11
[Wed May 30 06:31:28 2012] Reading fit data from xmm0111080201/analysis//spectral/fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src2_pl.csv
[Wed May 30 06:31:28 2012] Spectral fit parameter nH value = 3.55947e+12
[Wed May 30 06:31:28 2012] Spectral fit parameter PhoIndex value = 1.82122
[Wed May 30 06:31:28 2012] Failed to get F(0.3-8.0) from xmm0111080201/analysis//spectral/fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed May 30 06:31:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 06:31:28 2012] Using Nh = 3.6e+12, photon index=1.82, rate=7.12, arf fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src2.arf
[Wed May 30 06:31:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 06:31:28 2012] Updating source flux to 6e-11