[Sun May 20 21:03:19 2012] Detection parameters:
  Position = (361.4, 228.2) = 12 52 6.78 -29 21 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.2 +/- 13.7
  Background counts = 13.7
  Rate = 0.004 +/- 0.0006

[Sun May 20 21:03:19 2012] Off-axis axis estimate = 6.84'
[Sun May 20 21:05:13 2012] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:05:13 2012] Initial guess for spatial extent in simple fitting = 9.85"
[Sun May 20 21:05:13 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.982
[Sun May 20 21:05:13 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 9.85"
[Sun May 20 22:53:19 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src45.ximg exists
[Sun May 20 22:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src45.csv
[Sun May 20 22:53:19 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src45_1.ximg exists
[Sun May 20 22:53:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src45.csv
[Sun May 20 22:53:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 22:53:20 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sun May 20 22:53:20 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sun May 20 22:53:20 2012] Fit fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sun May 20 22:53:30 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 12.539197 pixels away
[Sun May 20 22:53:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 22:53:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 22:53:30 2012] Assessing source extent using major
[Sun May 20 22:53:30 2012] Source does appear to be extended
[Sun May 20 22:53:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 22:53:34 2012] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Sun May 20 22:53:34 2012] Initial guess for spatial extent in simple fitting = 9.85"
[Sun May 20 22:53:34 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.982
[Sun May 20 22:53:34 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 9.85"
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src21.ximg exists
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon May 21 00:09:12 2012] Fit fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src21 appears to have run properly
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon May 21 00:09:12 2012] Fit fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon May 21 00:09:21 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 12.539197 pixels away
[Mon May 21 00:09:21 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:09:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:09:21 2012] Assessing source extent using major
[Mon May 21 00:09:21 2012] Source does appear to be extended
[Mon May 21 00:09:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:09:27 2012] XMMSAS src. selection expression = ellipse(31394.268555, 19801.831848, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 00:09:27 2012] Writing source region out to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src45_src.reg
[Mon May 21 00:09:27 2012] Extracting stamp from image fullrun_mos1_xmm0111020101_pi300-10000_cl_sm2.00.img.gz, (324, 191) - (399, 266)
[Mon May 21 00:09:27 2012] XMMSAS bgd. selection expression = annulus(31394.268555, 19801.831848, 1087.500000, 2175.000000, X, Y) && !ellipse(32024.401600, 21072.740960, 572.596016, 572.596016, 0.000000, X, Y) && !ellipse(29306.750200, 20010.714400, 521.730415, 521.730415, 0.000000, X, Y)
[Mon May 21 00:09:27 2012] Writing fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src45.gif
[Mon May 21 00:30:17 2012] Mean detx,y = (-8468.73, 2812.81) 
[Mon May 21 00:30:19 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 00:30:52 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 00:30:52 2012] Setting source spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon May 21 00:30:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Mon May 21 01:46:53 2012] Not generating rmf since there are only 86 counts
[Mon May 21 01:46:53 2012] rmf not generated due to insufficient counts
[Mon May 21 01:47:46 2012] Updating aperture counts using extracted products
[Mon May 21 01:47:46 2012] Error reading totcts from fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Mon May 21 01:47:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 01:47:47 2012] Using photon index=1.80, rate=0.00374, arf fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src45.arf
[Mon May 21 01:47:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 01:47:47 2012] Updating source flux to 6.4e-14
[Mon May 21 01:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting