[Tue May 29 11:14:27 2012] Detection parameters:
  Position = (274.2, 251.9) = 8 35 31.31 -45 12 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 448.2 +/- 38.5
  Background counts = 312.8
  Rate = 0.008 +/- 0.0007

[Tue May 29 11:14:27 2012] Off-axis axis estimate = 3.81'
[Tue May 29 14:36:52 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Tue May 29 14:36:52 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Tue May 29 14:36:52 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.071
[Tue May 29 14:36:52 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.33"
[Tue May 29 16:35:35 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src8.ximg exists
[Tue May 29 16:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src8.csv
[Tue May 29 16:35:35 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue May 29 16:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src8.csv
[Tue May 29 16:35:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 16:35:36 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue May 29 16:35:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May 29 16:35:36 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue May 29 16:35:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Tue May 29 16:35:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:10:03 2012] Source 10 is offset by 1.129338 and -1.487153 pixels which is larger than
2 X fitted extent = 0.957605 x 0.957605, not incorporating fit results
[Tue May 29 17:10:03 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:10:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:10:03 2012] Assessing source extent using major
[Tue May 29 17:10:03 2012] Source does appear to be extended
[Tue May 29 17:10:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 29 17:10:03 2012] Source is confused with source 11
[Tue May 29 17:15:21 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Tue May 29 17:15:21 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Tue May 29 17:15:21 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.071
[Tue May 29 17:15:21 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.33"
[Tue May 29 17:32:16 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src7.ximg exists
[Tue May 29 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src7.csv
[Tue May 29 17:32:16 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue May 29 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src7.csv
[Tue May 29 17:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:32:16 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue May 29 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue May 29 17:32:16 2012] fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue May 29 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src7.csv
[Tue May 29 17:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080201_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 29 17:47:10 2012] Spatial fit model total counts = 5819.340000, observed total counts = 5279.000000
[Tue May 29 17:47:10 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 17:47:10 2012] Spatial fit model total counts = 6015.720000, observed total counts = 5211.000000
[Tue May 29 17:47:10 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 29 17:47:10 2012] Vigneting correction estimate = 1.000000
[Tue May 29 17:47:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 29 17:47:10 2012] Assessing source extent using major
[Tue May 29 17:47:10 2012] Source does appear to be extended
[Tue May 29 17:47:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 01:04:47 2012] XMMSAS src. selection expression = ellipse(23808.286987, 21864.615707, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 30 01:04:47 2012] Writing source region out to fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src10_src.reg
[Wed May 30 01:04:47 2012] Extracting stamp from image fullrun_mos1_xmm0111080201_pi300-10000_cl_sm2.00.img.gz, (237, 214) - (312, 289)
[Wed May 30 01:04:47 2012] XMMSAS bgd. selection expression = annulus(23808.286987, 21864.615707, 1087.500000, 2175.000000, X, Y) && !ellipse(26043.756480, 24230.831480, 3968.754740, 3968.754740, 0.000000, X, Y) && !ellipse(26561.924072, 22015.562088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24517.240875, 21435.837769, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 30 01:04:47 2012] Writing fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src10.gif
[Wed May 30 01:15:43 2012] Mean detx,y = (658.85, 2694.24) 
[Wed May 30 01:15:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 01:15:58 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 01:15:58 2012] Setting source spectrum file to fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed May 30 01:15:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed May 30 05:13:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 30 05:13:00 2012] rmf not generated due to insufficient counts
[Wed May 30 06:31:21 2012] Updating aperture counts using extracted products
[Wed May 30 06:31:21 2012] Error reading totcts from fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed May 30 06:31:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 06:31:21 2012] Using photon index=1.80, rate=0.00832, arf fullrun_mos1_xmm0111080201_pi300-10000_pass1_cl_src10.arf
[Wed May 30 06:31:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 06:31:21 2012] Updating source flux to 8.5e-14
[Wed May 30 06:31:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting