[Fri Aug 31 00:09:58 2012] Detection parameters:
  Position = (327.8, 317.0) = 0 18 30.06 16 26 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.8 +/- 8.1
  Background counts = 2.2
  Rate = 0.006 +/- 0.001

[Fri Aug 31 00:09:58 2012] Off-axis axis estimate = 2.52'
[Fri Aug 31 00:38:49 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 00:38:49 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Aug 31 00:38:49 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Fri Aug 31 00:38:49 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.69"
[Fri Aug 31 01:19:25 2012] fullrun_mos1_xmm0111000201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug 31 01:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000201_pi300-10000_cl_pass0_src13.csv
[Fri Aug 31 01:19:25 2012] fullrun_mos1_xmm0111000201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug 31 01:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000201_pi300-10000_cl_pass0_src13.csv
[Fri Aug 31 01:19:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 01:19:25 2012] fullrun_mos1_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug 31 01:19:25 2012] fullrun_mos1_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug 31 01:19:25 2012] Fit fullrun_mos1_xmm0111000201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Aug 31 02:23:45 2012] Source 11 is offset by -0.153497 and -1.389729 pixels which is larger than
2 X fitted extent = 0.855407 x 0.855407, not incorporating fit results
[Fri Aug 31 02:23:45 2012] Warning, spatial fit 13 centroid is now closest to src. 5
[Fri Aug 31 02:23:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 02:23:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 02:23:45 2012] Assessing source extent using major
[Fri Aug 31 02:23:45 2012] Source does appear to be extended
[Fri Aug 31 02:23:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 02:56:57 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 02:56:57 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Aug 31 02:56:57 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.778
[Fri Aug 31 02:56:57 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.69"
[Fri Aug 31 03:30:10 2012] fullrun_mos1_xmm0111000201_pi300-10000_cl_pass1_src8.ximg exists
[Fri Aug 31 03:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000201_pi300-10000_cl_pass1_src8.csv
[Fri Aug 31 03:30:10 2012] fullrun_mos1_xmm0111000201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Aug 31 03:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000201_pi300-10000_cl_pass1_src8.csv
[Fri Aug 31 03:30:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 03:30:10 2012] fullrun_mos1_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Aug 31 03:30:10 2012] fullrun_mos1_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Aug 31 03:30:10 2012] Fit fullrun_mos1_xmm0111000201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Aug 31 04:26:29 2012] Source 11 is offset by -0.095497 and -1.300810 pixels which is larger than
2 X fitted extent = 1.114506 x 1.114506, not incorporating fit results
[Fri Aug 31 04:26:29 2012] Warning, spatial fit 8 centroid is now closest to src. 5
[Fri Aug 31 04:26:29 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 04:26:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 04:26:29 2012] Assessing source extent using major
[Fri Aug 31 04:26:29 2012] Source does appear to be extended
[Fri Aug 31 04:26:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 04:26:29 2012] Source is confused with source 2
[Fri Aug 31 04:26:29 2012] Source is confused with source 5
[Fri Aug 31 04:32:39 2012] XMMSAS src. selection expression = ellipse(28471.439728, 27533.189545, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 04:32:39 2012] Writing source region out to fullrun_mos1_xmm0111000201_pi300-10000_pass1_cl_src11_src.reg
[Fri Aug 31 04:32:39 2012] Extracting stamp from image fullrun_mos1_xmm0111000201_pi300-10000_cl_sm2.00.img.gz, (290, 280) - (365, 355)
[Fri Aug 31 04:32:39 2012] XMMSAS bgd. selection expression = annulus(28471.439728, 27533.189545, 1087.500000, 2175.000000, X, Y) && !ellipse(27663.290000, 26790.404000, 2538.408073, 2538.408073, 0.000000, X, Y) && !ellipse(27872.696000, 27002.396000, 1220.960035, 1220.960035, 0.000000, X, Y) && !ellipse(27020.136993, 27525.991760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26429.116000, 27928.632000, 1158.768033, 1158.768033, 0.000000, X, Y) && !ellipse(28814.568000, 26180.128000, 1269.296037, 1269.296037, 0.000000, X, Y) && !ellipse(30079.148000, 26876.492000, 1269.296037, 1269.296037, 0.000000, X, Y) && !ellipse(25712.566925, 27453.913025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27502.707153, 25626.862579, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 04:32:39 2012] Writing fullrun_mos1_xmm0111000201_pi300-10000_pass1_cl_src11.gif
[Fri Aug 31 04:33:37 2012] Mean detx,y = (842.38, 318.82) 
[Fri Aug 31 04:33:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 04:33:42 2012] grppha failed
[Fri Aug 31 04:33:42 2012] Setting source spectrum file to fullrun_mos1_xmm0111000201_pi300-10000_pass1_cl_src11_src.pi.gz
[Fri Aug 31 04:33:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111000201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Aug 31 04:34:44 2012] Not generating rmf since there are only 32 counts
[Fri Aug 31 04:34:44 2012] rmf not generated due to insufficient counts
[Fri Aug 31 04:37:01 2012] Updating aperture counts using extracted products
[Fri Aug 31 04:37:01 2012] Error reading totcts from fullrun_mos1_xmm0111000201_pi300-10000_pass1_cl_src11_src.pi.gz
[Fri Aug 31 04:37:01 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 04:37:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 04:37:03 2012] xmm0111000201/analysis//spectral/fullrun_mos1_xmm0111000201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete