[Sat Aug 11 10:26:47 2012] Detection parameters:
  Position = (395.5, 306.9) = 0 18 9.59 16 25 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.7 +/- 13.2
  Background counts = 24.3
  Rate = 0.004 +/- 0.0006

[Sat Aug 11 10:26:48 2012] Off-axis axis estimate = 7.07'
[Sat Aug 11 10:31:59 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:31:59 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Sat Aug 11 10:31:59 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.964
[Sat Aug 11 10:31:59 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 9.96"
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src51.ximg exists
[Sat Aug 11 13:13:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src51.csv
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat Aug 11 13:13:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src51.csv
[Sat Aug 11 13:13:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 13:13:07 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat Aug 11 13:13:07 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat Aug 11 13:13:07 2012] Fit fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sat Aug 11 16:30:07 2012] Warning, spatial fit 51 centroid is now closest to src. 55
[Sat Aug 11 16:30:07 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 11.494859 pixels away
[Sat Aug 11 16:30:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:07 2012] Assessing source extent using major
[Sat Aug 11 16:30:07 2012] Source does appear to be extended
[Sat Aug 11 16:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 16:30:50 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 16:30:50 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Sat Aug 11 16:30:50 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.964
[Sat Aug 11 16:30:50 2012] Giving source the simple spatial ID 41 for pass 1, mean size = 9.96"
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src41.ximg exists
[Sat Aug 11 18:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src41.csv
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Aug 11 18:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src41.csv
[Sat Aug 11 18:09:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 18:09:45 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Aug 11 18:09:45 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Aug 11 18:09:45 2012] Fit fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sat Aug 11 21:10:49 2012] Source 53 is offset by -1.487197 and 5.429428 pixels which is larger than
2 X fitted extent = 1.499526 x 1.499526, not incorporating fit results
[Sat Aug 11 21:10:50 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:10:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:10:50 2012] Assessing source extent using major
[Sat Aug 11 21:10:50 2012] Source does appear to be extended
[Sat Aug 11 21:10:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 21:11:36 2012] XMMSAS src. selection expression = ellipse(34361.757629, 26656.042206, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 11 21:11:36 2012] Writing source region out to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src53_src.reg
[Sat Aug 11 21:11:36 2012] Extracting stamp from image fullrun_pn_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (358, 269) - (433, 344)
[Sat Aug 11 21:11:36 2012] XMMSAS bgd. selection expression = annulus(34361.757629, 26656.042206, 1087.500000, 2175.000000, X, Y)
[Sat Aug 11 21:11:36 2012] Writing fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src53.gif
[Sat Aug 11 22:10:02 2012] Mean detx,y = (6614.52, -2174.27) 
[Sat Aug 11 22:10:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 22:10:39 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 22:10:39 2012] Setting source spectrum file to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sat Aug 11 22:10:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sun Aug 12 11:09:49 2012] Not generating rmf since there are only 85 counts
[Sun Aug 12 11:09:49 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:15 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:15 2012] Error reading totcts from fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun Aug 12 15:42:17 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:17 2012] Using photon index=1.80, rate=0.00411, arf fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src53.arf
[Sun Aug 12 15:42:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:17 2012] Updating source flux to 1.4e-14
[Sun Aug 12 15:45:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting