[Sun Dec 18 00:37:08 2011] Detection parameters:
  Position = (276.9, 284.0) = 9 2 10.75 -40 32 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1270.3 +/- 56.6
  Background counts = 26.9
  Rate = 0.04 +/- 0.002

[Sun Dec 18 00:37:08 2011] Off-axis axis estimate = 1.88'
[Sun Dec 18 02:46:33 2011] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 02:46:33 2011] Initial guess for spatial extent in simple fitting = 7.37"
[Sun Dec 18 02:46:33 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.675
[Sun Dec 18 02:46:33 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.37"
[Sun Dec 18 14:30:13 2011] fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Dec 18 14:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_src5.csv
[Sun Dec 18 14:30:13 2011] fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Dec 18 14:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_src5.csv
[Sun Dec 18 14:30:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 14:30:13 2011] fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Dec 18 14:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Dec 18 14:30:13 2011] fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Dec 18 14:30:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Dec 18 14:30:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 14:30:29 2011] Warning, spatial fit 5 centroid is now closest to src. 4
[Sun Dec 18 14:30:29 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 14:30:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 14:30:29 2011] Assessing source extent using major
[Sun Dec 18 14:30:29 2011] Source does appear to be extended
[Sun Dec 18 14:30:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 14:30:29 2011] Source is confused with source 4
[Sun Dec 18 16:23:46 2011] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 16:23:46 2011] Initial guess for spatial extent in simple fitting = 7.37"
[Sun Dec 18 16:23:46 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.675
[Sun Dec 18 16:23:46 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 7.37"
[Sun Dec 18 18:03:22 2011] fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Dec 18 18:03:22 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_src5.csv
[Sun Dec 18 18:03:22 2011] fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Dec 18 18:03:22 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_src5.csv
[Sun Dec 18 18:03:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 18:03:22 2011] fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Dec 18 18:03:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Dec 18 18:03:22 2011] fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Dec 18 18:03:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Dec 18 18:03:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 18:03:29 2011] Source 10 is offset by 9.787549 and 0.181445 pixels which is larger than
2 X fitted extent = 5.280184 x 11.854253, not incorporating fit results
[Sun Dec 18 18:03:29 2011] Source 10 is offset by -5.957141 and 0.960273 pixels which is larger than
2 X fitted extent = 1.928736 x 1.928736, not incorporating fit results
[Sun Dec 18 18:03:29 2011] Warning, spatial fit 5 centroid is now closest to src. 4
[Sun Dec 18 18:03:29 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 18:03:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 18:03:29 2011] Assessing source extent using major
[Sun Dec 18 18:03:29 2011] Source does appear to be extended
[Sun Dec 18 18:03:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 20:17:52 2011] Counts = 1270.300171, rescaling region sizes by 2.000000
[Sun Dec 18 20:17:52 2011] XMMSAS src. selection expression = ellipse(24044.698761, 24662.603729, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Dec 18 20:17:52 2011] Writing source region out to fullrun_mos2_xmm0111030101_pi300-10000_pass1_cl_src10_src.reg
[Sun Dec 18 20:17:52 2011] Extracting stamp from image fullrun_mos2_xmm0111030101_pi300-10000_cl_sm2.00.img.gz, (202, 209) - (352, 359)
[Sun Dec 18 20:17:52 2011] XMMSAS bgd. selection expression = annulus(24044.698761, 24662.603729, 4350.000000, 8700.000000, X, Y) && !ellipse(24936.327060, 24257.243800, 1855.046453, 1855.046453, 0.000000, X, Y) && !ellipse(21039.526855, 16733.520691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24225.469086, 23579.229645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.316345, 24224.619476, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Dec 18 20:17:52 2011] Writing fullrun_mos2_xmm0111030101_pi300-10000_pass1_cl_src10.gif
[Sun Dec 18 20:31:58 2011] Mean detx,y = (-40.08, -141.80) 
[Sun Dec 18 20:32:01 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 20:34:12 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 20:34:12 2011] Setting source spectrum file to fullrun_mos2_xmm0111030101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Dec 18 20:34:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111030101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Dec 18 21:48:41 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 18 21:48:41 2011] rmf not generated due to insufficient counts
[Sun Dec 18 21:50:16 2011] Updating aperture counts using extracted products
[Sun Dec 18 21:50:16 2011] Error reading totcts from fullrun_mos2_xmm0111030101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Dec 18 21:50:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 21:50:16 2011] Using photon index=1.80, rate=0.0398, arf fullrun_mos2_xmm0111030101_pi300-10000_pass1_cl_src10.arf
[Sun Dec 18 21:50:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 21:50:16 2011] Updating source flux to 5.4e-13
[Sun Dec 18 21:55:32 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting