[Mon May 20 07:33:57 2013] Detection parameters:
  Position = (327.3, 256.4) = 8 35 9.45 -45 12 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 486.0 +/- 32.8
  Background counts = 214.9
  Rate = 0.02 +/- 0.001

[Mon May 20 07:33:58 2013] Off-axis axis estimate = 3.70'
[Mon May 20 08:47:57 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Mon May 20 08:47:57 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Mon May 20 08:47:57 2013] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.909
[Mon May 20 08:47:57 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.28"
[Mon May 20 09:32:18 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_src5.ximg exists
[Mon May 20 09:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_src5.csv
[Mon May 20 09:32:18 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May 20 09:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_src5.csv
[Mon May 20 09:32:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 09:32:18 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May 20 09:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 20 09:32:18 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May 20 09:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 20 09:32:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 10:00:33 2013] Spatial fit model total counts = 33207.600000, observed total counts = 4641.000000
[Mon May 20 10:00:33 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 20 10:00:33 2013] Vigneting correction estimate = 1.000000
[Mon May 20 10:00:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 10:00:33 2013] Assessing source extent using major
[Mon May 20 10:00:33 2013] Source does appear to be extended
[Mon May 20 10:00:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 10:59:54 2013] Using EEF radius (= 8.28 ")to estimate initial spatial extent for simple fitting
[Mon May 20 10:59:54 2013] Initial guess for spatial extent in simple fitting = 8.28"
[Mon May 20 10:59:54 2013] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.909
[Mon May 20 10:59:54 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.28"
[Mon May 20 12:33:42 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 20 12:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src5.csv
[Mon May 20 12:33:42 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 20 12:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src5.csv
[Mon May 20 12:33:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 12:33:42 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 20 12:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May 20 12:33:42 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 20 12:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May 20 12:33:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 12:49:25 2013] Spatial fit model total counts = 10156.200000, observed total counts = 9903.000000
[Mon May 20 12:49:25 2013] Offset between fit and detection position for source 4 = 5.535716 pixels
[Mon May 20 12:49:25 2013] Warning, changing simple spatial fit ID from 5 to 4
[Mon May 20 12:49:25 2013] 9542.502000 total counts/ 8908.660000 bgd. counts: snr = 6.715445
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 5.535716 pixels
  Position = (321.9, 257.6) = 8 35 11.66 -45 12 7.3
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source counts = 633.8 +/- 97.7
  Background counts = 8908.7
  Rate = 0.02 +/- 0.003
[Mon May 20 12:49:25 2013] Vigneting correction estimate = 1.000000
[Mon May 20 12:49:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 12:49:25 2013] Assessing source extent using major axis lower bound
[Mon May 20 12:49:25 2013] Source does appear to be extended
[Mon May 20 12:49:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 12:49:25 2013] Source is confused with source 5
[Mon May 20 13:34:50 2013] XMMSAS src. selection expression = ellipse(27954.294000, 22366.020000, 953.436027, 953.436027, 0.000000, X, Y)
[Mon May 20 13:34:50 2013] Writing source region out to fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src4_src.reg
[Mon May 20 13:34:50 2013] Extracting stamp from image fullrun_mos1_xmm0111080101_pi300-10000_cl_sm2.00.img.gz, (267, 203) - (377, 312)
[Mon May 20 13:34:50 2013] XMMSAS bgd. selection expression = annulus(27954.294000, 22366.020000, 1589.060046, 3178.120091, X, Y) && !ellipse(26034.027400, 24230.559600, 4169.088120, 3182.088092, 48.553200, X, Y) && !ellipse(26006.452000, 21350.018000, 1385.040040, 1385.040040, 0.000000, X, Y) && !ellipse(27219.700000, 21668.526000, 1283.952037, 1283.952037, 0.000000, X, Y) && !ellipse(27520.814453, 22648.477264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28412.925537, 23412.297333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24489.510000, 22388.050000, 1327.536038, 1327.536038, 0.000000, X, Y) && !ellipse(24398.460000, 21485.784000, 1376.432040, 1376.432040, 0.000000, X, Y) && !ellipse(25535.724000, 20267.462000, 2770.080080, 1905.264055, 116.104000, X, Y)
[Mon May 20 13:34:50 2013] Writing fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src4.gif
[Mon May 20 13:48:38 2013] Mean detx,y = (2497.25, -840.84) 
[Mon May 20 13:48:39 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 13:49:01 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 13:49:02 2013] Setting source spectrum file to fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 20 13:49:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 20 16:54:55 2013] Updating aperture counts using extracted products
[Mon May 20 16:54:55 2013] Total counts from fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 9523.00
[Mon May 20 16:54:55 2013] Total counts from fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 706.00
[Mon May 20 16:54:55 2013] Got source and background scale factors 2454962.000000, 649307.000000
[Mon May 20 16:54:55 2013] User source parameters:
  Position = (321.9, 257.6) = 8 35 11.66 -45 12 7.3
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source aperture counts = 6853.7 +/- 98.6
  Background aperture counts = 2669.3
  Rate = 0.2 +/- 0.003

[Mon May 20 16:54:57 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 16:54:57 2013] Using photon index=1.80, rate=0.0166, arf fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src4.arf
[Mon May 20 16:54:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 16:54:57 2013] Updating source flux to 2.6e-13
[Mon May 20 16:54:58 2013] Flag p found in src. 4 procflags, skipping spectral fitting
[Mon May 20 16:54:58 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Mon May 20 16:55:05 2013] xmm0111080101/analysis//spectral/fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete