[Tue Dec 27 22:43:33 2011] Detection parameters:
  Position = (94.5, 271.9) = 16 58 57.87 35 20 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.8 +/- 8.8
  Background counts = 8.9
  Rate = 0.003 +/- 0.0007

[Tue Dec 27 22:43:33 2011] Off-axis axis estimate = 14.91'
[Tue Dec 27 23:11:16 2011] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 23:11:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 23:11:16 2011] Initial guess for spatial extent in simple fitting = 13.88"
[Tue Dec 27 23:11:16 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.027
[Tue Dec 27 23:11:16 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 13.88"
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src13.ximg exists
[Wed Dec 28 00:38:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src13.csv
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Dec 28 00:38:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src13.csv
[Wed Dec 28 00:38:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Dec 28 00:38:35 2011] Fit fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Dec 28 00:38:45 2011] Spatial fit model total counts = 55.535900, observed total counts = 57.000000
[Wed Dec 28 00:38:45 2011] Offset between fit and detection position for source 10 = 0.344819 pixels
[Wed Dec 28 00:38:45 2011] 57.247100 total counts/ 42.030300 bgd. counts: snr = 2.347157
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.344819 pixels
  Position = (94.7, 271.6) = 16 58 57.80 35 20 1.6
  Extent = 3.5" x 3.5", rotation angle = 0
  Source counts = 15.2 +/- 7.6
  Background counts = 42.0
  Rate = 0.002 +/- 0.0008
[Wed Dec 28 00:38:45 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 00:38:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 00:38:45 2011] Assessing source extent using major
[Wed Dec 28 00:38:45 2011] Source does appear to be extended
[Wed Dec 28 00:38:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 00:38:45 2011] Deleting source due to low Poisson probability 0.7