[Fri Aug 31 00:10:12 2012] Detection parameters:
  Position = (461.4, 223.3) = 0 17 49.68 16 19 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.6 +/- 14.3
  Background counts = 1.1
  Rate = 0.02 +/- 0.003

[Fri Aug 31 00:10:12 2012] Off-axis axis estimate = 13.01'
[Fri Aug 31 01:19:26 2012] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 01:19:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 01:19:26 2012] Initial guess for spatial extent in simple fitting = 12.94"
[Fri Aug 31 01:19:26 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.015
[Fri Aug 31 01:19:26 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.94"
[Fri Aug 31 02:23:38 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 31 02:23:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_src3.csv
[Fri Aug 31 02:23:38 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 31 02:23:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_src3.csv
[Fri Aug 31 02:23:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 02:23:38 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 31 02:23:38 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 31 02:23:38 2012] Fit fullrun_mos2_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Aug 31 02:23:48 2012] Spatial fit model total counts = 138.084000, observed total counts = 139.000000
[Fri Aug 31 02:23:48 2012] Offset between fit and detection position for source 1 = 0.269715 pixels
[Fri Aug 31 02:23:48 2012] 138.853000 total counts/ 53.634900 bgd. counts: snr = 11.636118
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.269715 pixels
  Position = (461.3, 223.5) = 0 17 49.73 16 19 51.5
  Extent = 5.7 (4.7-7.3)", rotation angle = 0
  Source counts = 85.2 +/- 11.8
  Background counts = 53.6
  Rate = 0.02 +/- 0.002
[Fri Aug 31 02:23:48 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 02:23:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 02:23:48 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 02:23:48 2012] Source does appear to be extended
[Fri Aug 31 02:23:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 03:30:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 03:30:10 2012] Initial guess for spatial extent in simple fitting = 5.69"
[Fri Aug 31 03:30:10 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.918
[Fri Aug 31 03:30:10 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.69"
[Fri Aug 31 04:26:23 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 31 04:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 04:26:23 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 31 04:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src3.csv
[Fri Aug 31 04:26:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 04:26:24 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 31 04:26:24 2012] fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 31 04:26:24 2012] Fit fullrun_mos2_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Aug 31 04:26:31 2012] Spatial fit model total counts = 135.303000, observed total counts = 136.000000
[Fri Aug 31 04:26:31 2012] Offset between fit and detection position for source 1 = 0.084757 pixels
[Fri Aug 31 04:26:31 2012] 136.569400 total counts/ 55.800000 bgd. counts: snr = 10.812591
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.084757 pixels
  Position = (461.2, 223.5) = 0 17 49.76 16 19 51.6
  Extent = 5.3 (4.4-6.6)", rotation angle = 0
  Source counts = 80.8 +/- 11.7
  Background counts = 55.8
  Rate = 0.01 +/- 0.002
[Fri Aug 31 04:26:31 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 04:26:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 04:26:31 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 04:26:31 2012] Source does appear to be extended
[Fri Aug 31 04:26:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 04:34:44 2012] XMMSAS src. selection expression = ellipse(40074.665980, 19395.272600, 320.244009, 320.244009, 0.000000, X, Y)
[Fri Aug 31 04:34:44 2012] Writing source region out to fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 31 04:34:44 2012] Extracting stamp from image fullrun_mos2_xmm0111000201_pi300-10000_cl_sm2.00.img.gz, (443, 205) - (480, 242)
[Fri Aug 31 04:34:44 2012] XMMSAS bgd. selection expression = annulus(40074.665980, 19395.272600, 533.740015, 1067.480031, X, Y)
[Fri Aug 31 04:34:44 2012] Writing fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src1.gif
[Fri Aug 31 04:35:01 2012] Mean detx,y = (-14378.76, -2445.46) 
[Fri Aug 31 04:35:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 04:35:06 2012] grppha failed
[Fri Aug 31 04:35:06 2012] Setting source spectrum file to fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 04:35:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 31 04:36:54 2012] Not generating rmf since there are only 80 counts
[Fri Aug 31 04:36:54 2012] rmf not generated due to insufficient counts
[Fri Aug 31 04:37:01 2012] Updating aperture counts using extracted products
[Fri Aug 31 04:37:01 2012] Error reading totcts from fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Aug 31 04:37:01 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 04:37:03 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 04:37:04 2012] xmm0111000201/analysis//spectral/fullrun_mos2_xmm0111000201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete