[Tue May 29 11:14:27 2012] Detection parameters:
  Position = (286.7, 153.5) = 8 35 26.17 -45 19 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.7 +/- 22.6
  Background counts = 196.8
  Rate = 0.004 +/- 0.0007

[Tue May 29 11:14:27 2012] Off-axis axis estimate = 10.54'
[Tue May 29 14:36:52 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Tue May 29 14:36:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 29 14:36:52 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Tue May 29 14:36:52 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.032
[Tue May 29 14:36:52 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 11.70"
[Tue May 29 16:35:35 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src11.ximg exists
[Tue May 29 16:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src11.csv
[Tue May 29 16:35:35 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May 29 16:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src11.csv
[Tue May 29 16:35:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 16:35:36 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May 29 16:35:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue May 29 16:35:36 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May 29 16:35:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Tue May 29 16:35:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:10:03 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.425109 pixels away
[Tue May 29 17:10:03 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.357337 pixels away
[Tue May 29 17:10:03 2012] Source 18 is offset by -0.990986 and -7.812458 pixels which is larger than
2 X fitted extent = 1.363071 x 1.363071, not incorporating fit results
[Tue May 29 17:10:03 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:10:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:10:03 2012] Assessing source extent using major
[Tue May 29 17:10:03 2012] Source does appear to be extended
[Tue May 29 17:10:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 17:10:03 2012] Deleting source due to low Poisson probability 0.8