[Fri Aug 31 00:10:12 2012] Detection parameters:
  Position = (323.0, 320.8) = 0 18 31.52 16 26 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.8 +/- 12.8
  Background counts = 2.3
  Rate = 0.007 +/- 0.003

[Fri Aug 31 00:10:12 2012] Off-axis axis estimate = 2.41'
[Fri Aug 31 01:19:26 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 01:19:26 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Fri Aug 31 01:19:26 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.787
[Fri Aug 31 01:19:26 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.63"
[Fri Aug 31 02:23:38 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_src12.ximg exists
[Fri Aug 31 02:23:38 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Aug 31 02:23:38 2012] Fit fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_src12 appears to have run properly
[Fri Aug 31 02:23:39 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Aug 31 02:23:39 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Aug 31 02:23:39 2012] Fit fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Aug 31 02:23:48 2012] Spatial fit model total counts = 416.466000, observed total counts = 357.000000
[Fri Aug 31 02:23:48 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 02:23:48 2012] Source 18 is offset by -3.139638 and -6.532972 pixels which is larger than
2 X fitted extent = 7.017701 x 0.877209, not incorporating fit results
[Fri Aug 31 02:23:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 02:23:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 02:23:48 2012] Assessing source extent using major
[Fri Aug 31 02:23:48 2012] Source does appear to be extended
[Fri Aug 31 02:23:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 02:23:48 2012] Source is confused with source 5
[Fri Aug 31 02:23:48 2012] Source is confused with source 4
[Fri Aug 31 03:30:10 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 03:30:10 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Fri Aug 31 03:30:10 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.787
[Fri Aug 31 03:30:10 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.63"
[Fri Aug 31 04:26:23 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src11.ximg exists
[Fri Aug 31 04:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src11.csv
[Fri Aug 31 04:26:23 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Aug 31 04:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src11.csv
[Fri Aug 31 04:26:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 04:26:24 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Aug 31 04:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Aug 31 04:26:24 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Aug 31 04:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Fri Aug 31 04:26:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 04:26:31 2012] Spatial fit model total counts = 398.987000, observed total counts = 357.000000
[Fri Aug 31 04:26:31 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 04:26:31 2012] Warning, spatial fit 11 centroid is now closest to src. 4
[Fri Aug 31 04:26:31 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 04:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 04:26:31 2012] Assessing source extent using major
[Fri Aug 31 04:26:31 2012] Source does appear to be extended
[Fri Aug 31 04:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 04:34:45 2012] XMMSAS src. selection expression = ellipse(28050.325531, 27859.925415, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 04:34:45 2012] Writing source region out to fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src18_src.reg
[Fri Aug 31 04:34:45 2012] Extracting stamp from image fullrun_mos2_xmm0111000201_pi300-10000_cl_sm2.00.img.gz, (285, 283) - (360, 358)
[Fri Aug 31 04:34:45 2012] XMMSAS bgd. selection expression = annulus(28050.325531, 27859.925415, 1087.500000, 2175.000000, X, Y) && !ellipse(27616.826600, 26825.801600, 1148.016033, 1148.016033, 0.000000, X, Y) && !ellipse(27991.099792, 30801.257141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27473.441573, 27628.615469, 1568.200045, 1242.918977, 90.000000, X, Y) && !ellipse(28132.822601, 27453.432465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28495.393007, 26475.005001, 1180.320034, 1051.558919, 80.826902, X, Y) && !ellipse(27327.422119, 27958.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26160.096000, 27754.942000, 1142.472033, 1142.472033, 0.000000, X, Y) && !ellipse(28106.150177, 25903.506012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28927.595001, 27259.806488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29050.796326, 26135.778595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27648.930000, 25187.788400, 1180.320034, 1032.328030, 22.784900, X, Y)
[Fri Aug 31 04:34:45 2012] Writing fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src18.gif
[Fri Aug 31 04:36:06 2012] Mean detx,y = (18.01, 775.61) 
[Fri Aug 31 04:36:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 04:36:12 2012] grppha failed
[Fri Aug 31 04:36:12 2012] Setting source spectrum file to fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src18_src.pi.gz
[Fri Aug 31 04:36:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Aug 31 04:36:55 2012] Not generating rmf since there are only 34 counts
[Fri Aug 31 04:36:55 2012] rmf not generated due to insufficient counts
[Fri Aug 31 04:37:01 2012] Updating aperture counts using extracted products
[Fri Aug 31 04:37:01 2012] Error reading totcts from fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src18_src.pi.gz
[Fri Aug 31 04:37:01 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 04:37:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 04:37:04 2012] xmm0111000201/analysis//spectral/fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete