[Tue Dec 27 22:43:32 2011] Detection parameters:
  Position = (308.7, 306.8) = 16 57 41.72 35 22 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.1 +/- 14.0
  Background counts = 17.1
  Rate = 0.009 +/- 0.001

[Tue Dec 27 22:43:33 2011] Off-axis axis estimate = 0.96'
[Tue Dec 27 23:11:16 2011] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 23:11:16 2011] Initial guess for spatial extent in simple fitting = 6.91"
[Tue Dec 27 23:11:16 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.917
[Tue Dec 27 23:11:16 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 6.91"
[Wed Dec 28 00:38:34 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Dec 28 00:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src5.csv
[Wed Dec 28 00:38:34 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Dec 28 00:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src5.csv
[Wed Dec 28 00:38:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Dec 28 00:38:35 2011] Fit fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Dec 28 00:38:45 2011] Spatial fit model total counts = 169.000000, observed total counts = 169.000000
[Wed Dec 28 00:38:45 2011] Offset between fit and detection position for source 8 = 0.465537 pixels
[Wed Dec 28 00:38:45 2011] 166.523600 total counts/ 95.875600 bgd. counts: snr = 7.215158
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.465537 pixels
  Position = (308.3, 306.9) = 16 57 41.88 35 22 36.3
  Extent = 5.9 (4.5-7.5)", rotation angle = 0
  Source counts = 70.6 +/- 12.9
  Background counts = 95.9
  Rate = 0.007 +/- 0.001
[Wed Dec 28 00:38:45 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 00:38:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 00:38:45 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 00:38:45 2011] Source does appear to be extended
[Wed Dec 28 00:38:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 01:07:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 01:07:54 2011] Initial guess for spatial extent in simple fitting = 5.87"
[Wed Dec 28 01:07:54 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.169
[Wed Dec 28 01:07:54 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 5.87"
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Dec 28 03:01:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src5.csv
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Dec 28 03:01:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src5.csv
[Wed Dec 28 03:01:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Dec 28 03:01:09 2011] Fit fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Dec 28 03:01:19 2011] Warning, spatial fit 5 centroid is now closest to src. 9
[Wed Dec 28 03:01:19 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 03:01:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 03:01:19 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 03:01:19 2011] Source does appear to be extended
[Wed Dec 28 03:01:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 03:06:03 2011] XMMSAS src. selection expression = ellipse(26771.026400, 26648.172000, 352.237810, 352.237810, 0.000000, X, Y)
[Wed Dec 28 03:06:03 2011] Writing source region out to fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src8_src.reg
[Wed Dec 28 03:06:03 2011] Extracting stamp from image fullrun_mos2_xmm0111060101_pi300-10000_cl_sm2.00.img.gz, (288, 287) - (329, 327)
[Wed Dec 28 03:06:03 2011] XMMSAS bgd. selection expression = annulus(26771.026400, 26648.172000, 587.063017, 1174.126034, X, Y) && !ellipse(24846.705460, 24186.584200, 1712.611249, 1712.611249, 0.000000, X, Y) && !ellipse(26740.132294, 24741.763428, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 03:06:03 2011] Writing fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src8.gif
[Wed Dec 28 03:24:03 2011] Mean detx,y = (2110.45, -2247.39) 
[Wed Dec 28 03:24:06 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 03:24:29 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 03:24:30 2011] Setting source spectrum file to fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Dec 28 03:24:30 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Dec 28 03:49:11 2011] Not generating rmf since there are only 70 counts
[Wed Dec 28 03:49:11 2011] rmf not generated due to insufficient counts
[Wed Dec 28 03:49:51 2011] Updating aperture counts using extracted products
[Wed Dec 28 03:49:51 2011] Error reading totcts from fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Dec 28 03:49:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 03:49:52 2011] Using photon index=1.80, rate=0.00716, arf fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src8.arf
[Wed Dec 28 03:49:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 03:49:52 2011] Updating source flux to 8.2e-14
[Wed Dec 28 03:49:55 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting