[Sun May 20 21:03:17 2012] Detection parameters:
  Position = (331.4, 275.0) = 12 52 16.79 -29 18 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 537.1 +/- 29.2
  Background counts = 30.8
  Rate = 0.01 +/- 0.0008

[Sun May 20 21:03:19 2012] Off-axis axis estimate = 2.93'
[Sun May 20 21:05:13 2012] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Sun May 20 21:05:13 2012] Initial guess for spatial extent in simple fitting = 7.89"
[Sun May 20 21:05:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.933
[Sun May 20 21:05:13 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.89"
[Sun May 20 22:53:18 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 20 22:53:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 22:53:18 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 20 22:53:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src1.csv
[Sun May 20 22:53:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 22:53:19 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 20 22:53:19 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 20 22:53:19 2012] Fit fullrun_mos1_xmm0111020101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 20 22:53:30 2012] Spatial fit model total counts = 890.690000, observed total counts = 898.000000
[Sun May 20 22:53:30 2012] Offset between fit and detection position for source 1 = 0.051292 pixels
[Sun May 20 22:53:30 2012] 891.561000 total counts/ 548.198000 bgd. counts: snr = 14.665091
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.051292 pixels
  Position = (331.4, 275.0) = 12 52 16.78 -29 18 9.1
  Extent = 4.9 (4.4-5.4)", rotation angle = 0
  Source counts = 343.4 +/- 29.9
  Background counts = 548.2
  Rate = 0.008 +/- 0.0007
[Sun May 20 22:53:30 2012] Vigneting correction estimate = 1.000000
[Sun May 20 22:53:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 22:53:30 2012] Assessing source extent using major axis lower bound
[Sun May 20 22:53:30 2012] Source does appear to be extended
[Sun May 20 22:53:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 22:53:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 22:53:34 2012] Initial guess for spatial extent in simple fitting = 4.94"
[Sun May 20 22:53:34 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.121
[Sun May 20 22:53:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.94"
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src1.csv
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 21 00:09:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src1.csv
[Mon May 21 00:09:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 21 00:09:12 2012] fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 21 00:09:12 2012] Fit fullrun_mos1_xmm0111020101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 21 00:09:21 2012] Spatial fit model total counts = 897.373000, observed total counts = 898.000000
[Mon May 21 00:09:21 2012] Offset between fit and detection position for source 1 = 0.006805 pixels
[Mon May 21 00:09:21 2012] 898.665000 total counts/ 555.974000 bgd. counts: snr = 14.533675
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006805 pixels
  Position = (331.4, 274.9) = 12 52 16.78 -29 18 9.1
  Extent = 4.8 (4.3-5.3)", rotation angle = 0
  Source counts = 342.7 +/- 30.0
  Background counts = 556.0
  Rate = 0.008 +/- 0.0007
[Mon May 21 00:09:21 2012] Vigneting correction estimate = 1.000000
[Mon May 21 00:09:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 00:09:21 2012] Assessing source extent using major axis lower bound
[Mon May 21 00:09:21 2012] Source does appear to be extended
[Mon May 21 00:09:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 00:09:26 2012] XMMSAS src. selection expression = ellipse(28781.801000, 23872.141200, 290.504408, 290.504408, 0.000000, X, Y)
[Mon May 21 00:09:26 2012] Writing source region out to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 21 00:09:26 2012] Extracting stamp from image fullrun_mos1_xmm0111020101_pi300-10000_cl_sm2.00.img.gz, (315, 258) - (348, 292)
[Mon May 21 00:09:26 2012] XMMSAS bgd. selection expression = annulus(28781.801000, 23872.141200, 484.174014, 968.348028, X, Y) && !ellipse(27272.936740, 24215.396000, 1162.536033, 1162.536033, 0.000000, X, Y)
[Mon May 21 00:09:26 2012] Writing fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src1.gif
[Mon May 21 00:09:35 2012] Mean detx,y = (-3980.62, 1042.90) 
[Mon May 21 00:09:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 00:09:53 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 00:09:53 2012] Setting source spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 00:09:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 21 01:47:46 2012] Updating aperture counts using extracted products
[Mon May 21 01:47:46 2012] Error reading totcts from fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 01:47:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 01:47:46 2012] Using photon index=1.80, rate=0.00787, arf fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src1.arf
[Mon May 21 01:47:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 01:47:46 2012] Updating source flux to 1.1e-13
[Mon May 21 01:49:35 2012] Reading fit data from xmm0111020101/analysis//spectral/fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 21 01:49:35 2012] Spectral fit parameter nH value = 5.89033e+21
[Mon May 21 01:49:35 2012] Spectral fit parameter PhoIndex value = 6.72238
[Mon May 21 01:49:35 2012] Failed to get F(0.3-8.0) from xmm0111020101/analysis//spectral/fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 21 01:49:35 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 01:49:35 2012] Using Nh = 5.9e+21, photon index=6.72, rate=0.00787, arf fullrun_mos1_xmm0111020101_pi300-10000_pass1_cl_src1.arf
[Mon May 21 01:49:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 01:49:35 2012] Updating source flux to 6.4e-14