[Sun Dec 18 00:36:49 2011] Detection parameters:
  Position = (302.7, 312.9) = 9 2 0.92 -40 30 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.7 +/- 17.4
  Background counts = 85.5
  Rate = 0.002 +/- 0.0004

[Sun Dec 18 00:36:49 2011] Off-axis axis estimate = 1.09'
[Sun Dec 18 00:39:41 2011] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 00:39:41 2011] Initial guess for spatial extent in simple fitting = 6.97"
[Sun Dec 18 00:39:41 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Sun Dec 18 00:39:41 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 6.97"
[Sun Dec 18 02:46:32 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src26.ximg exists
[Sun Dec 18 02:46:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src26.csv
[Sun Dec 18 02:46:32 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun Dec 18 02:46:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src26.csv
[Sun Dec 18 02:46:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 02:46:33 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun Dec 18 02:46:33 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Dec 18 02:46:33 2011] Fit fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sun Dec 18 14:30:26 2011] Spatial fit model total counts = 1046.600000, observed total counts = 1045.000000
[Sun Dec 18 14:30:26 2011] Offset between fit and detection position for source 26 = 2.261822 pixels
[Sun Dec 18 14:30:26 2011] Warning, changing simple spatial fit ID from 26 to 24
[Sun Dec 18 14:30:26 2011] 1052.558000 total counts/ 876.829000 bgd. counts: snr = 5.934525
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 2.261822 pixels
  Position = (301.9, 315.0) = 9 2 1.24 -40 30 40.7
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 175.7 +/- 32.4
  Background counts = 876.8
  Rate = 0.003 +/- 0.0006
[Sun Dec 18 14:30:26 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 14:30:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 14:30:26 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 14:30:26 2011] Source does appear to be extended
[Sun Dec 18 14:30:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 14:30:26 2011] Source is confused with source 24
[Sun Dec 18 14:30:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 14:30:36 2011] Initial guess for spatial extent in simple fitting = 14.47"
[Sun Dec 18 14:30:36 2011] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.092
[Sun Dec 18 14:30:36 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 14.47"
[Sun Dec 18 16:23:45 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src20.ximg exists
[Sun Dec 18 16:23:45 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Dec 18 16:23:45 2011] Fit fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Dec 18 16:23:46 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Dec 18 16:23:46 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Dec 18 16:23:46 2011] Fit fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Dec 18 18:03:27 2011] Warning, spatial fit 20 centroid is now closest to src. 30
[Sun Dec 18 18:03:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 18:03:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 18:03:28 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 18:03:28 2011] Source does appear to be extended
[Sun Dec 18 18:03:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 18:03:34 2011] XMMSAS src. selection expression = ellipse(26212.730000, 27352.968000, 868.500025, 868.500025, 0.000000, X, Y)
[Sun Dec 18 18:03:34 2011] Writing source region out to fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src26_src.reg
[Sun Dec 18 18:03:34 2011] Extracting stamp from image fullrun_mos1_xmm0111030101_pi300-10000_cl_sm2.00.img.gz, (252, 265) - (352, 365)
[Sun Dec 18 18:03:34 2011] XMMSAS bgd. selection expression = annulus(26212.730000, 27352.968000, 1447.500042, 2895.000083, X, Y) && !ellipse(24938.481600, 24247.146000, 3373.392097, 3373.392097, 0.000000, X, Y) && !ellipse(28967.807261, 24807.652024, 1244.048036, 487.565209, 350.967957, X, Y) && !ellipse(27117.897827, 24580.170380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26637.902000, 27820.852000, 1088.600031, 1088.600031, 0.000000, X, Y) && !ellipse(23411.260000, 25957.702000, 1214.488035, 1214.488035, 0.000000, X, Y) && !ellipse(22860.506000, 25136.258000, 1273.152037, 1273.152037, 0.000000, X, Y) && !ellipse(28015.502000, 25528.410000, 1141.600033, 1141.600033, 0.000000, X, Y) && !ellipse(29695.934683, 24932.700146, 1279.920037, 438.215340, 348.854621, X, Y) && !ellipse(28591.205600, 24624.928000, 1217.928035, 1217.928035, 0.000000, X, Y)
[Sun Dec 18 18:03:34 2011] Writing fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src26.gif
[Sun Dec 18 18:21:56 2011] Mean detx,y = (-2687.16, -1806.90) 
[Sun Dec 18 18:21:57 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 18:22:09 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 18:22:10 2011] Setting source spectrum file to fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Dec 18 18:22:10 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Dec 18 21:50:15 2011] Updating aperture counts using extracted products
[Sun Dec 18 21:50:15 2011] Error reading totcts from fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sun Dec 18 21:50:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 21:50:16 2011] Using photon index=1.80, rate=0.00318, arf fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src26.arf
[Sun Dec 18 21:50:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 21:50:16 2011] Updating source flux to 3.9e-14
[Sun Dec 18 21:50:17 2011] Flag c found in src. 26 procflags, skipping spectral fitting