[Fri Aug 31 00:09:44 2012] Detection parameters:
  Position = (314.9, 296.1) = 0 18 33.96 16 25 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.2 +/- 8.8
  Background counts = 4.0
  Rate = 0.01 +/- 0.003

[Fri Aug 31 00:09:44 2012] Off-axis axis estimate = 1.20'
[Fri Aug 31 00:10:37 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:10:37 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Fri Aug 31 00:10:37 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Fri Aug 31 00:10:37 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.03"
[Fri Aug 31 00:38:49 2012] fullrun_pn_xmm0111000201_pi300-10000_cl_pass0_src17.ximg exists
[Fri Aug 31 00:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000201_pi300-10000_cl_pass0_src17.csv
[Fri Aug 31 00:38:49 2012] fullrun_pn_xmm0111000201_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Aug 31 00:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000201_pi300-10000_cl_pass0_src17.csv
[Fri Aug 31 00:38:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 00:38:49 2012] fullrun_pn_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Aug 31 00:38:49 2012] fullrun_pn_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Aug 31 00:38:49 2012] Fit fullrun_pn_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Aug 31 02:23:42 2012] Source 17 is offset by -2.052693 and -7.328080 pixels which is larger than
2 X fitted extent = 6.465196 x 6.465196, not incorporating fit results
[Fri Aug 31 02:23:42 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 02:23:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 02:23:42 2012] Assessing source extent using major
[Fri Aug 31 02:23:42 2012] Source does appear to be extended
[Fri Aug 31 02:23:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 02:23:53 2012] Using EEF radius (= 7.03 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 02:23:53 2012] Initial guess for spatial extent in simple fitting = 7.03"
[Fri Aug 31 02:23:53 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.893
[Fri Aug 31 02:23:53 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.03"
[Fri Aug 31 02:56:57 2012] fullrun_pn_xmm0111000201_pi300-10000_cl_pass1_src15.ximg exists
[Fri Aug 31 02:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000201_pi300-10000_cl_pass1_src15.csv
[Fri Aug 31 02:56:57 2012] fullrun_pn_xmm0111000201_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri Aug 31 02:56:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000201_pi300-10000_cl_pass1_src15.csv
[Fri Aug 31 02:56:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 02:56:57 2012] fullrun_pn_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri Aug 31 02:56:57 2012] fullrun_pn_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri Aug 31 02:56:57 2012] Fit fullrun_pn_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri Aug 31 04:26:27 2012] Source 17 is offset by 9.447735 and 0.692150 pixels which is larger than
2 X fitted extent = 1.694377 x 1.694377, not incorporating fit results
[Fri Aug 31 04:26:27 2012] Source 17 is offset by -1.155417 and -7.328080 pixels which is larger than
2 X fitted extent = 6.465196 x 6.465196, not incorporating fit results
[Fri Aug 31 04:26:27 2012] Spatial fit model total counts = 194.507000, observed total counts = 195.000000
[Fri Aug 31 04:26:27 2012] Offset between fit and detection position for source 17 = 6.051380 pixels
[Fri Aug 31 04:26:27 2012] Warning, changing simple spatial fit ID from 15 to 16
[Fri Aug 31 04:26:27 2012] 195.334800 total counts/ 114.388000 bgd. counts: snr = 7.568494
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 6.051380 pixels
  Position = (319.6, 300.0) = 0 18 32.56 16 25 24.8
  Extent = 29.4 (29.3-58.7)", rotation angle = 0
  Source counts = 80.9 +/- 14.0
  Background counts = 114.4
  Rate = 0.03 +/- 0.004
[Fri Aug 31 04:26:27 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 04:26:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 04:26:27 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 04:26:27 2012] Source does appear to be extended
[Fri Aug 31 04:26:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 04:26:27 2012] Source is confused with source 15
[Fri Aug 31 04:26:37 2012] XMMSAS src. selection expression = ellipse(27752.464000, 26051.440000, 1761.660051, 1761.660051, 0.000000, X, Y)
[Fri Aug 31 04:26:37 2012] Writing source region out to fullrun_pn_xmm0111000201_pi300-10000_pass1_cl_src17_src.reg
[Fri Aug 31 04:26:37 2012] Extracting stamp from image fullrun_pn_xmm0111000201_pi300-10000_cl_sm2.00.img.gz, (218, 199) - (421, 401)
[Fri Aug 31 04:26:37 2012] XMMSAS bgd. selection expression = annulus(27752.464000, 26051.440000, 2936.100084, 5872.200169, X, Y) && !ellipse(27534.149282, 27224.758224, 1179.288034, 1176.091162, 38.154086, X, Y) && !ellipse(27533.650400, 26896.626600, 1982.840057, 1982.840057, 0.000000, X, Y) && !ellipse(27366.922760, 26873.804400, 1147.168033, 1147.168033, 0.000000, X, Y) && !ellipse(25162.809600, 20203.740700, 450.817235, 450.817235, 0.000000, X, Y) && !ellipse(27975.177920, 30853.555000, 452.311213, 452.311213, 0.000000, X, Y) && !ellipse(27041.656006, 28723.853363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26225.149536, 27001.655334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29108.646759, 26568.973175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28479.699524, 26060.678436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28045.345400, 24834.214000, 1174.440034, 1174.440034, 0.000000, X, Y)
[Fri Aug 31 04:26:37 2012] Writing fullrun_pn_xmm0111000201_pi300-10000_pass1_cl_src17.gif
[Fri Aug 31 04:31:23 2012] Mean detx,y = (343.44, 179.72) 
[Fri Aug 31 04:31:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 04:32:17 2012] grppha failed
[Fri Aug 31 04:32:17 2012] Setting source spectrum file to fullrun_pn_xmm0111000201_pi300-10000_pass1_cl_src17_src.pi.gz
[Fri Aug 31 04:32:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111000201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Aug 31 04:32:39 2012] Not generating rmf since there are only 80 counts
[Fri Aug 31 04:32:39 2012] rmf not generated due to insufficient counts
[Fri Aug 31 04:37:01 2012] Updating aperture counts using extracted products
[Fri Aug 31 04:37:01 2012] Error reading totcts from fullrun_pn_xmm0111000201_pi300-10000_pass1_cl_src17_src.pi.gz
[Fri Aug 31 04:37:01 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 04:37:04 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Fri Aug 31 04:37:04 2012] Flag c found in src. 17 procflags, skipping spectral fitting
[Fri Aug 31 04:37:04 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 04:37:05 2012] xmm0111000201/analysis//spectral/fullrun_pn_xmm0111000201_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete