[Tue Dec 27 22:43:33 2011] Detection parameters:
  Position = (224.6, 129.6) = 16 58 11.56 35 9 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.0 +/- 10.3
  Background counts = 10.4
  Rate = 0.004 +/- 0.0008

[Tue Dec 27 22:43:33 2011] Off-axis axis estimate = 13.36'
[Tue Dec 27 23:11:16 2011] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 23:11:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 23:11:16 2011] Initial guess for spatial extent in simple fitting = 13.11"
[Tue Dec 27 23:11:16 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.993
[Tue Dec 27 23:11:16 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 13.11"
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src11.ximg exists
[Wed Dec 28 00:38:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src11.csv
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Dec 28 00:38:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src11.csv
[Wed Dec 28 00:38:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Dec 28 00:38:35 2011] Fit fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Dec 28 00:38:45 2011] Spatial fit model total counts = 82.115700, observed total counts = 81.000000
[Wed Dec 28 00:38:45 2011] Offset between fit and detection position for source 13 = 0.592143 pixels
[Wed Dec 28 00:38:45 2011] 83.784500 total counts/ 59.731200 bgd. counts: snr = 3.112247
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.592143 pixels
  Position = (225.2, 129.6) = 16 58 11.35 35 9 44.9
  Extent = 3.8 (3.3-5.2)", rotation angle = 0
  Source counts = 24.1 +/- 9.2
  Background counts = 59.7
  Rate = 0.002 +/- 0.0009
[Wed Dec 28 00:38:45 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 00:38:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 00:38:45 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 00:38:45 2011] Source does appear to be extended
[Wed Dec 28 00:38:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 00:38:45 2011] Deleting source due to low Poisson probability 0.8