[Sun May 20 21:03:18 2012] Detection parameters:
  Position = (244.3, 306.0) = 12 52 45.75 -29 15 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.3 +/- 13.7
  Background counts = 15.2
  Rate = 0.003 +/- 0.0004

[Sun May 20 21:03:19 2012] Off-axis axis estimate = 3.97'
[Sun May 20 21:05:13 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:05:13 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Sun May 20 21:05:13 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Sun May 20 21:05:13 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.41"
[Sun May 20 22:53:18 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src35.ximg exists
[Sun May 20 22:53:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src35.csv
[Sun May 20 22:53:18 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src35_1.ximg exists
[Sun May 20 22:53:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src35.csv
[Sun May 20 22:53:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 22:53:20 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sun May 20 22:53:20 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sun May 20 22:53:20 2012] Fit fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Sun May 20 22:53:30 2012] Spatial fit model total counts = 311.942000, observed total counts = 314.000000
[Sun May 20 22:53:30 2012] Offset between fit and detection position for source 35 = 1.838703 pixels
[Sun May 20 22:53:30 2012] 247.042000 total counts/ 123.759000 bgd. counts: snr = 11.081915
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 1.838703 pixels
  Position = (242.5, 305.4) = 12 52 46.33 -29 15 56.5
  Extent = 10.6 (6.4-13.5)", rotation angle = 0
  Source counts = 123.3 +/- 15.7
  Background counts = 123.8
  Rate = 0.003 +/- 0.0004
[Sun May 20 22:53:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 22:53:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 22:53:30 2012] Assessing source extent using major axis lower bound
[Sun May 20 22:53:30 2012] Source does appear to be extended
[Sun May 20 22:53:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 22:53:30 2012] Source is confused with source 33
[Sun May 20 22:53:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 22:53:34 2012] Initial guess for spatial extent in simple fitting = 10.57"
[Sun May 20 22:53:34 2012] source mask rpix=2.4, npix_max = 34, mask sum = 25, frac = 0.728
[Sun May 20 22:53:34 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 10.57"
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src18.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src18.csv
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src18.csv
[Mon May 21 00:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon May 21 00:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 00:09:21 2012] Warning, spatial fit 18 centroid is now closest to src. 5
[Mon May 21 00:09:21 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:09:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:09:21 2012] Assessing source extent using major axis lower bound
[Mon May 21 00:09:21 2012] Source does appear to be extended
[Mon May 21 00:09:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:09:27 2012] XMMSAS src. selection expression = ellipse(21050.565800, 26524.866000, 634.020018, 634.020018, 0.000000, X, Y)
[Mon May 21 00:09:27 2012] Writing source region out to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src35_src.reg
[Mon May 21 00:09:27 2012] Extracting stamp from image fullrun_mos1_xmm0111020101_pi300-10000_cl_sm2.00.img.gz, (206, 269) - (279, 342)
[Mon May 21 00:09:27 2012] XMMSAS bgd. selection expression = annulus(21050.565800, 26524.866000, 1056.700030, 2113.400061, X, Y) && !ellipse(23611.737444, 27046.046392, 1617.024047, 247.761598, 347.158495, X, Y) && !ellipse(21358.743800, 26616.210200, 1617.024047, 360.682410, 347.742000, X, Y) && !ellipse(22158.173200, 26767.157400, 1277.160037, 276.098408, 168.969000, X, Y)
[Mon May 21 00:09:27 2012] Writing fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src35.gif
[Mon May 21 00:28:33 2012] Mean detx,y = (154.60, -5953.46) 
[Mon May 21 00:28:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 00:29:14 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 00:29:15 2012] Setting source spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon May 21 00:29:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Mon May 21 01:47:46 2012] Updating aperture counts using extracted products
[Mon May 21 01:47:46 2012] Error reading totcts from fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Mon May 21 01:47:47 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 01:47:47 2012] Using photon index=1.80, rate=0.00283, arf fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src35.arf
[Mon May 21 01:47:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 01:47:47 2012] Updating source flux to 3.7e-14
[Mon May 21 01:47:48 2012] Flag c found in src. 35 procflags, skipping spectral fitting