[Sun May 20 21:03:17 2012] Detection parameters:
  Position = (301.8, 340.1) = 12 52 26.62 -29 13 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.8 +/- 26.5
  Background counts = 26.1
  Rate = 0.005 +/- 0.0008

[Sun May 20 21:03:19 2012] Off-axis axis estimate = 3.03'
[Sun May 20 21:05:13 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:05:13 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Sun May 20 21:05:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.739
[Sun May 20 21:05:13 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.95"
[Sun May 20 22:53:18 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src5.ximg exists
[Sun May 20 22:53:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src5.csv
[Sun May 20 22:53:18 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun May 20 22:53:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src5.csv
[Sun May 20 22:53:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 22:53:19 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun May 20 22:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May 20 22:53:19 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May 20 22:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May 20 22:53:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 22:53:30 2012] Warning, spatial fit 5 centroid is now closest to src. 4
[Sun May 20 22:53:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 22:53:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 22:53:30 2012] Assessing source extent using major
[Sun May 20 22:53:30 2012] Source does appear to be extended
[Sun May 20 22:53:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 22:53:34 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Sun May 20 22:53:34 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Sun May 20 22:53:34 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.739
[Sun May 20 22:53:34 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.95"
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src5.csv
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src5.csv
[Mon May 21 00:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 21 00:09:12 2012] Fit fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon May 21 00:09:21 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 21.708740 pixels away
[Mon May 21 00:09:21 2012] Source 5 is offset by 7.105148 and 6.440108 pixels which is larger than
2 X fitted extent = 1.268837 x 1.268837, not incorporating fit results
[Mon May 21 00:09:21 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 93.855660 pixels away
[Mon May 21 00:09:21 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 61.626275 pixels away
[Mon May 21 00:09:21 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 55.887341 pixels away
[Mon May 21 00:09:21 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 48.951257 pixels away
[Mon May 21 00:09:21 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:09:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:09:21 2012] Assessing source extent using major
[Mon May 21 00:09:21 2012] Source does appear to be extended
[Mon May 21 00:09:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:09:26 2012] XMMSAS src. selection expression = ellipse(26208.045837, 29543.187439, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 00:09:26 2012] Writing source region out to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src5_src.reg
[Mon May 21 00:09:26 2012] Extracting stamp from image fullrun_mos1_xmm0111020101_pi300-10000_cl_sm2.00.img.gz, (264, 303) - (339, 378)
[Mon May 21 00:09:26 2012] XMMSAS bgd. selection expression = annulus(26208.045837, 29543.187439, 1087.500000, 2175.000000, X, Y) && !ellipse(26832.810056, 27714.667200, 2418.600070, 2418.600070, 0.000000, X, Y) && !ellipse(26840.412750, 29778.261078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27526.926331, 29537.359650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23611.737444, 27046.046392, 1617.024047, 247.761598, 347.158495, X, Y)
[Mon May 21 00:09:26 2012] Writing fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src5.gif
[Mon May 21 00:21:49 2012] Mean detx,y = (1898.21, -239.59) 
[Mon May 21 00:21:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 00:22:06 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 00:22:06 2012] Setting source spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 21 00:22:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon May 21 01:05:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 01:05:02 2012] rmf not generated due to insufficient counts
[Mon May 21 01:47:46 2012] Updating aperture counts using extracted products
[Mon May 21 01:47:46 2012] Error reading totcts from fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon May 21 01:47:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 01:47:47 2012] Using photon index=1.80, rate=0.00542, arf fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src5.arf
[Mon May 21 01:47:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 01:47:47 2012] Updating source flux to 5.8e-14
[Mon May 21 01:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting