[Sun Dec 18 00:36:47 2011] Detection parameters:
  Position = (288.8, 279.0) = 9 2 6.23 -40 33 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123475.7 +/- 417.1
  Background counts = 133.3
  Rate = 2 +/- 0.008

[Sun Dec 18 00:36:49 2011] Off-axis axis estimate = 1.57'
[Sun Dec 18 00:39:41 2011] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 00:39:41 2011] Initial guess for spatial extent in simple fitting = 7.21"
[Sun Dec 18 00:39:41 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.858
[Sun Dec 18 00:39:41 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.21"
[Sun Dec 18 02:46:32 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 18 02:46:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 02:46:32 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 18 02:46:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 02:46:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 02:46:33 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 18 02:46:33 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 18 02:46:33 2011] Fit fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 18 14:30:26 2011] Spatial fit model total counts = 223940.000000, observed total counts = 225316.000000
[Sun Dec 18 14:30:26 2011] Offset between fit and detection position for source 3 = 1.561847 pixels
[Sun Dec 18 14:30:26 2011] 224078.000000 total counts/ 25600.000000 bgd. counts: snr = 1240.487500
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.561847 pixels
  Position = (287.2, 279.2) = 9 2 6.82 -40 33 16.2
  Extent = 13.9 (13.8-13.9)", rotation angle = 0
  Source counts = 198478.0 +/- 473.4
  Background counts = 25600.0
  Rate = 4 +/- 0.009
[Sun Dec 18 14:30:26 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 14:30:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 14:30:26 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 14:30:26 2011] Source does appear to be extended
[Sun Dec 18 14:30:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 14:30:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 14:30:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 14:30:36 2011] Initial guess for spatial extent in simple fitting = 13.86"
[Sun Dec 18 14:30:36 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.901
[Sun Dec 18 14:30:36 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 13.86"
[Sun Dec 18 16:23:45 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Dec 18 16:23:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 16:23:45 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Dec 18 16:23:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src3.csv
[Sun Dec 18 16:23:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 16:23:45 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Dec 18 16:23:46 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Dec 18 16:23:46 2011] Fit fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Dec 18 18:03:27 2011] Spatial fit model total counts = 239976.000000, observed total counts = 242093.000000
[Sun Dec 18 18:03:27 2011] Offset between fit and detection position for source 3 = 0.038806 pixels
[Sun Dec 18 18:03:27 2011] 239687.000000 total counts/ 36100.000000 bgd. counts: snr = 1071.510526
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.038806 pixels
  Position = (287.2, 279.3) = 9 2 6.83 -40 33 16.0
  Extent = 14.1 (14.0-14.1)", rotation angle = 0
  Source counts = 203587.0 +/- 489.6
  Background counts = 36100.0
  Rate = 4 +/- 0.009
[Sun Dec 18 18:03:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 18:03:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 18:03:28 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 18:03:28 2011] Source does appear to be extended
[Sun Dec 18 18:03:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 18:03:34 2011] Counts = 203587.000000, rescaling region sizes by 3.000000
[Sun Dec 18 18:03:34 2011] XMMSAS src. selection expression = ellipse(24938.481600, 24247.146000, 2530.044073, 2530.044073, 0.000000, X, Y)
[Sun Dec 18 18:03:34 2011] Writing source region out to fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 18 18:03:34 2011] Extracting stamp from image fullrun_mos1_xmm0111030101_pi300-10000_cl_sm2.00.img.gz, (142, 134) - (433, 425)
[Sun Dec 18 18:03:34 2011] XMMSAS bgd. selection expression = annulus(24938.481600, 24247.146000, 12650.220364, 25300.440728, X, Y) && !ellipse(24812.062000, 22013.326000, 350.885610, 350.885610, 0.000000, X, Y) && !ellipse(21446.172000, 16428.016000, 1202.555834, 1202.555834, 0.000000, X, Y) && !ellipse(25819.980000, 21761.214000, 1272.576037, 1213.032035, 357.981000, X, Y) && !ellipse(23994.120453, 22123.604523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15950.547241, 14041.315674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26157.135651, 22803.684967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30994.295040, 25095.947600, 696.692020, 696.692020, 0.000000, X, Y) && !ellipse(28967.807261, 24807.652024, 1244.048036, 487.565209, 350.967957, X, Y) && !ellipse(27117.897827, 24580.170380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22126.122818, 24319.743866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21850.295807, 23794.985291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18881.112000, 23444.439600, 1497.240043, 1497.240043, 0.000000, X, Y) && !ellipse(26484.283051, 22543.563782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18360.366600, 19977.903600, 595.601617, 420.556012, 23.104826, X, Y) && !ellipse(29984.215380, 31257.881200, 358.713610, 358.713610, 0.000000, X, Y) && !ellipse(26637.902000, 27820.852000, 1088.600031, 1088.600031, 0.000000, X, Y) && !ellipse(26212.730000, 27352.968000, 1158.000033, 1158.000033, 0.000000, X, Y) && !ellipse(23411.260000, 25957.702000, 1214.488035, 1214.488035, 0.000000, X, Y) && !ellipse(22860.506000, 25136.258000, 1273.152037, 1273.152037, 0.000000, X, Y) && !ellipse(28015.502000, 25528.410000, 1141.600033, 1141.600033, 0.000000, X, Y) && !ellipse(29695.934683, 24932.700146, 1279.920037, 438.215340, 348.854621, X, Y) && !ellipse(28591.205600, 24624.928000, 1217.928035, 1217.928035, 0.000000, X, Y) && !ellipse(19451.902000, 23471.080600, 1468.192042, 1468.192042, 0.000000, X, Y) && !ellipse(23172.986400, 16839.667800, 1690.856049, 1690.856049, 359.057000, X, Y)
[Sun Dec 18 18:03:34 2011] Writing fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src3.gif
[Sun Dec 18 18:04:48 2011] Mean detx,y = (101.88, -144.47) 
[Sun Dec 18 18:04:51 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 18:16:01 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 18:16:02 2011] Setting source spectrum file to fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 18:16:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 18 21:50:15 2011] Updating aperture counts using extracted products
[Sun Dec 18 21:50:15 2011] Error reading totcts from fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 21:50:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 21:50:16 2011] Using photon index=1.80, rate=3.69, arf fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src3.arf
[Sun Dec 18 21:50:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 21:50:16 2011] Updating source flux to 3.8e-11