[Sun May 20 21:03:17 2012] Detection parameters:
  Position = (309.1, 342.8) = 12 52 24.21 -29 13 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.8 +/- 29.2
  Background counts = 30.4
  Rate = 0.006 +/- 0.0007

[Sun May 20 21:03:19 2012] Off-axis axis estimate = 3.31'
[Sun May 20 21:05:13 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:05:13 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Sun May 20 21:05:13 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.719
[Sun May 20 21:05:13 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.08"
[Sun May 20 22:53:18 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 20 22:53:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src4.csv
[Sun May 20 22:53:18 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 20 22:53:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src4.csv
[Sun May 20 22:53:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 22:53:19 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 20 22:53:19 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 20 22:53:19 2012] Fit fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May 20 22:53:30 2012] Source 4 is offset by 2.777756 and -8.596815 pixels which is larger than
2 X fitted extent = 7.433150 x 7.433150, not incorporating fit results
[Sun May 20 22:53:30 2012] Source 4 is offset by -0.236037 and 9.142104 pixels which is larger than
2 X fitted extent = 1.081297 x 1.081297, not incorporating fit results
[Sun May 20 22:53:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 22:53:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 22:53:30 2012] Assessing source extent using major
[Sun May 20 22:53:30 2012] Source does appear to be extended
[Sun May 20 22:53:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 22:53:34 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Sun May 20 22:53:34 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Sun May 20 22:53:34 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.719
[Sun May 20 22:53:34 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.08"
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src4.csv
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src4.csv
[Mon May 21 00:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 21 00:09:12 2012] Fit fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Mon May 21 00:09:21 2012] Source 4 is offset by 2.692009 and -8.596815 pixels which is larger than
2 X fitted extent = 7.433150 x 7.433150, not incorporating fit results
[Mon May 21 00:09:21 2012] Source 4 is offset by -0.548819 and 9.266495 pixels which is larger than
2 X fitted extent = 3.255756 x 0.968547, not incorporating fit results
[Mon May 21 00:09:21 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:09:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:09:21 2012] Assessing source extent using major
[Mon May 21 00:09:21 2012] Source does appear to be extended
[Mon May 21 00:09:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:09:26 2012] XMMSAS src. selection expression = ellipse(26840.412750, 29778.261078, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 00:09:26 2012] Writing source region out to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src4_src.reg
[Mon May 21 00:09:26 2012] Extracting stamp from image fullrun_mos1_xmm0111020101_pi300-10000_cl_sm2.00.img.gz, (272, 305) - (347, 380)
[Mon May 21 00:09:26 2012] XMMSAS bgd. selection expression = annulus(26840.412750, 29778.261078, 1087.500000, 2175.000000, X, Y) && !ellipse(26832.810056, 27714.667200, 2418.600070, 2418.600070, 0.000000, X, Y) && !ellipse(26208.045837, 29543.187439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27526.926331, 29537.359650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23611.737444, 27046.046392, 1617.024047, 247.761598, 347.158495, X, Y)
[Mon May 21 00:09:26 2012] Writing fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src4.gif
[Mon May 21 00:21:29 2012] Mean detx,y = (2056.80, 283.54) 
[Mon May 21 00:21:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 00:21:41 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 00:21:41 2012] Setting source spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 21 00:21:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon May 21 01:04:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 21 01:04:52 2012] rmf not generated due to insufficient counts
[Mon May 21 01:47:46 2012] Updating aperture counts using extracted products
[Mon May 21 01:47:46 2012] Error reading totcts from fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon May 21 01:47:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 01:47:47 2012] Using photon index=1.80, rate=0.00584, arf fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src4.arf
[Mon May 21 01:47:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 01:47:47 2012] Updating source flux to 6.1e-14
[Mon May 21 01:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting