[Wed Feb 15 07:29:48 2012] Detection parameters:
  Position = (310.2, 469.7) = 6 17 7.50 9 19 19.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.4 +/- 10.2
  Background counts = 19.2
  Rate = 0.002 +/- 0.0006

[Wed Feb 15 07:29:48 2012] Off-axis axis estimate = 12.44'
[Wed Feb 15 07:31:18 2012] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 07:31:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 07:31:18 2012] Initial guess for spatial extent in simple fitting = 12.65"
[Wed Feb 15 07:31:18 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.055
[Wed Feb 15 07:31:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.65"
[Wed Feb 15 07:39:19 2012] fullrun_mos1_xmm0111040101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Feb 15 07:39:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111040101_pi300-10000_cl_pass0_src1.csv
[Wed Feb 15 07:39:19 2012] fullrun_mos1_xmm0111040101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Feb 15 07:39:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111040101_pi300-10000_cl_pass0_src1.csv
[Wed Feb 15 07:39:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111040101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111040101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 07:39:19 2012] fullrun_mos1_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 15 07:39:19 2012] fullrun_mos1_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 15 07:39:19 2012] Fit fullrun_mos1_xmm0111040101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 15 18:04:30 2012] Source 1 is offset by 1.686209 and 7.936283 pixels which is larger than
2 X fitted extent = 4.706391 x 4.706391, not incorporating fit results
[Wed Feb 15 18:04:30 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 18:04:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 18:04:30 2012] Assessing source extent using major
[Wed Feb 15 18:04:30 2012] Source does appear to be extended
[Wed Feb 15 18:04:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 18:04:41 2012] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:04:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 18:04:41 2012] Initial guess for spatial extent in simple fitting = 12.65"
[Wed Feb 15 18:04:41 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.055
[Wed Feb 15 18:04:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.65"
[Wed Feb 15 18:13:23 2012] fullrun_mos1_xmm0111040101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Feb 15 18:13:24 2012] fullrun_mos1_xmm0111040101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Feb 15 18:13:24 2012] Fit fullrun_mos1_xmm0111040101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Feb 15 18:13:24 2012] fullrun_mos1_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 15 18:13:24 2012] fullrun_mos1_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 15 18:13:24 2012] Fit fullrun_mos1_xmm0111040101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 16 04:13:27 2012] Spatial fit model total counts = 545.373000, observed total counts = 545.000000
[Thu Feb 16 04:13:27 2012] Offset between fit and detection position for source 1 = 0.797494 pixels
[Thu Feb 16 04:13:27 2012] 543.620300 total counts/ 487.978000 bgd. counts: snr = 2.518865
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.797494 pixels
  Position = (309.5, 470.1) = 6 17 7.70 9 19 19.3
  Extent = 19.3 (15.4-38.6)" x 5.7 (3.2-8.7)", rotation angle = 90 (89-90) degrees
  Source counts = 55.6 +/- 23.3
  Background counts = 488.0
  Rate = 0.003 +/- 0.001
[Thu Feb 16 04:13:27 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 04:13:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 04:13:27 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 04:13:27 2012] Source does appear to be extended
[Thu Feb 16 04:13:27 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.77
[Thu Feb 16 04:13:27 2012] Source is asymmetric
[Thu Feb 16 04:13:37 2012] XMMSAS src. selection expression = ellipse(26878.171176, 40850.188200, 1159.194033, 340.669810, 90.000000, X, Y)
[Thu Feb 16 04:13:37 2012] Writing source region out to fullrun_mos1_xmm0111040101_pi300-10000_pass1_cl_src1_src.reg
[Thu Feb 16 04:13:37 2012] Extracting stamp from image fullrun_mos1_xmm0111040101_pi300-10000_cl_sm2.00.img.gz, (243, 403) - (376, 537)
[Thu Feb 16 04:13:37 2012] XMMSAS bgd. selection expression = annulus(26878.171176, 40850.188200, 1931.990056, 3863.980111, X, Y) && !ellipse(26894.341705, 37600.909302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26893.937340, 42391.511200, 562.753616, 562.753616, 0.000000, X, Y)
[Thu Feb 16 04:13:37 2012] Writing fullrun_mos1_xmm0111040101_pi300-10000_pass1_cl_src1.gif
[Thu Feb 16 04:13:39 2012] Mean detx,y = (13494.51, -286.61) 
[Thu Feb 16 04:13:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 04:13:55 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 04:13:56 2012] Setting source spectrum file to fullrun_mos1_xmm0111040101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 16 04:13:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111040101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Feb 16 04:15:24 2012] Not generating rmf since there are only 55 counts
[Thu Feb 16 04:15:24 2012] rmf not generated due to insufficient counts
[Thu Feb 16 07:21:48 2012] Updating aperture counts using extracted products
[Thu Feb 16 07:21:48 2012] Error reading totcts from fullrun_mos1_xmm0111040101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Feb 16 07:21:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 07:21:48 2012] Using photon index=1.80, rate=0.0034, arf fullrun_mos1_xmm0111040101_pi300-10000_pass1_cl_src1.arf
[Thu Feb 16 07:21:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 07:21:48 2012] Updating source flux to 9.8e-14
[Thu Feb 16 07:21:50 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Thu Feb 16 07:21:50 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 16 07:21:51 2012] xmm0111040101/analysis//spectral/fullrun_mos1_xmm0111040101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete