[Wed Feb 15 07:30:14 2012] Detection parameters:
  Position = (292.2, 291.2) = 6 17 12.79 9 6 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.4 +/- 27.3
  Background counts = 142.4
  Rate = 0.01 +/- 0.002

[Wed Feb 15 07:30:15 2012] Off-axis axis estimate = 0.69'
[Wed Feb 15 07:39:19 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 07:39:19 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Wed Feb 15 07:39:19 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Wed Feb 15 07:39:19 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 6.78"
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src23.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src23.csv
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src23.csv
[Wed Feb 15 18:04:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Feb 15 18:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Feb 15 18:04:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Wed Feb 15 18:04:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:04:36 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.838512 pixels away
[Wed Feb 15 18:04:36 2012] Spatial fit model total counts = 1954.500000, observed total counts = 1955.000000
[Wed Feb 15 18:04:36 2012] Offset between fit and detection position for source 25 = 1.865088 pixels
[Wed Feb 15 18:04:36 2012] Warning, changing simple spatial fit ID from 23 to 28
[Wed Feb 15 18:04:36 2012] 1995.885500 total counts/ 1902.850000 bgd. counts: snr = 2.132782
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.865088 pixels
  Position = (292.1, 289.3) = 6 17 12.82 9 6 12.9
  Extent = 14.1 (7.0-28.2)" x 3.9 (2.2-13.8)", rotation angle = 106 (90-136) degrees
  Source counts = 93.0 +/- 44.7
  Background counts = 1902.8
  Rate = 0.006 +/- 0.003
[Wed Feb 15 18:04:36 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 18:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 18:04:36 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 18:04:36 2012] Source does appear to be extended
[Wed Feb 15 18:04:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.51
[Wed Feb 15 18:04:36 2012] Deleting source due to low Poisson probability 0.9