[Wed Feb 15 07:30:14 2012] Detection parameters:
  Position = (321.9, 324.1) = 6 17 4.06 9 8 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4140.4 +/- 91.3
  Background counts = 139.5
  Rate = 0.3 +/- 0.007

[Wed Feb 15 07:30:15 2012] Off-axis axis estimate = 2.52'
[Wed Feb 15 07:39:19 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 07:39:19 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed Feb 15 07:39:19 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.583
[Wed Feb 15 07:39:19 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.69"
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src7.csv
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src7.csv
[Wed Feb 15 18:04:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Feb 15 18:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Feb 15 18:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Feb 15 18:04:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:04:36 2012] Warning, spatial fit 7 centroid is now closest to src. 6
[Wed Feb 15 18:04:36 2012] Source 8 is offset by 5.290202 and -3.575848 pixels which is larger than
2 X fitted extent = 1.425131 x 1.425131, not incorporating fit results
[Wed Feb 15 18:04:36 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 18:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 18:04:36 2012] Assessing source extent using major
[Wed Feb 15 18:04:36 2012] Source does appear to be extended
[Wed Feb 15 18:04:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 18:04:36 2012] Source is confused with source 6
[Wed Feb 15 18:13:24 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:13:24 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Wed Feb 15 18:13:24 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.583
[Wed Feb 15 18:13:24 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.69"
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src7.ximg exists
[Thu Feb 16 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src7.csv
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Feb 16 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src7.csv
[Thu Feb 16 04:13:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Feb 16 04:13:24 2012] Fit fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Feb 16 04:13:32 2012] Warning, spatial fit 7 centroid is now closest to src. 6
[Thu Feb 16 04:13:32 2012] Source 8 is offset by 5.192156 and -3.575848 pixels which is larger than
2 X fitted extent = 1.187779 x 1.187779, not incorporating fit results
[Thu Feb 16 04:13:32 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 04:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 04:13:32 2012] Assessing source extent using major
[Thu Feb 16 04:13:32 2012] Source does appear to be extended
[Thu Feb 16 04:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 04:16:06 2012] Counts = 4140.361816, rescaling region sizes by 2.000000
[Thu Feb 16 04:16:06 2012] XMMSAS src. selection expression = ellipse(27955.413544, 28147.741211, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Feb 16 04:16:06 2012] Writing source region out to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src8_src.reg
[Thu Feb 16 04:16:06 2012] Extracting stamp from image fullrun_mos2_xmm0111040101_pi300-10000_cl_sm2.00.img.gz, (247, 249) - (397, 399)
[Thu Feb 16 04:16:06 2012] XMMSAS bgd. selection expression = annulus(27955.413544, 28147.741211, 4350.000000, 8700.000000, X, Y) && !ellipse(26963.958400, 27462.456400, 4158.768120, 4158.768120, 0.000000, X, Y) && !ellipse(27025.859000, 27533.071800, 3461.304100, 3461.304100, 0.000000, X, Y) && !ellipse(27274.494000, 27377.952000, 1670.421648, 1670.421648, 0.000000, X, Y) && !ellipse(27793.104000, 27069.778000, 866.792025, 866.792025, 0.000000, X, Y) && !ellipse(27957.102142, 26825.127747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.279724, 27708.171906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27932.322754, 26046.187286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27924.960358, 29023.728302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27579.458740, 24584.476837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25029.157074, 27864.842529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.732000, 26812.850000, 3579.576103, 3579.576103, 0.000000, X, Y) && !ellipse(24549.998000, 29210.766000, 1224.608035, 1224.608035, 0.000000, X, Y) && !ellipse(27027.452900, 33533.433600, 1254.096036, 1254.096036, 0.000000, X, Y) && !ellipse(27084.088684, 23890.943359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26983.113247, 32062.570842, 1919.664055, 598.509544, 90.265292, X, Y) && !ellipse(27026.854400, 31920.064000, 1919.664055, 1009.648029, 90.259216, X, Y) && !ellipse(27018.767100, 23466.988000, 880.496025, 880.496025, 0.000000, X, Y) && !ellipse(26990.915780, 32347.631200, 1080.800031, 1080.800031, 0.000000, X, Y) && !ellipse(26983.287800, 21607.323000, 750.575222, 750.575222, 0.000000, X, Y) && !ellipse(26977.269527, 30397.082874, 1341.288039, 316.417268, 92.386718, X, Y) && !ellipse(27748.645172, 25032.085571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26790.684000, 30868.908000, 1318.312038, 1318.312038, 0.000000, X, Y) && !ellipse(27011.631960, 22916.422000, 751.320022, 751.320022, 0.000000, X, Y) && !ellipse(29803.028000, 27005.727660, 1328.944038, 1328.944038, 0.000000, X, Y) && !ellipse(26791.117200, 35830.688000, 1693.744049, 1693.744049, 0.000000, X, Y)
[Thu Feb 16 04:16:06 2012] Writing fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src8.gif
[Thu Feb 16 04:43:51 2012] Mean detx,y = (-203.66, 152.12) 
[Thu Feb 16 04:43:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 04:46:27 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 04:46:27 2012] Setting source spectrum file to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Feb 16 04:46:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Feb 16 05:30:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 16 05:30:32 2012] rmf not generated due to insufficient counts
[Thu Feb 16 07:21:48 2012] Updating aperture counts using extracted products
[Thu Feb 16 07:21:48 2012] Error reading totcts from fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Feb 16 07:21:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 07:21:49 2012] Using photon index=1.80, rate=0.305, arf fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src8.arf
[Thu Feb 16 07:21:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 07:21:49 2012] Updating source flux to 3.5e-12
[Thu Feb 16 07:21:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting