[Tue Dec 27 22:43:32 2011] Detection parameters:
  Position = (275.9, 279.9) = 16 57 53.38 35 20 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.0 +/- 26.9
  Background counts = 18.7
  Rate = 0.02 +/- 0.002

[Tue Dec 27 22:43:33 2011] Off-axis axis estimate = 2.11'
[Tue Dec 27 23:11:16 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 23:11:16 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Tue Dec 27 23:11:16 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Tue Dec 27 23:11:16 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.48"
[Wed Dec 28 00:38:34 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Dec 28 00:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src2.csv
[Wed Dec 28 00:38:34 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Dec 28 00:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src2.csv
[Wed Dec 28 00:38:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Dec 28 00:38:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Dec 28 00:38:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Dec 28 00:38:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 00:38:45 2011] Source 3 is offset by -6.952590 and 0.201792 pixels which is larger than
2 X fitted extent = 1.910966 x 1.910966, not incorporating fit results
[Wed Dec 28 00:38:45 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 00:38:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 00:38:45 2011] Assessing source extent using major
[Wed Dec 28 00:38:45 2011] Source does appear to be extended
[Wed Dec 28 00:38:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 01:07:54 2011] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 01:07:54 2011] Initial guess for spatial extent in simple fitting = 7.48"
[Wed Dec 28 01:07:54 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.811
[Wed Dec 28 01:07:54 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.48"
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Dec 28 03:01:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src2.csv
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Dec 28 03:01:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src2.csv
[Wed Dec 28 03:01:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Dec 28 03:01:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Dec 28 03:01:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Dec 28 03:01:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 03:01:19 2011] Source 3 is offset by 6.812881 and 5.807144 pixels which is larger than
2 X fitted extent = 0.860340 x 0.860340, not incorporating fit results
[Wed Dec 28 03:01:19 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 03:01:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 03:01:19 2011] Assessing source extent using major
[Wed Dec 28 03:01:19 2011] Source does appear to be extended
[Wed Dec 28 03:01:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 03:06:03 2011] XMMSAS src. selection expression = ellipse(23957.422638, 24304.923492, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 03:06:03 2011] Writing source region out to fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src3_src.reg
[Wed Dec 28 03:06:03 2011] Extracting stamp from image fullrun_mos2_xmm0111060101_pi300-10000_cl_sm2.00.img.gz, (238, 242) - (313, 317)
[Wed Dec 28 03:06:03 2011] XMMSAS bgd. selection expression = annulus(23957.422638, 24304.923492, 1087.500000, 2175.000000, X, Y) && !ellipse(24846.705460, 24186.584200, 1712.611249, 1712.611249, 0.000000, X, Y) && !ellipse(24140.295746, 22824.643768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26740.132294, 24741.763428, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 03:06:03 2011] Writing fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src3.gif
[Wed Dec 28 03:22:14 2011] Mean detx,y = (-589.98, -183.71) 
[Wed Dec 28 03:22:20 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 03:22:46 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 03:22:46 2011] Setting source spectrum file to fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Dec 28 03:22:46 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Dec 28 03:37:07 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 03:37:07 2011] rmf not generated due to insufficient counts
[Wed Dec 28 03:49:51 2011] Updating aperture counts using extracted products
[Wed Dec 28 03:49:51 2011] Error reading totcts from fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Dec 28 03:49:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 03:49:52 2011] Using photon index=1.80, rate=0.0246, arf fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src3.arf
[Wed Dec 28 03:49:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 03:49:52 2011] Updating source flux to 2.4e-13
[Wed Dec 28 03:49:55 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting