[Wed Feb 15 07:30:14 2012] Detection parameters:
  Position = (289.5, 331.0) = 6 17 13.59 9 9 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 574.4 +/- 37.3
  Background counts = 125.4
  Rate = 0.04 +/- 0.003

[Wed Feb 15 07:30:15 2012] Off-axis axis estimate = 2.45'
[Wed Feb 15 07:39:19 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 07:39:19 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Wed Feb 15 07:39:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784
[Wed Feb 15 07:39:19 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.65"
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src12.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src12.csv
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src12.csv
[Wed Feb 15 18:04:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Feb 15 18:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Feb 15 18:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed Feb 15 18:04:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:04:36 2012] Spatial fit model total counts = 2740.310000, observed total counts = 4779.000000
[Wed Feb 15 18:04:36 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Feb 15 18:04:36 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 18:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 18:04:36 2012] Assessing source extent using major
[Wed Feb 15 18:04:36 2012] Source does appear to be extended
[Wed Feb 15 18:04:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 18:13:24 2012] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:13:24 2012] Initial guess for spatial extent in simple fitting = 7.65"
[Wed Feb 15 18:13:24 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784
[Wed Feb 15 18:13:24 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.65"
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src12.ximg exists
[Thu Feb 16 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src12.csv
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Feb 16 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src12.csv
[Thu Feb 16 04:13:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Feb 16 04:13:24 2012] Fit fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Feb 16 04:13:32 2012] Spatial fit model total counts = 4770.250000, observed total counts = 4779.000000
[Thu Feb 16 04:13:32 2012] Offset between fit and detection position for source 9 = 8.549105 pixels
[Thu Feb 16 04:13:32 2012] 4575.550000 total counts/ 3112.300000 bgd. counts: snr = 26.228763
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 8.549105 pixels
  Position = (282.7, 336.3) = 6 17 15.56 9 9 37.4
  Extent = 15.3 (15.3-30.6)", rotation angle = 0
  Source counts = 1463.2 +/- 67.6
  Background counts = 3112.3
  Rate = 0.1 +/- 0.005
[Thu Feb 16 04:13:32 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 04:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 04:13:32 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 04:13:32 2012] Source does appear to be extended
[Thu Feb 16 04:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 04:16:06 2012] Counts = 1463.250000, rescaling region sizes by 2.000000
[Thu Feb 16 04:16:06 2012] XMMSAS src. selection expression = ellipse(24549.998000, 29210.766000, 1836.912053, 1836.912053, 0.000000, X, Y)
[Thu Feb 16 04:16:06 2012] Writing source region out to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src9_src.reg
[Thu Feb 16 04:16:06 2012] Extracting stamp from image fullrun_mos2_xmm0111040101_pi300-10000_cl_sm2.00.img.gz, (177, 231) - (388, 442)
[Thu Feb 16 04:16:07 2012] XMMSAS bgd. selection expression = annulus(24549.998000, 29210.766000, 6123.040176, 12246.080352, X, Y) && !ellipse(26963.958400, 27462.456400, 4158.768120, 4158.768120, 0.000000, X, Y) && !ellipse(27025.859000, 27533.071800, 3461.304100, 3461.304100, 0.000000, X, Y) && !ellipse(27274.494000, 27377.952000, 1670.421648, 1670.421648, 0.000000, X, Y) && !ellipse(27793.104000, 27069.778000, 866.792025, 866.792025, 0.000000, X, Y) && !ellipse(27957.102142, 26825.127747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.279724, 27708.171906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.413544, 28147.741211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27932.322754, 26046.187286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27924.960358, 29023.728302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27579.458740, 24584.476837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25029.157074, 27864.842529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.732000, 26812.850000, 3579.576103, 3579.576103, 0.000000, X, Y) && !ellipse(27027.452900, 33533.433600, 1254.096036, 1254.096036, 0.000000, X, Y) && !ellipse(27084.088684, 23890.943359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26983.113247, 32062.570842, 1919.664055, 598.509544, 90.265292, X, Y) && !ellipse(27026.854400, 31920.064000, 1919.664055, 1009.648029, 90.259216, X, Y) && !ellipse(27018.767100, 23466.988000, 880.496025, 880.496025, 0.000000, X, Y) && !ellipse(26990.915780, 32347.631200, 1080.800031, 1080.800031, 0.000000, X, Y) && !ellipse(26983.287800, 21607.323000, 750.575222, 750.575222, 0.000000, X, Y) && !ellipse(26977.269527, 30397.082874, 1341.288039, 316.417268, 92.386718, X, Y) && !ellipse(27748.645172, 25032.085571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26790.684000, 30868.908000, 1318.312038, 1318.312038, 0.000000, X, Y) && !ellipse(27011.631960, 22916.422000, 751.320022, 751.320022, 0.000000, X, Y) && !ellipse(29803.028000, 27005.727660, 1328.944038, 1328.944038, 0.000000, X, Y) && !ellipse(26791.117200, 35830.688000, 1693.744049, 1693.744049, 0.000000, X, Y)
[Thu Feb 16 04:16:07 2012] Writing fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src9.gif
[Thu Feb 16 05:03:29 2012] Mean detx,y = (1979.51, 1130.64) 
[Thu Feb 16 05:03:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 05:07:00 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 05:07:00 2012] Setting source spectrum file to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Feb 16 05:07:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Feb 16 07:21:48 2012] Updating aperture counts using extracted products
[Thu Feb 16 07:21:48 2012] Error reading totcts from fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Feb 16 07:21:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 07:21:49 2012] Using photon index=1.80, rate=0.0976, arf fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src9.arf
[Thu Feb 16 07:21:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 07:21:49 2012] Updating source flux to 1.1e-12
[Thu Feb 16 07:21:51 2012] Flag p found in src. 9 procflags, skipping spectral fitting