[Mon May 20 07:33:58 2013] Detection parameters:
  Position = (277.0, 293.8) = 8 35 30.12 -45 9 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.9 +/- 25.8
  Background counts = 175.0
  Rate = 0.004 +/- 0.0007

[Mon May 20 07:33:58 2013] Off-axis axis estimate = 1.59'
[Mon May 20 08:47:57 2013] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Mon May 20 08:47:57 2013] Initial guess for spatial extent in simple fitting = 7.22"
[Mon May 20 08:47:57 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857
[Mon May 20 08:47:57 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.22"
[Mon May 20 09:32:18 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_src14.ximg exists
[Mon May 20 09:32:18 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon May 20 09:32:18 2013] Fit fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_src14 appears to have run properly
[Mon May 20 09:32:18 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon May 20 09:32:18 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon May 20 09:32:18 2013] Fit fullrun_mos1_xmm0111080101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon May 20 10:00:33 2013] Spatial fit model total counts = 3499.090000, observed total counts = 3502.000000
[Mon May 20 10:00:33 2013] Offset between fit and detection position for source 15 = 8.418706 pixels
[Mon May 20 10:00:33 2013] 3540.063000 total counts/ 3242.190000 bgd. counts: snr = 5.231327
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 8.418706 pixels
  Position = (270.4, 299.1) = 8 35 32.84 -45 9 7.2
  Extent = 14.4 (14.4-28.9)", rotation angle = 0
  Source counts = 297.9 +/- 59.5
  Background counts = 3242.2
  Rate = 0.008 +/- 0.002
[Mon May 20 10:00:33 2013] Vigneting correction estimate = 1.000000
[Mon May 20 10:00:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 10:00:33 2013] Assessing source extent using major axis lower bound
[Mon May 20 10:00:33 2013] Source does appear to be extended
[Mon May 20 10:00:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 10:59:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 20 10:59:54 2013] Initial guess for spatial extent in simple fitting = 14.45"
[Mon May 20 10:59:54 2013] source mask rpix=3.3, npix_max = 58, mask sum = 55, frac = 0.942
[Mon May 20 10:59:54 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 14.45"
[Mon May 20 12:33:42 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src12.ximg exists
[Mon May 20 12:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src12.csv
[Mon May 20 12:33:42 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon May 20 12:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src12.csv
[Mon May 20 12:33:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 12:33:42 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon May 20 12:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 20 12:33:42 2013] fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon May 20 12:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon May 20 12:33:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111080101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 12:49:25 2013] Warning, spatial fit 5 centroid is now closest to src. 5
[Mon May 20 12:49:25 2013] Warning, spatial fit 10 centroid is now closest to src. 1
[Mon May 20 12:49:25 2013] Source 15 is offset by -6.462230 and 5.539218 pixels which is larger than
2 X fitted extent = 1.660460 x 1.660460, not incorporating fit results
[Mon May 20 12:49:25 2013] Vigneting correction estimate = 1.000000
[Mon May 20 12:49:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 12:49:25 2013] Assessing source extent using major axis lower bound
[Mon May 20 12:49:25 2013] Source does appear to be extended
[Mon May 20 12:49:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 13:34:50 2013] XMMSAS src. selection expression = ellipse(23476.632000, 25968.868000, 866.760025, 866.760025, 0.000000, X, Y)
[Mon May 20 13:34:50 2013] Writing source region out to fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src15_src.reg
[Mon May 20 13:34:50 2013] Extracting stamp from image fullrun_mos1_xmm0111080101_pi300-10000_cl_sm2.00.img.gz, (221, 249) - (320, 349)
[Mon May 20 13:34:50 2013] XMMSAS bgd. selection expression = annulus(23476.632000, 25968.868000, 1444.600042, 2889.200083, X, Y) && !ellipse(26034.027400, 24230.559600, 4169.088120, 3182.088092, 48.553200, X, Y) && !ellipse(24489.510000, 22388.050000, 1327.536038, 1327.536038, 0.000000, X, Y)
[Mon May 20 13:34:50 2013] Writing fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src15.gif
[Mon May 20 14:00:00 2013] Mean detx,y = (-2661.04, 520.35) 
[Mon May 20 14:00:01 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 20 14:00:25 2013] Binned source spectrum to 10 counts/bin
[Mon May 20 14:00:27 2013] Setting source spectrum file to fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Mon May 20 14:00:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Mon May 20 16:54:56 2013] Updating aperture counts using extracted products
[Mon May 20 16:54:56 2013] Total counts from fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 2173.00
[Mon May 20 16:54:56 2013] Total counts from fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1688.00
[Mon May 20 16:54:56 2013] Got source and background scale factors 1725088.000000, 1806570.000000
[Mon May 20 16:54:57 2013] User source parameters:
  Position = (270.4, 299.1) = 8 35 32.84 -45 9 7.2
  Extent = 14.4 (14.4-28.9)", rotation angle = 0
  Source aperture counts = 561.1 +/- 47.6
  Background aperture counts = 1611.9
  Rate = 0.01 +/- 0.001

[Mon May 20 16:54:57 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 16:54:57 2013] Using photon index=1.80, rate=0.00779, arf fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src15.arf
[Mon May 20 16:54:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 16:54:57 2013] Updating source flux to 1.3e-13
[Mon May 20 16:54:58 2013] Flag b found in src. 15 procflags, skipping spectral fitting
[Mon May 20 16:55:05 2013] xmm0111080101/analysis//spectral/fullrun_mos1_xmm0111080101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete