[Mon May 20 07:33:32 2013] Detection parameters:
  Position = (274.2, 313.0) = 8 35 31.27 -45 8 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 494.6 +/- 43.4
  Background counts = 533.0
  Rate = 0.02 +/- 0.002

[Mon May 20 07:33:32 2013] Off-axis axis estimate = 2.05'
[Mon May 20 07:48:02 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Mon May 20 07:48:02 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Mon May 20 07:48:02 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.816
[Mon May 20 07:48:02 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.45"
[Mon May 20 08:47:57 2013] fullrun_pn_xmm0111080101_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 20 08:47:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111080101_pi300-10000_cl_pass0_src1.csv
[Mon May 20 08:47:57 2013] fullrun_pn_xmm0111080101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 20 08:47:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111080101_pi300-10000_cl_pass0_src1.csv
[Mon May 20 08:47:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111080101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111080101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 08:47:57 2013] fullrun_pn_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 20 08:47:57 2013] fullrun_pn_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 20 08:47:57 2013] Fit fullrun_pn_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 20 10:00:30 2013] Spatial fit model total counts = 6446.680000, observed total counts = 5878.000000
[Mon May 20 10:00:30 2013] Offset between fit and detection position for source 1 = 2.137127 pixels
[Mon May 20 10:00:30 2013] 6328.030000 total counts/ 5090.170000 bgd. counts: snr = 17.350236
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.137127 pixels
  Position = (273.0, 314.8) = 8 35 31.76 -45 7 58.8
  Extent = 13.1 (10.1-14.9)", rotation angle = 0
  Source counts = 1237.9 +/- 79.5
  Background counts = 5090.2
  Rate = 0.03 +/- 0.002
[Mon May 20 10:00:30 2013] Vigneting correction estimate = 1.000000
[Mon May 20 10:00:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 10:00:30 2013] Assessing source extent using major axis lower bound
[Mon May 20 10:00:30 2013] Source does appear to be extended
[Mon May 20 10:00:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 10:00:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 10:00:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 20 10:00:39 2013] Initial guess for spatial extent in simple fitting = 13.15"
[Mon May 20 10:00:39 2013] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.927
[Mon May 20 10:00:39 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.15"
[Mon May 20 10:59:54 2013] fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 20 10:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_src1.csv
[Mon May 20 10:59:54 2013] fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 20 10:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_src1.csv
[Mon May 20 10:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 10:59:54 2013] fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 20 10:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 20 10:59:54 2013] fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 20 10:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 20 10:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 12:49:22 2013] Spatial fit model total counts = 11553.100000, observed total counts = 9984.000000
[Mon May 20 12:49:22 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 12:49:22 2013] Vigneting correction estimate = 1.000000
[Mon May 20 12:49:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 12:49:22 2013] Assessing source extent using major axis lower bound
[Mon May 20 12:49:22 2013] Source does appear to be extended
[Mon May 20 12:49:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 12:49:30 2013] Counts = 1237.860000, rescaling region sizes by 2.000000
[Mon May 20 12:49:30 2013] XMMSAS src. selection expression = ellipse(23704.631800, 27336.263600, 1577.460045, 1577.460045, 0.000000, X, Y)
[Mon May 20 12:49:30 2013] Writing source region out to fullrun_pn_xmm0111080101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 20 12:49:30 2013] Extracting stamp from image fullrun_pn_xmm0111080101_pi300-10000_cl_sm2.00.img.gz, (182, 224) - (364, 405)
[Mon May 20 12:49:30 2013] XMMSAS bgd. selection expression = annulus(23704.631800, 27336.263600, 5258.200151, 10516.400303, X, Y) && !ellipse(24565.056000, 26103.414000, 1148.400033, 1148.400033, 0.000000, X, Y) && !ellipse(26045.113200, 24191.768200, 4338.840125, 3442.992099, 51.028300, X, Y)
[Mon May 20 12:49:30 2013] Writing fullrun_pn_xmm0111080101_pi300-10000_pass1_cl_src1.gif
[Mon May 20 12:52:36 2013] Mean detx,y = (-126.36, 3282.95) 
[Mon May 20 12:52:43 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 12:54:14 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 12:54:15 2013] Setting source spectrum file to fullrun_pn_xmm0111080101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 20 12:54:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111080101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 20 16:54:53 2013] Updating aperture counts using extracted products
[Mon May 20 16:54:53 2013] Total counts from fullrun_pn_xmm0111080101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 16550.00
[Mon May 20 16:54:54 2013] Total counts from fullrun_pn_xmm0111080101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 0.00
[Mon May 20 16:54:54 2013] Got source and background scale factors 5096784.000000, 151902.000000
[Mon May 20 16:54:54 2013] User source parameters:
  Position = (273.0, 314.8) = 8 35 31.76 -45 7 58.8
  Extent = 13.1 (10.1-14.9)", rotation angle = 0
  Source aperture counts = 16550.0 +/- 129.6
  Background aperture counts = 0.0
  Rate = 0.4 +/- 0.003

[Mon May 20 16:54:54 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 16:54:54 2013] Using photon index=1.80, rate=0.0327, arf fullrun_pn_xmm0111080101_pi300-10000_pass1_cl_src1.arf
[Mon May 20 16:54:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 16:54:54 2013] Updating source flux to 2.5e-13
[Mon May 20 16:55:07 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Mon May 20 16:55:10 2013] xmm0111080101/analysis//spectral/fullrun_pn_xmm0111080101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete