[Wed Feb 15 07:30:14 2012] Detection parameters:
  Position = (310.8, 373.0) = 6 17 7.32 9 12 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.9 +/- 22.0
  Background counts = 61.7
  Rate = 0.02 +/- 0.002

[Wed Feb 15 07:30:15 2012] Off-axis axis estimate = 5.48'
[Wed Feb 15 07:39:19 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 07:39:19 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Wed Feb 15 07:39:19 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.103
[Wed Feb 15 07:39:19 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.17"
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src18.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src18.csv
[Wed Feb 15 18:04:27 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Feb 15 18:04:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src18.csv
[Wed Feb 15 18:04:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Feb 15 18:04:28 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Feb 15 18:04:28 2012] Fit fullrun_mos2_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Feb 15 18:04:36 2012] Spatial fit model total counts = 1187.000000, observed total counts = 1187.000000
[Wed Feb 15 18:04:36 2012] Offset between fit and detection position for source 14 = 0.621852 pixels
[Wed Feb 15 18:04:36 2012] 831.215000 total counts/ 266.742000 bgd. counts: snr = 34.561889
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.621852 pixels
  Position = (310.8, 372.4) = 6 17 7.32 9 12 14.2
  Extent = 13.5 (12.0-15.5)", rotation angle = 0
  Source counts = 564.5 +/- 28.8
  Background counts = 266.7
  Rate = 0.04 +/- 0.002
[Wed Feb 15 18:04:36 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 18:04:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 18:04:36 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 18:04:36 2012] Source does appear to be extended
[Wed Feb 15 18:04:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 18:04:36 2012] Source is confused with source 15
[Wed Feb 15 18:13:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:13:24 2012] Initial guess for spatial extent in simple fitting = 13.51"
[Wed Feb 15 18:13:24 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.942
[Wed Feb 15 18:13:24 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 13.51"
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src18.ximg exists
[Thu Feb 16 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src18.csv
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Feb 16 04:13:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src18.csv
[Thu Feb 16 04:13:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 04:13:24 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Feb 16 04:13:25 2012] fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Feb 16 04:13:25 2012] Fit fullrun_mos2_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu Feb 16 04:13:32 2012] Warning, spatial fit 18 centroid is now closest to src. 13
[Thu Feb 16 04:13:32 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 04:13:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 04:13:32 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 04:13:32 2012] Source does appear to be extended
[Thu Feb 16 04:13:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 04:16:07 2012] XMMSAS src. selection expression = ellipse(26990.915780, 32347.631200, 810.600023, 810.600023, 0.000000, X, Y)
[Thu Feb 16 04:16:07 2012] Writing source region out to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src14_src.reg
[Thu Feb 16 04:16:07 2012] Extracting stamp from image fullrun_mos2_xmm0111040101_pi300-10000_cl_sm2.00.img.gz, (264, 326) - (357, 419)
[Thu Feb 16 04:16:07 2012] XMMSAS bgd. selection expression = annulus(26990.915780, 32347.631200, 1351.000039, 2702.000078, X, Y) && !ellipse(26963.958400, 27462.456400, 4158.768120, 4158.768120, 0.000000, X, Y) && !ellipse(27025.859000, 27533.071800, 3461.304100, 3461.304100, 0.000000, X, Y) && !ellipse(27924.960358, 29023.728302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28488.732000, 26812.850000, 3579.576103, 3579.576103, 0.000000, X, Y) && !ellipse(24549.998000, 29210.766000, 1224.608035, 1224.608035, 0.000000, X, Y) && !ellipse(27027.452900, 33533.433600, 1254.096036, 1254.096036, 0.000000, X, Y) && !ellipse(26983.113247, 32062.570842, 1919.664055, 598.509544, 90.265292, X, Y) && !ellipse(27026.854400, 31920.064000, 1919.664055, 1009.648029, 90.259216, X, Y) && !ellipse(26977.269527, 30397.082874, 1341.288039, 316.417268, 92.386718, X, Y) && !ellipse(26790.684000, 30868.908000, 1318.312038, 1318.312038, 0.000000, X, Y) && !ellipse(26791.117200, 35830.688000, 1693.744049, 1693.744049, 0.000000, X, Y)
[Thu Feb 16 04:16:07 2012] Writing fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src14.gif
[Thu Feb 16 05:09:53 2012] Mean detx,y = (138.84, 4751.85) 
[Thu Feb 16 05:09:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 05:10:17 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 05:10:17 2012] Setting source spectrum file to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Feb 16 05:10:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Feb 16 07:21:48 2012] Updating aperture counts using extracted products
[Thu Feb 16 07:21:48 2012] Error reading totcts from fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Feb 16 07:21:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 07:21:49 2012] Using photon index=1.80, rate=0.0377, arf fullrun_mos2_xmm0111040101_pi300-10000_pass1_cl_src14.arf
[Thu Feb 16 07:21:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 07:21:49 2012] Updating source flux to 5.8e-13
[Thu Feb 16 07:21:51 2012] Flag c found in src. 14 procflags, skipping spectral fitting