[Sat Aug 11 10:26:45 2012] Detection parameters:
  Position = (322.3, 355.2) = 0 18 31.72 16 29 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2356.2 +/- 59.0
  Background counts = 31.7
  Rate = 0.1 +/- 0.003

[Sat Aug 11 10:26:48 2012] Off-axis axis estimate = 4.46'
[Sat Aug 11 10:31:59 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:31:59 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Sat Aug 11 10:31:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Sat Aug 11 10:31:59 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.66"
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src8.ximg exists
[Sat Aug 11 13:13:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src8.csv
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Aug 11 13:13:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src8.csv
[Sat Aug 11 13:13:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 13:13:07 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Aug 11 13:13:07 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Aug 11 13:13:07 2012] Fit fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Aug 11 16:30:06 2012] Spatial fit model total counts = 2438.010000, observed total counts = 2438.000000
[Sat Aug 11 16:30:06 2012] Offset between fit and detection position for source 8 = 0.208598 pixels
[Sat Aug 11 16:30:06 2012] 2421.626000 total counts/ 727.236000 bgd. counts: snr = 62.831249
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.208598 pixels
  Position = (322.1, 355.3) = 0 18 31.77 16 29 25.4
  Extent = 5.7 (5.5-6.0)", rotation angle = 0
  Source counts = 1694.4 +/- 49.2
  Background counts = 727.2
  Rate = 0.06 +/- 0.002
[Sat Aug 11 16:30:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:07 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 16:30:07 2012] Source does appear to be extended
[Sat Aug 11 16:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 16:30:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 16:30:50 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Sat Aug 11 16:30:50 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.213
[Sat Aug 11 16:30:50 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 5.73"
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src8.ximg exists
[Sat Aug 11 18:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src8.csv
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Aug 11 18:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src8.csv
[Sat Aug 11 18:09:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 18:09:45 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Aug 11 18:09:45 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Aug 11 18:09:45 2012] Fit fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Aug 11 21:10:49 2012] Spatial fit model total counts = 2438.000000, observed total counts = 2438.000000
[Sat Aug 11 21:10:49 2012] Offset between fit and detection position for source 8 = 0.000054 pixels
[Sat Aug 11 21:10:49 2012] 2421.609000 total counts/ 728.329000 bgd. counts: snr = 62.742956
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.000054 pixels
  Position = (322.1, 355.3) = 0 18 31.77 16 29 25.4
  Extent = 5.7 (5.5-6.0)", rotation angle = 0
  Source counts = 1693.3 +/- 49.2
  Background counts = 728.3
  Rate = 0.06 +/- 0.002
[Sat Aug 11 21:10:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:10:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:10:49 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:10:49 2012] Source does appear to be extended
[Sat Aug 11 21:10:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 21:11:35 2012] Counts = 1693.280000, rescaling region sizes by 2.000000
[Sat Aug 11 21:11:35 2012] XMMSAS src. selection expression = ellipse(27977.636760, 30863.250800, 685.971620, 685.971620, 0.000000, X, Y)
[Sat Aug 11 21:11:35 2012] Writing source region out to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src8_src.reg
[Sat Aug 11 21:11:35 2012] Extracting stamp from image fullrun_pn_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (283, 316) - (362, 395)
[Sat Aug 11 21:11:35 2012] XMMSAS bgd. selection expression = annulus(27977.636760, 30863.250800, 2286.572066, 4573.144132, X, Y) && !ellipse(27632.952000, 26905.696000, 2502.576072, 2502.576072, 0.000000, X, Y) && !ellipse(24043.121674, 36062.895966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27368.174164, 28572.625549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27901.604065, 28304.377319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28788.262000, 25756.430000, 1251.288036, 1251.288036, 0.000000, X, Y) && !ellipse(31492.148865, 30957.091431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27124.179626, 29523.577393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.102753, 28892.705261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28792.002655, 27984.313538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.598755, 27670.207642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24200.622000, 26321.083600, 519.624015, 328.303209, 67.738229, X, Y) && !ellipse(29122.162000, 25097.436000, 1212.128035, 1212.128035, 0.000000, X, Y) && !ellipse(27236.564000, 25055.558000, 1256.304036, 1256.304036, 0.000000, X, Y)
[Sat Aug 11 21:11:35 2012] Writing fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src8.gif
[Sat Aug 11 21:34:49 2012] Mean detx,y = (-923.55, -3869.83) 
[Sat Aug 11 21:34:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 21:36:06 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 21:36:07 2012] Setting source spectrum file to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Aug 11 21:36:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Aug 12 15:42:13 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:13 2012] Error reading totcts from fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Aug 12 15:42:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:16 2012] Using photon index=1.80, rate=0.0581, arf fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src8.arf
[Sun Aug 12 15:42:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:16 2012] Updating source flux to 1.9e-13