[Sun Dec 18 00:36:48 2011] Detection parameters:
  Position = (312.3, 283.1) = 9 1 57.26 -40 33 0.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.0 +/- 23.5
  Background counts = 104.9
  Rate = 0.003 +/- 0.0005

[Sun Dec 18 00:36:49 2011] Off-axis axis estimate = 1.50'
[Sun Dec 18 00:39:41 2011] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 00:39:41 2011] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Dec 18 00:39:41 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.865
[Sun Dec 18 00:39:41 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 7.18"
[Sun Dec 18 02:46:32 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Dec 18 02:46:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src11.csv
[Sun Dec 18 02:46:32 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Dec 18 02:46:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src11.csv
[Sun Dec 18 02:46:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 02:46:33 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Dec 18 02:46:33 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Dec 18 02:46:33 2011] Fit fullrun_mos1_xmm0111030101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Dec 18 14:30:26 2011] Source 11 is offset by 6.857239 and 4.440533 pixels which is larger than
2 X fitted extent = 2.333384 x 2.333384, not incorporating fit results
[Sun Dec 18 14:30:26 2011] Source 11 is offset by 2.692228 and -3.843628 pixels which is larger than
2 X fitted extent = 3.180212 x 1.273232, not incorporating fit results
[Sun Dec 18 14:30:26 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 14:30:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 14:30:26 2011] Assessing source extent using major
[Sun Dec 18 14:30:26 2011] Source does appear to be extended
[Sun Dec 18 14:30:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 14:30:36 2011] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 14:30:36 2011] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Dec 18 14:30:36 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.865
[Sun Dec 18 14:30:36 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 7.18"
[Sun Dec 18 16:23:45 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src10.ximg exists
[Sun Dec 18 16:23:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src10.csv
[Sun Dec 18 16:23:45 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Dec 18 16:23:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src10.csv
[Sun Dec 18 16:23:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 16:23:46 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Dec 18 16:23:46 2011] fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Dec 18 16:23:46 2011] Fit fullrun_mos1_xmm0111030101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Dec 18 18:03:27 2011] Source 11 is offset by 6.857239 and 4.446763 pixels which is larger than
2 X fitted extent = 2.373458 x 2.373458, not incorporating fit results
[Sun Dec 18 18:03:28 2011] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 42.286283 pixels away
[Sun Dec 18 18:03:28 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 33.942026 pixels away
[Sun Dec 18 18:03:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 18:03:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 18:03:28 2011] Assessing source extent using major
[Sun Dec 18 18:03:28 2011] Source does appear to be extended
[Sun Dec 18 18:03:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 18:03:34 2011] XMMSAS src. selection expression = ellipse(27117.897827, 24580.170380, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 18 18:03:34 2011] Writing source region out to fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src11_src.reg
[Sun Dec 18 18:03:34 2011] Extracting stamp from image fullrun_mos1_xmm0111030101_pi300-10000_cl_sm2.00.img.gz, (275, 246) - (350, 321)
[Sun Dec 18 18:03:34 2011] XMMSAS bgd. selection expression = annulus(27117.897827, 24580.170380, 1087.500000, 2175.000000, X, Y) && !ellipse(24938.481600, 24247.146000, 3373.392097, 3373.392097, 0.000000, X, Y) && !ellipse(25819.980000, 21761.214000, 1272.576037, 1213.032035, 357.981000, X, Y) && !ellipse(26157.135651, 22803.684967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28967.807261, 24807.652024, 1244.048036, 487.565209, 350.967957, X, Y) && !ellipse(26484.283051, 22543.563782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26637.902000, 27820.852000, 1088.600031, 1088.600031, 0.000000, X, Y) && !ellipse(26212.730000, 27352.968000, 1158.000033, 1158.000033, 0.000000, X, Y) && !ellipse(28015.502000, 25528.410000, 1141.600033, 1141.600033, 0.000000, X, Y) && !ellipse(29695.934683, 24932.700146, 1279.920037, 438.215340, 348.854621, X, Y) && !ellipse(28591.205600, 24624.928000, 1217.928035, 1217.928035, 0.000000, X, Y)
[Sun Dec 18 18:03:34 2011] Writing fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src11.gif
[Sun Dec 18 18:18:43 2011] Mean detx,y = (99.78, -2232.28) 
[Sun Dec 18 18:18:45 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 18:19:02 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 18:19:02 2011] Setting source spectrum file to fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Dec 18 18:19:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Dec 18 19:18:46 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 18 19:18:46 2011] rmf not generated due to insufficient counts
[Sun Dec 18 21:50:15 2011] Updating aperture counts using extracted products
[Sun Dec 18 21:50:15 2011] Error reading totcts from fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Dec 18 21:50:16 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 21:50:16 2011] Using photon index=1.80, rate=0.00285, arf fullrun_mos1_xmm0111030101_pi300-10000_pass1_cl_src11.arf
[Sun Dec 18 21:50:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 21:50:16 2011] Updating source flux to 3.6e-14
[Sun Dec 18 21:50:17 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting