[Mon May 20 07:34:18 2013] Detection parameters:
  Position = (299.7, 278.9) = 8 35 20.80 -45 10 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179052.1 +/- 509.0
  Background counts = 146.3
  Rate = 5 +/- 0.01

[Mon May 20 07:34:19 2013] Off-axis axis estimate = 1.42'
[Mon May 20 09:32:18 2013] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Mon May 20 09:32:18 2013] Initial guess for spatial extent in simple fitting = 7.14"
[Mon May 20 09:32:18 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.873
[Mon May 20 09:32:18 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.14"
[Mon May 20 10:00:28 2013] fullrun_mos2_xmm0111080101_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 20 10:00:28 2013] fullrun_mos2_xmm0111080101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 20 10:00:28 2013] Fit fullrun_mos2_xmm0111080101_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon May 20 10:00:28 2013] fullrun_mos2_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 20 10:00:28 2013] fullrun_mos2_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 20 10:00:28 2013] Fit fullrun_mos2_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 20 10:00:35 2013] Spatial fit model total counts = 276874.000000, observed total counts = 273645.000000
[Mon May 20 10:00:35 2013] Offset between fit and detection position for source 2 = 0.244525 pixels
[Mon May 20 10:00:35 2013] 267297.000000 total counts/ 25600.000000 bgd. counts: snr = 1510.606250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.244525 pixels
  Position = (299.9, 279.1) = 8 35 20.72 -45 10 34.0
  Extent = 14.3 (14.3-28.5)" x 12.2 (12.1-12.2)", rotation angle = 48 (48-49) degrees
  Source counts = 241697.0 +/- 517.0
  Background counts = 25600.0
  Rate = 6 +/- 0.01
[Mon May 20 10:00:35 2013] Vigneting correction estimate = 1.000000
[Mon May 20 10:00:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 10:00:35 2013] Assessing source extent using major axis lower bound
[Mon May 20 10:00:35 2013] Source does appear to be extended
[Mon May 20 10:00:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Mon May 20 12:33:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 12:33:42 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 20 12:33:42 2013] Initial guess for spatial extent in simple fitting = 13.22"
[Mon May 20 12:33:42 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Mon May 20 12:33:42 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.22"
[Mon May 20 12:49:21 2013] fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 20 12:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_src1.csv
[Mon May 20 12:49:21 2013] fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 20 12:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_src1.csv
[Mon May 20 12:49:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 12:49:21 2013] fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 20 12:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 20 12:49:21 2013] fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 20 12:49:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 20 12:49:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 12:49:25 2013] Spatial fit model total counts = 393824.000000, observed total counts = 314209.000000
[Mon May 20 12:49:25 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 12:49:25 2013] Vigneting correction estimate = 1.000000
[Mon May 20 12:49:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 12:49:25 2013] Assessing source extent using major axis lower bound
[Mon May 20 12:49:25 2013] Source does appear to be extended
[Mon May 20 12:49:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.17
[Mon May 20 15:39:03 2013] Counts = 241697.000000, rescaling region sizes by 3.000000
[Mon May 20 15:39:03 2013] XMMSAS src. selection expression = ellipse(26040.070900, 24233.889200, 2569.122074, 2189.124063, 48.438500, X, Y)
[Mon May 20 15:39:03 2013] Writing source region out to fullrun_mos2_xmm0111080101_pi300-10000_pass1_cl_src2_src.reg
[Mon May 20 15:39:03 2013] Extracting stamp from image fullrun_mos2_xmm0111080101_pi300-10000_cl_sm2.00.img.gz, (152, 131) - (448, 427)
[Mon May 20 15:39:03 2013] XMMSAS bgd. selection expression = annulus(26040.070900, 24233.889200, 12845.610370, 25691.220739, X, Y) && !ellipse(25573.379669, 22996.976410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25073.217285, 23683.288208, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 15:39:03 2013] Writing fullrun_mos2_xmm0111080101_pi300-10000_pass1_cl_src2.gif
[Mon May 20 15:39:27 2013] Mean detx,y = (253.28, -151.98) 
[Mon May 20 15:39:31 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 15:49:41 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 15:49:41 2013] Setting source spectrum file to fullrun_mos2_xmm0111080101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 20 15:49:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111080101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 20 16:54:57 2013] Updating aperture counts using extracted products
[Mon May 20 16:54:57 2013] Total counts from fullrun_mos2_xmm0111080101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 323671.00
[Mon May 20 16:54:57 2013] Total counts from fullrun_mos2_xmm0111080101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 138195.00
[Mon May 20 16:54:57 2013] Got source and background scale factors 3910611.000000, 354418373.000000
[Mon May 20 16:54:57 2013] User source parameters:
  Position = (299.9, 279.1) = 8 35 20.72 -45 10 34.0
  Extent = 14.3 (14.3-28.5)" x 12.2 (12.1-12.2)", rotation angle = 48 (48-49) degrees
  Source aperture counts = 322146.2 +/- 569.9
  Background aperture counts = 1524.8
  Rate = 8 +/- 0.01

[Mon May 20 16:54:58 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 16:54:58 2013] Using photon index=1.80, rate=6.32, arf fullrun_mos2_xmm0111080101_pi300-10000_pass1_cl_src2.arf
[Mon May 20 16:54:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 16:54:58 2013] Updating source flux to 9.9e-11
[Mon May 20 16:55:05 2013] Flag p found in src. 2 procflags, skipping spectral fitting
[Mon May 20 16:55:07 2013] xmm0111080101/analysis//spectral/fullrun_mos2_xmm0111080101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete