[Wed Feb 15 07:30:14 2012] Detection parameters:
  Position = (310.7, 384.0) = 6 17 7.33 9 13 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 260.0 +/- 22.2
  Background counts = 41.7
  Rate = 0.02 +/- 0.002

[Wed Feb 15 07:30:15 2012] Off-axis axis estimate = 6.26'
[Wed Feb 15 07:39:19 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 07:39:19 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Wed Feb 15 07:39:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.030
[Wed Feb 15 07:39:19 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.56"
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src13.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src13.csv
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src13.csv
[Wed Feb 15 18:04:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Feb 15 18:04:28 2012] Fit fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Feb 15 18:04:36 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.366402 pixels away
[Wed Feb 15 18:04:36 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 18:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 18:04:36 2012] Assessing source extent using major
[Wed Feb 15 18:04:36 2012] Source does appear to be extended
[Wed Feb 15 18:04:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 18:13:24 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:13:24 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Wed Feb 15 18:13:24 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.030
[Wed Feb 15 18:13:24 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.56"
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src13.ximg exists
[Thu Feb 16 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src13.csv
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Feb 16 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src13.csv
[Thu Feb 16 04:13:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Feb 16 04:13:24 2012] Fit fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Feb 16 04:13:32 2012] Spatial fit model total counts = 853.035000, observed total counts = 881.000000
[Thu Feb 16 04:13:32 2012] Offset between fit and detection position for source 23 = 2.098522 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.098522 pixels
  Position = (311.2, 386.0) = 6 17 7.19 9 13 13.5
  Extent = 15.7 (14.7-16.7)", rotation angle = 0
  Source counts = 781.5 +/- 28.0
  Background counts = 0.0
  Rate = 0.05 +/- 0.002
[Thu Feb 16 04:13:32 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 04:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 04:13:32 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 04:13:32 2012] Source does appear to be extended
[Thu Feb 16 04:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 04:16:07 2012] XMMSAS src. selection expression = ellipse(27027.452900, 33533.433600, 940.572027, 940.572027, 0.000000, X, Y)
[Thu Feb 16 04:16:07 2012] Writing source region out to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src23_src.reg
[Thu Feb 16 04:16:07 2012] Extracting stamp from image fullrun_mos2_xmm0111040101_pi300-10000_cl_sm2.00.img.gz, (257, 332) - (365, 440)
[Thu Feb 16 04:16:07 2012] XMMSAS bgd. selection expression = annulus(27027.452900, 33533.433600, 1567.620045, 3135.240090, X, Y) && !ellipse(26963.958400, 27462.456400, 4158.768120, 4158.768120, 0.000000, X, Y) && !ellipse(27025.859000, 27533.071800, 3461.304100, 3461.304100, 0.000000, X, Y) && !ellipse(24549.998000, 29210.766000, 1224.608035, 1224.608035, 0.000000, X, Y) && !ellipse(26983.113247, 32062.570842, 1919.664055, 598.509544, 90.265292, X, Y) && !ellipse(27026.854400, 31920.064000, 1919.664055, 1009.648029, 90.259216, X, Y) && !ellipse(26990.915780, 32347.631200, 1080.800031, 1080.800031, 0.000000, X, Y) && !ellipse(26977.269527, 30397.082874, 1341.288039, 316.417268, 92.386718, X, Y) && !ellipse(26790.684000, 30868.908000, 1318.312038, 1318.312038, 0.000000, X, Y) && !ellipse(26791.117200, 35830.688000, 1693.744049, 1693.744049, 0.000000, X, Y)
[Thu Feb 16 04:16:07 2012] Writing fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src23.gif
[Thu Feb 16 05:07:06 2012] Mean detx,y = (123.48, 5801.73) 
[Thu Feb 16 05:07:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 05:07:39 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 05:07:39 2012] Setting source spectrum file to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Feb 16 05:07:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Feb 16 07:21:48 2012] Updating aperture counts using extracted products
[Thu Feb 16 07:21:48 2012] Error reading totcts from fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Feb 16 07:21:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 07:21:49 2012] Using photon index=1.80, rate=0.0521, arf fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src23.arf
[Thu Feb 16 07:21:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 07:21:49 2012] Updating source flux to 9e-13