[Tue Dec 27 22:43:32 2011] Detection parameters:
  Position = (285.9, 278.8) = 16 57 49.84 35 20 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31380.8 +/- 209.5
  Background counts = 18.9
  Rate = 3 +/- 0.02

[Tue Dec 27 22:43:33 2011] Off-axis axis estimate = 1.69'
[Tue Dec 27 23:11:16 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 23:11:16 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Tue Dec 27 23:11:16 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Tue Dec 27 23:11:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Dec 28 00:38:34 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 00:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 00:38:34 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 00:38:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 00:38:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 00:38:35 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 00:38:35 2011] Fit fullrun_mos2_xmm0111060101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 28 00:38:45 2011] Spatial fit model total counts = 28291.100000, observed total counts = 28269.000000
[Wed Dec 28 00:38:45 2011] Offset between fit and detection position for source 1 = 0.246343 pixels
[Wed Dec 28 00:38:45 2011] 28351.100000 total counts/ 5105.000000 bgd. counts: snr = 325.351062
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.246343 pixels
  Position = (285.9, 278.6) = 16 57 49.85 35 20 33.3
  Extent = 8.1 (8.1-8.2)", rotation angle = 0
  Source counts = 23246.1 +/- 168.4
  Background counts = 5105.0
  Rate = 2 +/- 0.02
[Wed Dec 28 00:38:45 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 00:38:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 00:38:45 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 00:38:45 2011] Source does appear to be extended
[Wed Dec 28 00:38:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 01:07:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 01:07:54 2011] Initial guess for spatial extent in simple fitting = 8.15"
[Wed Dec 28 01:07:54 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.110
[Wed Dec 28 01:07:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.15"
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 03:01:09 2011] Fit fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 03:01:09 2011] fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 03:01:09 2011] Fit fullrun_mos2_xmm0111060101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 03:01:19 2011] Spatial fit model total counts = 26503.600000, observed total counts = 28269.000000
[Wed Dec 28 03:01:19 2011] Offset between fit and detection position for source 1 = 0.285538 pixels
[Wed Dec 28 03:01:19 2011] 26504.063000 total counts/ 115.363000 bgd. counts: snr = 2456.884414
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.285538 pixels
  Position = (286.2, 278.6) = 16 57 49.75 35 20 33.2
  Extent = 7.1" x 7.1", rotation angle = 0
  Source counts = 26388.7 +/- 162.8
  Background counts = 115.4
  Rate = 3 +/- 0.02
[Wed Dec 28 03:01:19 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 03:01:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 03:01:19 2011] Assessing source extent using major
[Wed Dec 28 03:01:19 2011] Source does appear to be extended
[Wed Dec 28 03:01:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 03:06:03 2011] Counts = 26388.700000, rescaling region sizes by 3.000000
[Wed Dec 28 03:06:03 2011] XMMSAS src. selection expression = ellipse(24846.705460, 24186.584200, 1284.458437, 1284.458437, 0.000000, X, Y)
[Wed Dec 28 03:06:03 2011] Writing source region out to fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 28 03:06:03 2011] Extracting stamp from image fullrun_mos2_xmm0111060101_pi300-10000_cl_sm2.00.img.gz, (212, 205) - (360, 352)
[Wed Dec 28 03:06:03 2011] XMMSAS bgd. selection expression = annulus(24846.705460, 24186.584200, 6422.292185, 12844.584370, X, Y) && !ellipse(23957.422638, 24304.923492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22173.861000, 27809.169000, 359.520810, 359.520810, 0.000000, X, Y) && !ellipse(34416.822680, 24056.607340, 570.870416, 570.870416, 0.000000, X, Y) && !ellipse(26771.026400, 26648.172000, 469.650414, 469.650414, 0.000000, X, Y) && !ellipse(24140.295746, 22824.643768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26740.132294, 24741.763428, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 03:06:03 2011] Writing fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src1.gif
[Wed Dec 28 03:06:23 2011] Mean detx,y = (-61.35, -31.32) 
[Wed Dec 28 03:06:29 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 03:22:03 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 03:22:04 2011] Setting source spectrum file to fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 28 03:22:04 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Dec 28 03:49:51 2011] Updating aperture counts using extracted products
[Wed Dec 28 03:49:51 2011] Error reading totcts from fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 28 03:49:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 03:49:52 2011] Using photon index=1.80, rate=2.67, arf fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src1.arf
[Wed Dec 28 03:49:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 03:49:52 2011] Updating source flux to 2.6e-11
[Wed Dec 28 03:51:03 2011] Reading fit data from xmm0111060101/analysis//spectral/fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Dec 28 03:51:03 2011] Spectral fit parameter nH value = 2.85859e+12
[Wed Dec 28 03:51:03 2011] Spectral fit parameter PhoIndex value = 0.730653
[Wed Dec 28 03:51:03 2011] Failed to get F(0.3-8.0) from xmm0111060101/analysis//spectral/fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 03:51:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 03:51:03 2011] Using Nh = 2.9e+12, photon index=0.73, rate=2.67, arf fullrun_mos2_xmm0111060101_pi300-10000_pass1_cl_src1.arf
[Wed Dec 28 03:51:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 03:51:03 2011] Updating source flux to 4.5e-11