[Fri Sep  7 21:28:42 2012] Detection parameters:
  Position = (503.6, 342.9) = 12 51 19.54 -29 13 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.8 +/- 5.7
  Background counts = 6.7
  Rate = 0.0006 +/- 0.0002

[Fri Sep  7 21:28:42 2012] Off-axis axis estimate = 15.22'
[Fri Sep  7 22:50:13 2012] Using EEF radius (= 14.04 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 22:50:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 22:50:13 2012] Initial guess for spatial extent in simple fitting = 14.04"
[Fri Sep  7 22:50:13 2012] source mask rpix=3.2, npix_max = 55, mask sum = 35, frac = 0.630
[Fri Sep  7 22:50:13 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 14.04"
[Fri Sep  7 23:09:36 2012] fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_src18.ximg exists
[Fri Sep  7 23:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_src18.csv
[Fri Sep  7 23:09:36 2012] fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Sep  7 23:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_src18.csv
[Fri Sep  7 23:09:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 23:09:36 2012] fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Sep  7 23:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Sep  7 23:09:36 2012] fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Sep  7 23:09:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Sep  7 23:09:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111020201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 23:09:45 2012] Source 10 is offset by -9.336842 and -3.305096 pixels which is larger than
2 X fitted extent = 3.359922 x 3.359922, not incorporating fit results
[Fri Sep  7 23:09:45 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 23:09:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 23:09:45 2012] Assessing source extent using major
[Fri Sep  7 23:09:45 2012] Source does appear to be extended
[Fri Sep  7 23:09:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 23:09:45 2012] Deleting source due to low Poisson probability 1.0