[Sat Aug 25 15:10:02 2012] Detection parameters:
  Position = (273.2, 284.0) = 16 57 53.26 35 20 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1008.8 +/- 44.9
  Background counts = 30.6
  Rate = 0.09 +/- 0.004

[Sat Aug 25 15:10:03 2012] Off-axis axis estimate = 2.11'
[Sat Aug 25 15:16:55 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 15:16:55 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Sat Aug 25 15:16:55 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Sat Aug 25 15:16:55 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.48"
[Sat Aug 25 16:03:07 2012] fullrun_mos2_xmm0111061201_pi300-10000_cl_pass0_src2.ximg exists
[Sat Aug 25 16:03:07 2012] fullrun_mos2_xmm0111061201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Aug 25 16:03:07 2012] Fit fullrun_mos2_xmm0111061201_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Aug 25 16:03:07 2012] fullrun_mos2_xmm0111061201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Aug 25 16:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111061201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Aug 25 16:03:07 2012] fullrun_mos2_xmm0111061201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Aug 25 16:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111061201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Aug 25 16:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111061201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111061201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 16:03:13 2012] Source 2 is offset by 2.096613 and -5.325717 pixels which is larger than
2 X fitted extent = 3.693591 x 5.018759, not incorporating fit results
[Sat Aug 25 16:03:13 2012] Source 2 is offset by -3.938654 and 7.760305 pixels which is larger than
2 X fitted extent = 0.937894 x 0.937894, not incorporating fit results
[Sat Aug 25 16:03:13 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 16:03:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 16:03:13 2012] Assessing source extent using major
[Sat Aug 25 16:03:13 2012] Source does appear to be extended
[Sat Aug 25 16:03:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 16:08:41 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 16:08:41 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Sat Aug 25 16:08:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Sat Aug 25 16:08:41 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.48"
[Sat Aug 25 16:45:11 2012] fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Aug 25 16:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_src2.csv
[Sat Aug 25 16:45:11 2012] fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Aug 25 16:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_src2.csv
[Sat Aug 25 16:45:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 16:45:12 2012] fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Aug 25 16:45:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Aug 25 16:45:12 2012] fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Aug 25 16:45:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Aug 25 16:45:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111061201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 16:45:15 2012] Source 2 is offset by 6.936587 and -3.763740 pixels which is larger than
2 X fitted extent = 6.400690 x 6.400690, not incorporating fit results
[Sat Aug 25 16:45:15 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 16:45:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 16:45:15 2012] Assessing source extent using major
[Sat Aug 25 16:45:15 2012] Source does appear to be extended
[Sat Aug 25 16:45:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 16:46:36 2012] Counts = 1008.773865, rescaling region sizes by 2.000000
[Sat Aug 25 16:46:36 2012] XMMSAS src. selection expression = ellipse(23720.047089, 24657.086578, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Aug 25 16:46:36 2012] Writing source region out to fullrun_mos2_xmm0111061201_pi300-10000_pass1_cl_src2_src.reg
[Sat Aug 25 16:46:36 2012] Extracting stamp from image fullrun_mos2_xmm0111061201_pi300-10000_cl_sm2.00.img.gz, (198, 209) - (348, 359)
[Sat Aug 25 16:46:36 2012] XMMSAS bgd. selection expression = annulus(23720.047089, 24657.086578, 4350.000000, 8700.000000, X, Y) && !ellipse(24541.378000, 24420.156200, 2693.616078, 2693.616078, 0.000000, X, Y) && !ellipse(23766.629578, 25795.956085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23809.120667, 23253.335419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21880.895480, 28036.286400, 392.819211, 392.819211, 0.000000, X, Y) && !ellipse(26495.203840, 26875.239400, 437.892379, 437.892379, 0.000000, X, Y) && !ellipse(26647.280609, 24653.778412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22486.274000, 26137.930000, 1076.296031, 1076.296031, 0.000000, X, Y)
[Sat Aug 25 16:46:36 2012] Writing fullrun_mos2_xmm0111061201_pi300-10000_pass1_cl_src2.gif
[Sat Aug 25 16:53:57 2012] Mean detx,y = (-176.04, -70.09) 
[Sat Aug 25 16:53:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 16:56:41 2012] grppha failed
[Sat Aug 25 16:56:41 2012] Setting source spectrum file to fullrun_mos2_xmm0111061201_pi300-10000_pass1_cl_src2_src.pi.gz
[Sat Aug 25 16:56:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111061201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Aug 25 16:57:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Aug 25 16:57:53 2012] rmf not generated due to insufficient counts
[Sat Aug 25 16:58:16 2012] Updating aperture counts using extracted products
[Sat Aug 25 16:58:16 2012] Error reading totcts from fullrun_mos2_xmm0111061201_pi300-10000_pass1_cl_src2_src.pi.gz
[Sat Aug 25 16:58:16 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 16:58:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 16:58:19 2012] xmm0111061201/analysis//spectral/fullrun_mos2_xmm0111061201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete